Amantii WM-BI-2428-VLR-BG User manual

INSTALLATION ANDOPERATION INSTRUCTIONS
WM-BI-2428-VLR-BG
SAFETY INFORMATION
WARNING
If theinformationintheseinstructionsare
not followed exactly,afireorexplosion
mayresult causingpropertydamage,
personalinjuryorlossoflife.
Do not storeoruse gasolineorotherflammablevapors
and liquidsint hevicinity ofthisorany otherappliance.
INSTALLER: LEAVE THIS MANUAL WITHTHEAPPLIANCE.
CONSUM ER: RETAINTHIS MANUAL FOR FUTURE REFERENCE.

2
TABLE OF CONTENTS
Pleasereadandcarefullyfollowalloftheinstructionfoundinthis manual.Pleasepayspecial
attentiontothesafetyinstructionsprovided int hismanual.Theinstructionsincludedhere will assure
thatyouhavemanyyearsofdependableand enjoyableservicefromyourAmantii product.
IMPORTANTINSTRUCTIONS.......................................................................................................................3
UNPACKINGAND TESTINGAPPLIANCE....................................................................................................4
GROUNDINGAPPLIANCE............................................................................................................................4
LOCATINGTHEFIREPLACE........................................................................................................................4
CLEARANCES WHTNBUILT-IN....................................................................................................................5
INSTALLATION-WALLMOUNT.....................................................................................................................7
WM-BI-2428-VLR-BG.....................................................................................................................................8
INSTALLATIONOVERVIEW MASONRYFIREPLACES............................................................................9
INSTALLATIONOVERVIEW ZERO-CLEARANCE(METAL)FIREPLACES............................................10
HARD-WIREINSTALLATION......................................................................................................................11
MEDIAOPTIONS.........................................................................................................................................12
FIREGLASS MEDIAINSTALLATION..........................................................................................................12
CHANGETHEFRONTFLATGLASS TOCURVE GLASS.........................................................................12
OPERATION.................................................................................................................................................13
MANUALOPERATION.................................................................................................................................13
REMOTECONTROLOPERATION..............................................................................................................14
INSTALLING WALLTHERMOSTAT.............................................................................................................15
REPLACEMENTPARTS..............................................................................................................................16
EXPLODEDVIEW........................................................................................................................................17
TROUBLESHOOTING................................................................................................................................18
SERVICEHISTORY.....................................................................................................................................19
WARRANTY.................................................................................................................................................20

3
IM PORTANT INSTRUCTIONS
Read allinstructionsbeforeinstalling orusing thisheater.
2.Keep combustiblematerials,suchasfurniture,pillows,bedding,papers,clothesand
curtainsatleast3feetfromthe frontofthe heater;keep themawayfromsidesand rear
aswell.
3.Always unplugheaterwhen it’snotinuse.
4.Donotoperatethe fireplaceifit hasadamagedcordorplug, afterit hasmalfunctioned, or
if theunit hasbeendropped ordamaged inanyway.
5.Donot usethe heateroutdoors.
6.Thisheaterisnotintended foruseinbathrooms,laundryareasand similarindoor
locations.Neverplacethe heaterwhereitmayfall intoabathtuborotherwater
containers.
7.Donotrun the cordundercarpeting.Donotcoverthe cordwiththrowrugs,runnersor
anything else.Arrangethe cordawayfromtrafficareaswhereitcouldnotbetrippedover.
8.Todisconnecttheheater,turnthe controlsto"OFF"beforeremoving theplug fromthe
outlet.
9.Donotinsertorallowforeignobjectstoenteranyventilationorexhaustopening,asthis
maycausean electricshock, fireordamage tothe heater.
10.Toprevent apossiblefire, do not block airintakesinanymanner.
11.Aheaterhashotand arcing orsparkingpartsinside.Donotuseitinareaswhere
gasoline, paint orflammableliquidsareused orstored.
12.Usethisheateronlyasdescribed inthismanual. Anyotherusenotrecommended bythe
manufacturermaycausefire, electricshock orinjurytopersons.
13.Always useproperlygroundedfused and polarizedoutlets.
14.Always usegroundfaultprotection whereitisrequiredbyelectricalcodes.
15.Always disconnectthepowerbeforeperforming anycleaning,maintenanceorrelocation
of the heater.
16.Toprevent apossiblefire, do not burnwood orothermaterialsinthisheater.
17.Topreventelectricshock orfire,always useacertified electrician,shouldnewcircuitsor
outletsbe required.
When transporting orstoring the heater,keepitinadryplace,free fromexcessive
vibration.
1.
18.

