Alto-Shaam FryTech ASF-60G User manual

FryFry
TechTech
®
DUE TO ONGOING PRODUCT IMPROVEMENT,S P E C I F I C AT I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U .S.A. #363 - 01/09
The Alto-Shaam ASF-60G open gas fryer cabinet is constructed of stainless steel and includes heavy duty leveling
casters mounted on both front and rear. The fryer is provided with a power burner and heat exchanger with a
fan-assisted combustion system. The 10 gauge stainless steel fry tank holds 62 pounds (28 kg) of frying compound.
Includes two (2) fry baskets and a cleaning brush set. Fryer has a temperature range of 200°F to 390°F
(93°C to 199°C). Solid-state control provides precise temperature control.
■■ASF-60G pen Gas Fryer with Basic Control
• Impressive 66% efficiency.
• Energy Star rated.
• Quick oil temperature recovery.
• Lowest flue temperatures.
• Stainless steel front, sides and tank.
• Dual, solid-state controls with electronic ignition.
• Melt cycle for solid or liquid shortening.
• 7-year limited fry tank warranty.
FACT RY INSTALLED PTI NS
■■Automatic Basket Lifts
■■Deluxe Control
➥Programmable memory for up to six (6) product menu keys per lift.
■■Fryer/Dump Station Battery
➥Create a battery of ASF-60G fryers and ASF-60DS dump stations in
any combination of up to four (4).
➥Includes oil filtration system. Specify right- or left-side placement
when ordering.
ASF-60G
OPEN GAS FRYER
ITEM NO. _______________________
Shown with
optional
automatic
basket lifts
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: [phone].558.8744 U.S.A./CANADA FA : 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com

W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: [phone].558.8744 U.S.A./CANADA FA : 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
C A PA C I T Y
SHORTENING/OIL:
62 lb (28 kg) MAXIMUM
LOAD CAPACITY:
8 lb (4 kg) MAXIMUM
33-5/8"(854mm)
23-3/8"
(592mm)
47-1/2"(1206mm)
6-5/8"
(168mm)
5-7/16"
(142mm) Gas Connection
31-1/2"(802mm) Electrical Connection
2-7/8"
(72mm)
150°
15-3/4"
(400mm)
44-3/8"(1127mm)
50-3/8"(1280mm)lift up
D U E T O O N G O I N G P R O D U C T I M P R O V E M E N T, S P E C I F I C AT I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U .S.A.
DIMENSIONS EXTERI R H x W x D:
44-3/8" x 15-3/4" x 33-5/8"
(1127mm x 400mm x 854mm)
BASKET DIMENSI NS (HXWXD)
5-7/8" x 5-3/16" x 13-13/16"
(149mm x 131mm x 351mm)
CLEARANCE REQUIREMENTS
BACK: 6" (152mm) FR NT: 25" (635mm)
PLUS:18" (457mm) minimum between the fryer flue and
the lower edge of the exhaust hood and filter media.
6" (152mm) REQUIRED N ALL SIDES
WHEN ADJACENT T C MBUSTIBLE SURFACES.
18" (457mm) REQUIRED N ALL SIDES FR M AN PEN FLAME.
INSTALLATION REQUIREMENTS
GAS C NNECTI N: 1/2" NPT
H D INSTALLATI N IS REQUIRED
CHECK PLUMBING C DES F R PR PER SUPPLY LINE SIZING
T ATTAIN MINIMUM BURNER MANIF LD PRESSURE SH WN:
NATURAL GAS:5.0" W.C. PR PANE GAS:10.0" W.C.
(1.2 kPa) (2.5 kPa)
MAXIMUM INLET PRESSURE: 14" W.C. (3.5 kPa)
N TE: If a flexible gas line is used, it must be AGA
approved, commercial type and at least 1/2" I.D.
MANUAL GAS SHUT-OFF VALVE AND RESTRAINING DEVICE
MUST BE INSTALLED PER CODE REQUIREMENTS WHEN USING A
QUIC DISCONNECT DEVICE. NOT FA CTORY SUPPLIED
WEIGHT
NET WEIGHT:248 lb (113 kg)
SHIP WEIGHT:330 lb (150 kg) EST
CART N DIMENSI NS:39" x 22" x 55" EST
(991mm x 559mm x 1397mm) EST
GAS SPECIFICATIONS
■■NATURAL GAS ■■PR PANE GAS
120,000 BTU/hr. INPUT 120,000 BTU/hr. INPUT
#363 - 01/09
ASF-60G
GAS OPEN FRYER
FryFry
TechTech
O P T I O N S
■■Fry Pot Cover 5007596
■■Strainer/Skimmer CE-27400
STANDARD ACCESSORIES
■■Basket, Half-Size (2 INCLUDED AS STANDARD)BS-27963
Brush Set (ONE 3-BRUSH SET INCLUDED AS STANDARD)
■■ ANGLE BRUSH BH-28692
■■ SCRUB BRUSH BH-28693
■■ STRAIGHT BRUSH BH-28691
ELECTRICAL
V LTAGE PHASE CYCLE/HZ AMPS KW
120 (AGCY)1 60 1.2 1.5
230 1 50/60 1.0 2.3
N E M A 5-15P
15A-125V PLUG
C E E 7 / 7
220-230V PLUG