Alu-Cab SH-BKT-LB User manual

Shower Cube
to
Load bars
(SH-BKT-LB)

2
1. Shower Cubicle Fitment – Tools, Fasteners & Materials
The tables below show the equipment, i.e. tools and fasteners required to start the
shower cubicle fitment onto a Icarus Tent.
1.1. Tools & Items Required:
1.2 Fasteners supplied: (Included with Shower Cubicle)
ITEM
QTY
HEX HEAD BOLT M8X20
12
M8 FLAT WASHER
14
M8 NYLOC NUT
12
M8 PLASTIC NUT CAP
14
1.3 Hardware Required: (Included with Shower Cubical)
ITEM
DESCRIPTION
QTY
SHOWER CUBICLE
SHOWER CUBICLE ASSEMBLY
1
SHOWER CUBICLE BAG
BLACK SHOWER CUBICLE BAG
1
SHOWER CURTAIN
GREY SHOWER CURTAIN
1
AWNING MOUNTING BRACKET
AMB-000-001 Rev b
2
AWNING BRACKET BACK PLATE
AMB-000-002
2
TOOLS
Ratchet
13mm Socket
13mm Ring Flat Spanner

3
x2
Figure 1.SHOWER CUBICLE
Fig 2. AMB-000-001 Rev b
Fig 3. AMB-000-002
x2

4
2. Mounting the brackets to Load bar
Figure .4
fit all bolts, washers and nuts to the brackets before fitting
them to the load bar, as it has to slide into the slots as seen in
figures 4,5 and 6.
Figure5
Figure 7.
Sectional view
mounting bracket
sliding onto load
bar.
Figure .6

5
3. Mounting the shower cubicle
Place shower cubicle assembly with the bag on mounting brackets and secure shower
cubicle to the mounting brackets using the same nuts that where removed in fig 8. t
Place M8 Plastic Nut Caps on all M8 Nyloc Nuts and bolt heads on the outside to
finish of the mounting bracket fitment.
Fig 8.
Fig 9.