Altronix Trove THWD2 User manual

Overview:
THWD2 accommodates a variety of Honeywell ProWatch/WinPak boards for access systems of up to twelve (12) doors.
Specifications:
• 16 Gauge backplane.
Dimensions (H x W x D): 23.75” x 18.125” x 0.3125” (603.3mm x 460.3mm x 7.9mm).
Backplane Accommodates a Combination of the Following:
• Up to six (6) PRO32IC, PRO32R2, PRO32IN, PRO32OUT, PW6K1IC, PW6K1R2, PW6K1IN, PW6K1OUT modules.
• One (1) PRO22MX8 module.
Hardware:
Nylon Standoff | 5/16” Pan Head Screw | Lock Nut
THWD2_Rev. 122418
Access & Power Integration
THWD2
- Honeywell ProWatch/WinPak door backplane for Trove2 and Trove3
Installation Guide

- 2 - THWD2 - Honeywell ProWatch/WinPak Door Backplane
A
A
A
A
A
A
B
THWD2: Configuration of Honeywell ProWatch/WinPak Boards:
Honeywell ProWatch/WinPak Access Controllers:
1. Fasten standoffs (provided) into pem configuration (A) or (B) of backplane (Fig. 1, pg. 2).
2. Mount boards to standoffs utilizing 5/16” pan head screws (provided) (Fig. 1a, pg. 2).
3. Mount backplane to enclosure with hardware.
Honeywell ProWatch/WinPak Access Controller Position Chart for the Following Models:
Honeywell Board Pem Mounting
PRO32IC, PRO32R2, PRO32IN, PRO32OUT,
PW6K1IC, PW6K1R2, PW6K1IN, PW6K1OUT A
PRO22MX8 B Pem
Standoff
Honeywell
Access Controller
Backplane
Pan Head
Screw
Fig. 1a
Fig. 1

THWD2 - Honeywell ProWatch/WinPak Door Backplane - 3 -
Notes:

- 4 - THWD2 - Honeywell ProWatch/WinPak Door Backplane
THWD2 Backplane Dimensions (H x W x D):
23.75” x 18.125” x 0.3125” (603.3mm x 460.3mm x 7.9mm)
13.7”
(350mm)
13.7”
(350mm)
7.4”
(188mm)
8”
(203.2mm)
7.85”
(199.4mm)
7.5”
(190.5mm)
18.125”
(460.3mm)
10.82”
(274.8mm)
2.075”
(52.7mm)
23.75”
(603.3mm) 0.45”
(11.4mm)
8.7”
(221mm)
11.8”
(299.7mm)
8.7”
(221mm)
0.156”
( 4mm)
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | phone: [phone] | fax: [phone]
web site: www.altronix.com | e-mail: [email protected] | Made in U.S.A.
IITHWD2 A16S
MEMBER