Altronix PD16WCB User manual

PD16W, PD16WCB
Power Distribution Modules
Overview:
These power distribution modules converts a single AC input into sixteen (16) individually fuse
or PTC protected outputs.
Power Distribution Module Configuration Reference Chart:
PD16W -- 16 3.5 amp 10 amp 12.5 amp
PD16WCB 16 -- 2.5 amp 10 amp 12.5 amp
*Total output is limited by the total output of UL Listed power supply employed.
Specifications:
Installation Instructions:
1. Mount sub-assembly power distribution module in desired location/enclosure.
2. Connect the desired UL Listed power supply output of a suitable rating to terminals marked [INPUT] (Fig. 1a, pg. 2).
3. Measure output voltage before connecting devices. This helps avoid potential damage.
All terminals with common suffix P 1P, 2P...” are same polarity.
5. Connect each device to terminal pairs 1 to 16, marked [1P-1N thru 16P - 16N] (Fig. 1, pg. 2).
For DC applications “N” terminals are negativeand “P” terminals are positive. Note: Observepolarity.
WARNING: Toreduce the risk of fire or electric shock, do not expose the unit to rain or
moisture. This installation should be made by qualified service personnel and should conform to
all local codes and in accordance with the National Electrical Code.
For continuous protection against fire hazard, replace fuses only with the same type and rating.
Altronix
Model Number
Fuse Protected
Outputs
PTC Protected
Outputs (Class 2
power limited).
Output Current
(max per output
do not exceed
total output)
Input:
• 24VAC or 28VAC up to 12.5 amp
or 12VDC or 24VDC up to 10 amp.
Fuse Ratings:
•Fuses are rated @ 3.5A/250V.
Visual Indicators:
• Power output LED indicator.
BoardDimensions (approximate):
6"H x 5.875"W x .95"D (PD16W, PD16WCB)
*Total output
12 or 24VDC
*Total output
24 or 28VAC

common
outputs
protected
outputs
P
N
NPS
XFMR Input
12345678
910 11 12 13 14 15 16
PN
3.5A 250V
For continuous protection against risk of fire
replace fuses with same type and rating.
Fig. 1
common
outputs
protected
outputs
P
N
NPS
XFMR Input
12345678
9 10 11 12 13 14 15 16
PN
3.5A 250V
For continuous protection against risk of fire
replace fuses with same type and rating.
Fig. 1a
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: [phone]
website: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
IIPD16W - Rev. 072505 B12H MEMBER
P
N
NPS
XFMR Input
common
outputs
protected
outputs
12345678
9 10 11 12 13 14 15 16
NP
PD16W PD16WCB
*If DC power supplyis used,connect
negativeto “N” and positive
to “P” terminals.