Alphamount APPSTVS12 User manual

Model: APPSTVS12
Table Top TV Stand Instruction
Manual
V3.0
Thank you for choosing this alphamount product! At alphamount we strive to
provide you with the best quality products and services in the industry. Should
you have any issues, please don't hesitate to contact at
[email protected] (US/CA/DE/UK/FR/IT/ES/AU)

P1
IMPORTANT SAFETY INFORMATION
Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact
our customer service at [email protected].
CAUTION: Avoid potential personal injuries and property damage!
Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We are not liable for damage or injury
caused by improper mounting, incorrect assembly or inappropriate use.
Check the VESA Pattern of TV before the Installation
Minimum VESA pattern: 100mm/4 in.(W)x100mm/4 in.(H)
If your TV VESA is greater than 400x400 mm/16x16 in. or less than
VESA 100x100mm/4x4in., this TV stand is NOT compatible.
If this TV stand is NOT compatible, please contact customer
service at [email protected] to find a compatible product.
MAX: 400mm/16 in.
MAX: 400mm/16 in.
100 mm ≈ 4 in.
200 mm ≈ 7 7/8 in.
300 mm ≈ 11 3/4 in.
400 mm ≈ 15 3/4 in.
Tools Needed (Not lncluded)
Phillips Screwdriver

P2
WARNING: This product contains small items that could be a choking
hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not
use damaged or defective parts. lf you require replacement parts, contact our
customer service at [email protected].
• Please note: Not all hardware included in this package will be used.
Supplied Parts and Hardware
Supplied Parts and Hardware for Step 1
Supplied Parts and Hardware for Step 2
(H) x4
Rubber Foot
(E) x3
D8.5xD18.0x1.5mm
Washer
Note: The bolt is shown in
accordance with the actual size
(A) x3
M8x25mm Bolt
(I) x1
13/64in. (5mm)
Allen Key
x1
Tempered Glass Base
7
x1
Plastic Cover
5
x1
Lower Support Pillar
3
(G) x1
D10.5xD30.0x2.5mm
Washer
(F) x2
D10.5xD28.0x1.0mm
Plastic Washer
x1
Upper Support Pillar
4
(B) x1
M10 Nut
(J) x1
M6-M10
Wrench

(M-A) x4
M4x30mm
Bolts
(M-B) x4
M6x15mm
Bolts
(M-C) x4
M6x35mm
Bolts
(M-D) x4
M8x20mm
Bolts
(M-E) x4
M8x35mm
Bolts
(M-F) x4
M8x50mm
Bolts
P3
(M-G) x8
φ8.5x18x2.5mm
Spacers
(M-H) x4
φ8.5x18x10mm
Spacers
(M-I) x4
φ8.5x18x22mm
Spacers
Note: The bolts and spacers are shown in accordance with the actual size
Supplied Part and Hardware for Step 3
Supplied Parts and Hardware for Step 4
x1
TV Plate
1
x2
TV Bracket
2
x2
Cable Clip
8
(K) x4
D4/D6/D8
Washer
(D) x4
M6 Nut
(J) x1
M6-M10
Wrench

Place rubber feet [H] to the frosted side of the tempered glass
base [7] in the corners
Note: Kindly note that the tempered glass base is designed to show the
shiny glass side facing up
Step 1-1
Connect the lower support pillar [3] to tempered glass base [7]
Step 1-2
Note: Make sure the side with the wire clip holes on the support pillar
faces the back of the stand
P4
Secure the lower support pillar [3] to tempered glass base [7] using plastic
cover [5], washers [E], bolts [A] and allen key [I]
Note: You may need
assistance with this step.
Supplied Part and Hardware for Step 5
Step 1 Assemble the Base
H
Front Side
Back Side
I
x2
Safety Lock
6
7
3
5
A
I
E
Table
3
7
7

P5
Step 2 Connect the Upper Support Pillar [4] to Lower Support Pillar [3]
Note: There are three choices for height adjustment. You can choose your
desired height position while connecting the TV plate [1] to upper support
pillar [4]
The First Choice
The First Choice
The Second Choice
The Second Choice
The Third Choice
The Third Choice
Step 3 Connect the TV Plate [1] to Upper Support Pillar [4]
4
3
B
G
F
J

Only one bolt size fits your TV.
Select TV Bolts
P6
Step 4 Secure the TV Brackets [2] to TV
Too Long
Correct Correct
Too Short
Bolt length: Verify adequate thread engagement with bolts or bolts/spacers
combination. We recommend thread engagement by at least 5 turns.
-Too short will not hold the TV.
-Too long will damage the TV.
Note: If necessary, the spacers can be used in multi-layer. If the installation
fails after trying various methods, please contact customer service at
[email protected].
M4 M6 M8
Attach the cable clips [8]
to lower support pillar [3]
J
1
4
3
8
D

P7
Option B (For Round Back TV)
Option A (For Flat Back TV )
2CAUTION: Ensure the TV brackets
[2] are EQUALLY CENTERED on your
TV AND securely fastened in place.
2
2
2
2
K
M-A/M-B/M-D
M-G/M-H
(If needed)
K
M-A / M-C
M-E / M-F
M-G TO M-I
Alternate Spacer
Setups
Note: Keep
the arrow up
Alternate
Spacer
Setups
Note: Keep
the arrow up

Option D
For cable interference or inset holes, use spacers [M-G], [M-H] and [M-I]
to create extra space between the TV and TV brackets
P8
Spacers may be necessary for 2 holes ONLY.
Option C (For TV with A “Bump”)
M-A / M-C
M-E / M-F
M-G TO M-I
K
2
Note: Keep
the arrow up
2
2
K
M-A / M-C
M-E / M-F
M-G TO M-I M-A/M-B/M-D
K
Alternate Spacer
Setups
Alternate Spacer
Setups
Alternate
Spacer
Setups
2

6
①
②
P9
Step 5-1 Hang the TV with brackets to the TV plate
Step 5-2 Push the bottom of the TV to TV plate
Step 5-3 Insert the safety locks [6] into the upward facing hooks at the
midway to lower part of the TV bracket. Please note this is where the lower
part of the TV bracket meets the lower part of TV plate. Then tighten the
bolts of the safety lock [6] until the bolts touch the TV plate.
Step 5 Secure TV to TV Plate
1. Loosen the nut [B] using wrench [J]
2. Swivel the TV to your desired swivel angle.
3. Tighten the nut [B] using wrench [J] to fix the TV in place
Note: Please do not over-loosen or over-tighten the nut [B]
Step 6 Adjust Angle of TV Stand
TV brackets are three-height-adjustable. You can choose the proper height.
Note: Please note, there is
no bolt holes in the TV plate.
The First Choice The Second Choice The Third Choice
HEAVY! You may need
assistance with this step.
“Be gentle”
③
J
B
4

All of us at Alphamount do appreciate your product purchase. We hope that you
are as happy with your product as we are designing and manufacturing it for
you. We strive to provide you with the best quality products and services in the
industry. Should you have any issues, please don't hesitate to contact us at
[email protected] (US/CA/DE/UK/FR/IT/ES/AU)
Thank you again for
choosing this Alphamount product!