Altronix ALTV615DC616UL Operating and maintenance instructions

Rev. 050404 More than just power.TM
ALTV615DCUL Series
CCTV Power Supplies
Installation Guide
Models Include:
ALTV615DC416UL ALTV615DC416ULCB
- 6-15VDC @ 4A - 6-15VDC @ 4A
- Sixteen (16) Fuse Protected Outputs. - Sixteen (16) PTC Protected Outputs.
ALTV615DC616UL ALTV615DC616ULCB
- 6-15VDC @ 6A - 6-15VDC @ 6A
- Sixteen (16) Fuse Protected Outputs. - Sixteen (16) PTC Protected Outputs.
For models with the factory installed 3-wire line cord
add suffix “3”, e.g. ALTV615DC616UL3

- 2 - ALTV615DCUL Series
Overview:
ALTV615DCUL Series DC CCTV Power Supplies provide 6 - 15VDC distributed via fuse or PTC protected
outputs for powering CCTV cameras, heaters, and other video accessories.
ALTV615DCUL Reference Chart:
Altronix
Model Number
Total Output Current (Power) Output Voltage Number of Outputs PTC Protected Outputs (auto-resettable) Class 2 Rated Power-Limited Fuse Protected Outputs Output Current (max per output) 115VAC 50/60Hz Input Current
ALTV615DC416UL 4A 6 - 15VDC 16 – P P 3.5A 0.9A
ALTV615DC416ULCB 4A 6 - 15VDC 16 P P – 2.5A 0.9A
ALTV615DC616UL 6A 6 - 15VDC 16 – – P3.5A 1.5A
ALTV615DC616ULCB 6A 6 - 15VDC 16 P P – 2.5A 1.5A
Specifications:
CAUTION: This installation should be made by qualified service personnel and
should conform to the National Electrical Code and all local codes.
Installation Instructions:
1. Mount unit in the desired location.
2. Connect AC power to the two black and two white flying leads of the transformer (Fig. 1, pg. 3).
Units with line cord installed skip Step 2.
Use 18 AWG or larger for all power connections. Connect green ground lead to earth ground (Fig. 1, pg. 3).
Keep power-limited wiring separate from non power-limited wiring.
Minimum 0.25” spacing must be provided. Use separate knockouts.
3. Adjust output voltage (unit is factory set at 12VDC): use the trimpot on the power supply board
prior to connecting CCTV devices (Fig. 1a, pg. 3).
4. Measure output voltage before connecting devices. This helps avoiding potential damage.
CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting
the output voltage.
5. Connect devices to the terminals marked [1P - 1N] through [16P - 16N] on PD16W/PD16WCB board,
carefully observing correct polarity (Fig. 1, pg. 3).
Terminals marked [1P - 16P] are positive (+) and terminals marked [1N - 16N] are negative (–).
6. Green LED will illuminate when unit is powered.
7. Upon completion of wiring secure enclosure door with screws (supplied).
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
Agency Listings:
• UL Listed for Commercial CCTV Equipment
(UL 2044).
CUL Listed - CSA Standard C22.2 No.1-98,
Audio, Video and Similar Equipment.
Input:
• Input 115VAC, 50/60 Hz.
Output:
• Sixteen (16) individual outputs.
• 6VDC to 15VDC field adjustable.
• Outputs are rated @ 3.5A (fused) or 2.5A (PTC).
• Filtered and electronically regulated outputs.
Features:
• AC input and DC output LED indicators.
• Power ON/OFF switch.
• Unit maintains camera synchronization.
• Ease of installation saves time and eliminates
costly labor.
Enclosure Dimensions (H x W x D approx.):
13.5” x 13” x 3.25”
(342.9mm x 330.2mm x 82.6mm).

ALTV615DCUL Series - 3 -
Terminal Identification:
Power Supply Board
Terminal Legend Function/Description
AC/AC Low voltage AC input.
+ DC – 6VDC -15VDC output.
PD16W/PD16WCB - Distribution Module
1P - 16P Positive DC outputs.
1N - 16N Negative DC outputs.
Door
CAUTION: De-energize unit prior to servicing. For continued protection against fire hazard
replace fuse with the same type and rating: 3.5A, 250V. Do not expose unit to rain or moisture.
3.5A 250V
For continuous protection against
risk of fire replace fuses with
same type and rating.
common
outputs
protected
outputs
P
N
NPS
XFMR Input
PD16W
12345678
9 10 11 12 13 14 15 16
NP
Wire Strap
(from
Enclosure
to Door)
non
power-
limited
XFMR XFMR
Black Lead
White Lead
115VAC input
50/60 Hz
Power Supply
Board
Trimpot
Used on PTC Models
(example: ALTV615DC416ULCB)
P
N
PTCs
NPS
XFMR Input
Power-Limited Class 2
PD16W
common
outputs
protected
outputs
12345678
9 10 11 12 13 14 15 16
PN
DC outputs
DC outputs
Green
Lead
(ground)
Power
Switch
Fig. 1a
Fig. 1

- 4 - ALTV615DCUL Series
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may
be of sufficient magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
CAUTION: To reduce the risk of electric shock do not open
enclosure. There are no user serviceable parts inside. Refer servicing
to qualified service personnel.
Enclosure Dimensions (H x W x D approximate):
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm)
1.40”
(36mm)
1.40”
(36mm)
4.85”
(123mm)
4.85”
(123mm)
1.40”
(36mm)
1.40”
(36mm)
5.10”
(130mm)
5.10”
(130mm)
13.0”
(330mm)
5.10”
(130mm)
6.5625”
(167mm)
1.20”
(31mm)
1.20”
(31mm) 1.20”
(31mm)
3.25”
(83mm)
3.25”
(83mm)
3.25”
(83mm)
3.25”
(83mm)
1.0”
(25mm)
1.0”
(
25mm
)
10.5”
(
267mm
)
1.0”
(
25mm
)
1.0”
(25mm)
0.75”
(19mm)
0.75”
(19mm)
0.9375”
(24mm)
0.9375”
(24mm)
11.0”
(279mm)
12.5”
(318mm)
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | phone: [phone] | fax: [phone]
website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty | Made in U.S.A.
IIALTV615DCULSeries B22R MEMBER