6
2. Open the Smart Life App
Create and account or login with an existing account to begin timer setup.
3. Enter configuration Mode
Long press the ON/OFF button for 6s until the green light flashes quickly, and then enter
the pairing mode.
4. Add a Device
Tap “Add device” or “+” to add the smart device in app. Select “Industry & Agriculture” >
“Water valve controller (BLE)”. Waiting for connecting to be 100%. Edit the name of your
water timer completed.
Initial Water Timer Setup
1. Insert Two AA Batteries
Batteries are not included and you will need two alkaline AA batteries to power your
timer. Remove the battery tray and install the batteries according to the drawings
located in the tray. Firmly reinstall the battery tray back into the timer.
2. Install the Timer
Connect the timer to an outdoor hose faucet. Your time is now ready to be used with
any product that can be attached to a standard hose faucet.
Do not place the timer in an underground valve box or anywhere your Bluetooth
signal will be obstructed.
3. Turn on Your Water
The water must remain on for the timer to work properly.
Additional Water Timer Features
Manual Watering
You timer has the ability allow you to manually water without disturbing the
programmed schedule. Manual is used to test equipment, run and extra watering cycle
in an area, or to use the hose faucet without removing the timer. Pres the ON/OFF
button to activate manual watering. Using the app you can set how long you want the
preset manual cycle to run for.
Stop Watering
You can stop the flow of water at any time whether it is during manual watering, or
during programmed time. Press the ON/OFF button once to stop watering.