4
UNPACKINGANDTESTINGAPPLIANCE
Carefullyremovetheappliancefromthebox. Removethepackingscrewsfrombothsidesofthe
fireplace.
Priortoinstallingtheappliance,testtomakesuret heapplianceoperatesproperlybypluggingthe
powersupplycordintoaconvenientlylocated 120 Volt grounded outlet.
Testallaspectsofitsoperation(manualswitches, remoteand heater)tomakesure all components
operatecorrectly.
GROUNDINGAPPLIANCE
This applianceis foruseon 120Volts.Thecordhasaplugasshownin(A). Anadapterasshownin(C)
is availableforconnectingthree-bladegroundingtypeplugstotwo-slotreceptacles.Thegreen
groundinglugextendingfromtheadapt ermustbeconnectedtoapermanentground suchasa
properlygroundedoutletbox. Theadaptershouldnotbeusedifathree-slotgroundedreceptacleis
available.
To disconnectappliance,turn controls to off,
then removeplugfromoutlet.
LOCATINGTHEFIREPLACE
Planwhere tolocateandframethefireplace.This will savetimeandmoneylaterwhenyouinstall
thefireplace.Beforeinstallationconsidert hefollowing:
1. Where thefireplaceis locatedmust allowforwallandceilingclearances
Location of
Packin
g
screw

5
2. Consideralocationwhere thefireplacescreenwill notbeexposedtodirectsunlight from
windowsordoors.
3. A15 ampere,120 Volt,60 Hz branchcircuit with properground mustbeavailableatthelocation.
Preferablyadedicatedbranchcircuitshouldbeprovidedtoavoidcircuitbreakerstotripoffuses
toblow.
CLEARANCES WHTN BUILT-IN
Thefireplacemaybeplacedwithinaframedenclosuret hatis level, dryand capableofsupporting
theweightoftheapplianceandfront glass.Itmaybeplaceddirectlyonwoodoranon-combustible
surface(notonlinoleumorcarpet). Theminimumclearancefromthetopoftheappliancetoa
mantel(combustibleornon-combustible)is10”(254mm). Thesidesandbackmustmaintain
1”(25.4mm)clearancetoanymaterial.Thetopmustmaintaina3/ 8 ”(10mm)clearancetoany
material.
Wall
MINIMUN3/8" (10mm)CLEARANCETOTOP
OFAPPLIANCE(combustibleornon-combustible)
MINIMUN1"(25.4mm)CLEARANCETO
SIDESANDBACKOFAPPLIANCE
(combustibleornon-combustible)
MANTEL(maximun12" (305mm)deep
FRONTGLASS
FLOOR
Min10" (254mm)

6
Pleasesee thefollowingfigures. Itshowsthe dimension of fireplacewhen itinstall indifferent
way.
a. Fireplacewithflatglass insert tothe wall.
b. Fireplacewithcurveglass insert tothe wall.
c. Fireplacewithcurveglass inacornerd.Fireplacewithflat glass inacorner.
1"
43
4"61
4"
18"
18"
19
1
2"
191
2"

7
INSTALLATION-WALL MOUNT
1. Selectalocationthatis notproneto
moistureandis locatedatleast0.91mor3
feetawayfromcombustiblematerialssuch
ascurtainsordrapes, furniture,bedding,
paper,etc.
2. ReferringtoFig.1rightselectasuitable
positioninwhichtomounttheheater
horizontally useaspiritleveltoachieve
this.
3. Checkthewall toensurethere is nowiring,
pipewiresetcintheareatobedrilled.Drill
8ormore holes(8mmdiameter&40mm
depth)usingasuitablesizedrill andputthe
wall plugs into theholes.
4. Takeoutt hehangerfromthefireplaceby
unscrewthescrew.ReferringtoFig.2in
right.
5. ReferringtoFig.3 fixthehangertothe
wall.
Warning!Alwaysensurethefireplaceisat
least 610mm belowtheceiling!
Besurethattheboltshavebeenfixed
firmlyenoughtow ithstand theweight！
Fig. 1
Fig. 2
Fig.3

8
WM-BI-2428-VLR-BG
Description Built-inorWall mount Appliance
Voltage 120V AC60Hz
Watts 1500WM ax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 24”or61 cm
ApplianceHeight 28”or71.1 cm
ApplianceDepth 9 1/ 8”or23.2 cm
Gross Weight 57.2 lbsor26kg
PlugLocation Left side
Cord Length 707/ 8 ”or180 cm
RoughWallOpening
Size
20”×26“or
50.8 cm×66 cm
BTU 4800
This appliancehasbeentestedin
accordancewiththeULStandard2021
forfixedandlocationdedicated
electricroomappliancesintheUnited
Statesand Canada.Ifyouneed
assistanceduringinstallation,please
contactyourlocal dealer.
NOTE:Thisappliancemustbe
electricallywiredandgroundedin
accordancewithlocalcodes.Inthe
absenceoflocalcodes,usethe
currentCSAC22.1CanadianElectrical
Codein CanadaortheANSI/ NFPA70
NationalElectricalCodein theUnited
States.
24"[610mm]
28"[711mm]
91
8"[231.3mm]
1"[25.4mm]
243
4"[628.4mm]
177
8"[452.6mm]
63
4"[170mm] 145
8"[371mm]
161
8"[410mm]
81
8"[205.5mm]

