Altec Lansing SoundRover 180 User manual

ITEM: IMT7002
QUICK START GUIDE
SOUNDROVER
WIRELESS PARTY SPEAKER
180W PEAK POWER
WIRELESS PARTY SPEAKER

180W PEAK POWER
WIRELESS PARTY SPEAKER
IN THE BOX
1.
IMT7002 SoundRover
Wireless Party Speaker
Wired Microphone
Power Cable

MIC IN: to connect
the included
microphone
AUX IN: to connect
an auxiliary cable
(not included)
USB Port: to charge
mobile devices and
tablets
Power
Switch
AC Input: to
connect to included
power cable
INPUT/ OUTPUT PORTS
2.

Bluetooth/
Pair Modes
Radio and
Auxiliary
Modes
Play and Pause/
Hold FM Scan
Turn knob to adjust
the microphone’s
volume
Turn knob to adjust
the bass
Turn knob to adjust
the treble
Turn knob to adjust
the speaker’s
volume
Previous/
Scan
Forward/
Scan
Display Screen
Light
Mode
SPEAKER CONTROLS
3.

AL SoundRover
Bluetooth
AUDIO MODES
4.
Bluetooth Pairing:
Go to the Bluetooth page in Settings. Make sure
Bluetooth is on before connecting to the available
device “AL SoundRover”.
If the speaker does not automatically go into pairing
after turning it on press the BT/Pair button.
FM Radio:
1. Press and hold the Play/Pause button to perform a
scan of the FM band. The SoundRover will store the
strongest stations as presets.
2. Press the Next/Scan and Previous/Scan buttons to
move a preset.
3. Press and hold the Next/Scan and Previous/Scan
buttons to scan to the next strongest radio station.

LIGHT MODE
5.
Press the Light Mode button to toggle through the
dierent modes. Press and hold the button for three
seconds to turn the side LEDs ON/OFF.
Mode 1: Multicolor swirl
Mode 2: Back and forth
Mode 3: Thin swirl
Mode 4: Slow multicolor ring
Mode 5: Fast multicolor ring
Mode 6: Multicolor ring
Mode 7: Slow multicolor, growing ring
Mode 8: Fast multicolor, growing ring

The SoundRover has the True Wireless function. If you
own two SoundRovers, follow the directions below to
pair them together.
1. Turn the first speaker on and pair it to a Bluetooth
compatible device.
2. Press and hold the Bluetooth/Pair button on the first
speaker for two seconds. ‘HOST’ will appear on the
display screen indicating it is the main speaker.
3. Turn on the second speaker. Press the
Bluetooth/Pair button and ‘BT’ will appear on the
display screen. When this appears the first speaker
will automatically connect to the second speaker.
4. To disconnect the True Wireless function press the
Bluetooth button on either speaker.
Host
BT
TRUE WIRELESS
6.

MICROPHONE
7.
Connect the included microphone into the
Microphone jack to sing along to music.
Adjust the volume of the microphone by turning the
the Mic Level knob.

SAFETY PRECAUTIONS
8.
SPECIFICATIONS
9.
Bluetooth Spec: V4.2
Bluetooth Range: up to 33 Feet
Power Supply: AC100-240V
Battery Type: 11.1V, 7000 mAh Lithium Ion Battery
Output: 60 W
Charge Time: Approximately 5 hours
Play Time: Approximately 6 Hours