Alton Evolution Internal Shading User manual

10/16

2
To install the internal shading blinds to your Alton Evolution greenhouse you will need to
temporarily remove the ridge braces. With the braces removed you will be able to position the roller
blind parallel to the underside of the ridge (diagram 1). Fix this in place with round head screws.
Internal Shading Installation
Were a roller blind meets a gable end you will
need adjust the direction of the flange (diagram
2). Using an adjustable spanner clamp this onto
the flange with the fixing hole in and bend it
upwards. You will now be able to fix this inline
with the other blinds.
With all the blinds in place you can re-attach any
bracing you removed.
Diagram 1
Diagram 2
Diagram 3

3
Internal Shading Installation
Now fit the universal hooks to the
underside of the roof glazing bars (diagram
5). These fit neatly side by side if you have
multiple blinds (diagram 6). The hook that
is fixed to the gable end is in a slightly
different position due to the bigger section
(diagram 7). This means that the bottom of
the blind is at a slight angle , this will not
effect how the blind functions.
Diagram 4
Diagram 5
Diagram 6
Diagram 7

Alton Greenhouses, TGP Ltd, Blythe Park, Cresswell, Stoke-on-Trent, ST11 9RD
Telephone: [phone] www.Altongreenhouses.co.uk [email protected]