9
2” (50mm) Minimum











HINT:
Paint the interior of the
fireplace with latex paint to
prevent fireplace odors
from entering the home.
Silicone































































































































































































































Leveling Bolts
HINT:
Close and seal the damper
to prevent air infiltration.
Cover plate is required if chimney
does not have suitable rain cap.
A Code-Conforming (jacketed, grounded) receptacle
may be placed within the fireplace. Do not place it above
the fireplace insert.
The surround glass extends 1"
below the base of the insert.
Attach the "This fireplace has been altered..." plate
to the fireplace (use two screws or other suitable
method). You may wish to place it in a location
where it will be covered by the surround glass.
on the insert to secure the
secure the bracket to the
insert from tipping. Secure
brackets to both sides.
INSTALLATIONOVERVIEW MASONRYFIREPLACES

10
INSTALLATIONOVERVIEW ZERO-CLEARANCE(METAL)FIREPLACES






























2” (50mm)
Minimum















































































































































The log shelf,
screen, and doors
(if present) must
be removed.



















































































HINT:
Paint the interior of the
fireplace with latex paint to
prevent fireplace odors
from entering the home.
HINT:
Close and seal the damper
to prevent air infiltration.
Cover plate is required if chimney
does not have suitable rain cap.


If the firebox steps down greater than
1", place shims (plywood, tile, etc.)
under the leveling bolts to provide
adequate leveling.
Silicone
The surround glass extends 1"
below the base of the insert.













A Code-Conforming (jacketed, grounded)
receptacle may be placed within the fireplace. Do
not place it above the fireplace insert.
Leveling Bolts
Attach the "This fireplace has been
altered..." plate to the fireplace (use
two screws or other suitable
method). You may wish to place it in
a location where it will be covered by
the surround glass.
Use one of the rear screws
on the insert to secure the
included tie-down bracket to
the fireplace. Once in place,
secure the bracket to the
fireplace floor to prevent the
insert from tipping. Secure
brackets to both sides.

11
HARD-WIRE INSTALLATION
Turnofftheappliancecompletelyand let coolbeforeservicing.Onlyaqualifiedserviceperson
should serviceandrepairthiselectricappliance.
If itis necessaryt ohardwirethisappliance,aqualifiedelectricianmustremovet hecordconnection,
and wiretheappliancedirectlyto thehouseholdwiring.
This appliancemustbeelectricallyconnectedandgroundedinaccordancewith localcodes,ifhard
wired.Intheabsenceoflocal codes, usethecurrentCSA C22.1CANADIANELECTRICAL CODEin
Canadaort hecurrentANSI/ NFPA70 NATIONAL ELECTRICAL CODEintheUnited States.
1. Removethecoverplatefromtheleftsideoftheappliancebyremovingthetwoscrews, as
shownbelow.Unscrewand removepowercord.
2. Attachthewiringtothejunctionblock.Pleasemakesurethelivewiregoesintothe “L”,the
neutral wireinto “N”and thegroundwireint o “G”.
3. Puttheplatebackandscrew back.

12
MEDIAOPTIONS
This fireplaceshippedwith 11pieceslogset,
real coal andsable.
coal11piece log setsable
FIRE GLASS M EDIAINSTALLATION
Unplugtheunitfromwall and makesure
controls areswitchedoff.Pleaserefertopage4
theunpackingandtestingt heappliance.
Pourthefireglass media intothetray.Feelfree
touseanycombinationoffire glass mediathat
youfind mostappealing.Put backthefront
glass afteryoufinish install thefire glass.
CHANGETHEFRONTFLATGLASS TO
CURVE GLASS
1.Takeoffthefront flat glass.
2.Unscrewthescrewsandtakeoffthetray
glass holderbracket and t hetrayglass.
3.Usethenewtrayglassholderbracketforthe
curveglass.
4.Changethenewtrayglass andscrewthe
bracket.
Youcandisplaytheglassmedia andthe6piece
logset asin FIREGLASS MEDIA INSTALLATION.
Hook thenewcurveglass andenjoy
yournewstylefireplace.

