Alu-Cab SH-BKT-FR User manual

Shower Cube
to
Front Runner Roof Rack
(SH-BKT-FR)

2
1. Shower Cubicle Fitment – Tools, Fasteners & Materials
The tables below show the equipment, i.e. tools and fasteners required to start the
shower cubicle fitment onto a Front Runner Roof Rack.
1.1. Tools & Items Required:
1.2 Fasteners supplied: (Included with Shower Cubicle)
ITEM
QTY
M8x70 Hex Head Bolt
4
M8 FLAT WASHER
8
M8 NYLOC NUT
8
M8 PLASTIC NUT CAP
4
1.3 Hardware Required: (Included with Shower Cubical)
ITEM
DESCRIPTION
QTY
SHOWER CUBICLE
SHOWER CUBICLE ASSEMBLY
1
SHOWER CUBICLE BAG
BLACK SHOWER CUBICLE BAG
1
SHOWER CURTAIN
GREY SHOWER CURTAIN
1
AWNING TO FRONTRUNNER FRONT MOUNT
492-FRUN-FNT-MNT-BRKT-01
2
TOOLS
Ratchet
13mm Socket
13mm Ring Flat Spanner
Drill
8.5mm drill bit

3
Figure 1.SHOWER CUBICLE
Fig 2.492-FRUN-FNT-MNT-BRKT-01
x2

4
2. Mounting the brackets to Load bar
Remove the two M8 Nyloc nuts from the shower cube and fit the bracket
(492-FRUN-FNT-MNT-BRKT-01) to the shower cube.
Figure .4

5
3. Fitting to Front Runner Rack:
Position the Shower cube with brackets fitted, onto the Roof Rack to whichever position
along the sides of the vehicle.

6
Use the slots on the brackets as a jig to drill 8.5mm holes to fit the M8x70mm bolts.
M8x70mm hex head
M8 washer
M8 nyloc nut and
nutcap