Altronix HubWay 8CD User manual

Altronix HubWay8CD Passive UTP Transceiver
Hub w/Integral Camera Power transmits UTP
video, RS422/RS485 data and power over a
single CAT-5 or higher structured cable. Unit
provides 8 camera channels in a space sav-
ing 1U EIA 19” rack mount chassis which may be rack, wall or
shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC
fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners.
In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppres-
sion. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory
module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the
HubWay8D. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of
voltage drop associated with long cable runs.
Input:
• 115VAC 50/60Hz, 1.5 amp.
Video:
• Eight (8) channels of video over twisted pair
up to a distance of 750 ft. per channel.
• Eight (8) 75 ohm video outputs.
Data:
•RS422/RS485 data inputs.
Power:
• Individuallyselectable 24VAC or 28VAC power
outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to
exceed a total of 5 amp (150VA) maximum current.
• PTC protected outputs are rated @ 1 amp
per channel.
• Surge suppression.
Visual Indicators:
•AC input power indicator.
•Eight (8) individual power LED indicators.
Features:
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.
Accessories:
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
• Video Balun/Combiners:
-HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
-HubWayDvi - for use with 12VDC
cameras without isolation.
Shipping Weight (approximate):
- HubWay8CD: 12.3 lbs.
- HubWay82CD: 13.0 lbs.
- HubWay83CD: 13.5 lbs.
HubWay8CD
Eight (8) Channel Passive UTP Transceiver
Hub with Integral Camera Power
HubWay82CD
Eight (8) Channel Passive UTP Transceiver with
eight (8) HubWayAv Video Balun/Combiners
HubWay83CD
Eight (8) Channel PassiveUTP Transceiver with
eight (8) HubWayDv Video Balun/Combiners
HubWay ® 8CD Passive UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubWay8CD - K25H
Overview
Specifications
Models
Agency Approvals
UL Listed for Commercial CCTV Equipment
(UL 2044).
CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.

Altronix Corp. -140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
1U EIA 19” Rack Mount Chassis Mechanical Drawing & Dimensions:
1.625”H x 19.125”W x 8.5”D
TOP & BOTTOM
FRONT
1.625"
8.5"
.75"
19.125"
17.625"
(ON)
AC POWER
876 5432 1
1234CH 1-4 CH 5-8
24VAC
OFF
28VAC
5678
DATA
1-8
REAR
HubWayAv
•Compatible with HubWay®,
HubWay®LD and HubSat®UTP
Transceiver Hubs for use with
24VAC cameras.
HubWayDv
•Compatible with HubWay®,
HubWay®LD and HubSat®UTP
Transceiver Hubs for use with
12VDC cameras.
HubWayDvi
•Compatible with HubWay®,
HubWay®LD and HubSat®UTP
Transceiver Hubs for use with
12VDC cameras without isolation.
Video Balun/Combiners