13
OPERATION
Thefireplacecanbeoperatedeitherbytheswitcheslocatedontheleftfront ofthefireplaceunitor
bysupplied remotecontrol.
MANUAL OPERATION
1. ThemainpowerON/ OFFswitchinpositionO,thefireplaceis OFF.
2. WhenmainpowerON/OFF switchis at position I,thefireplaceis readyto use.
3. Press t he buttonrepeatedlytosettheheatertodesiredheatsetting.Theheaterindicator
LED will glowwhichshowst hecurrent heatersettings.
a) RED 1500WHEAT OUTPUT
b) BLUE750WHEAT OUTPUT
c) PURPLEAUTOM ODE
AUTO MODE
Underthis modetheheaterwill automaticallyturnONathighheatsetting1500Wheatoutputwhen
theroomtemperature dropsbelow22 (72 ℉). Whentheroomtemperatureis between
22-25 (72-77 ℉)theheateroutput will switchtolowheatsetting750W.Whentheroom
temperature goesabove25 (77℉)theheaterwill beturnedoff andthecyclewill continue.The
LED indicatorwill bePURPLEincolourunderthis mode.
4. Flameeffect:Press thebuttonmarked toadjustt heflamebrightness.Theflamebrightness
will cyclethrough Low-Medium-High-OFF.
5. Moodlight effect:Press thebuttonmarked to changethemoodlight colour.
NOTE: IfoperatedattheLowheatsetting,thefireplacewill notprovideasmuchheatoutputasin
theHighheatsetting,howeverthelowsettingwill notrequireasmuchelectrical powertooperate.
Toavoidoverloadingacircuit,donotplugthefireplaceintoacircuitthatalreadyhasother
appliancesworking.When thefireplaceis not in useswitchoff andunplug.
SAFETYCUT-OFF
lThis applianceis fitt edwith asafetycut-offwhichwill operateifthefireplaceoverheats(eg.Due
toblockedairvent s). Forsafetyreasons, thefireplacewill NOT automaticallyreset.
lToresettheappliance,disconnecttheappliancefromthemainsupplyforatleast10 minutes.
Reconnectthesupplyt othemainand switchontheappliance.

14
REMOTE CONTROL OPERATION
Forremotetofunctionmakesure theheaterispluggedinandmainpowerswitchlocatedonthe
bottomleft handsideis at position I.
Whenoperatingt heremotemakesureyoupointt heremotetothecentreofthefireplaceand make
sure eachtimeyoupressthebuttonthebuzzerinsidetheunitwill beeponce.Ittakessometimefor
thereceivertorespondtothetransmitter.DonotPRESS thebuttonsmoret hanoncewithintwo
secondsforcorrectoperation.
Poweron button:Thepower-onbuttonattopleftcorneroftheremoteis themainON/ OFF
powerbutton.This will turnoff all thefunctionsand thefireplacewill bein standbymode.
DISPLAYON/ OFFbutton:SwitchingthefireplaceflameandtraylightON/ OFF.Ithasfunctionsof
settingmemory.
DISPLAYBLUEbutton:Adjustthebluecolorbrightness offlameandtray.
DISPLAYYELLOW button:Adjusttheyellowcolorbrightness offlameand tray.
DISPLAYORANGEbutton:Adjusttheorangecolorbrightness offlameand tray.
MOODLIGHTON/ OFFbutton:Switchingthetop light ON/ OFF.
ADJUST button:Switchingthecolorofthetoplight.
FLASHbutton:Switchesthemood light into flashmode,this cyclesthrough all top light colors.
HEATERON/ OFFbutton:SwitchingtheheaterON/OFF.Ithasfunctionsofsettingmemory.
HIGHTbutton:Pressthehighbuttontoswitchtheheatertohighheat setting1500W.
LOW button:Press thelowbutt ontoswitchtheheaterto low heatsetting750W.
TEMP.button:PresstheTEMP.buttontoswitchtheheatertoAUTOmode.Underthismodethe
heaterwill operatein similar wayasexplainedaboveforthemanual operation.

15
INSTALLINGWALL THERMOSTAT
WALL THERM OSTATW IRING DIAGRAM S
NOTE:THEWALL THERM OSTATWILL WOKINGWHENTHEHEATERONTEMP.SETTING.PLEASE
REEFERTOTHEMANUALCONTROLAND THEREMOTECONTROL.
Wirethewallthermostat prior toinstallingthefireplace.
WALL THERM OSTATW IRING(24VAC)
Install Wall Thermostat per instructionsprovided withkitandperthefollowinginformation:
1. Turn off circuitbreaker.
2. Removecoverplatelocatedontheleftup sideofappliance.
3. Pull thewire outandcuttheinsidethermostat.Connectthewirestothewall thermostatas
shownbelow.Followinstructionsprovidedwit h wall switchkit.

16
REPLACEMENTPARTS
NO PARTNUM BER DESCRIPTION QTY.
1 TOPPANEL 1
2 BACK TOPPANEL 1
3 601089C CIRCUITBOARD 1
4 602067D BLOWERAND HEATERASSEM BLY 1
5 601097 FIREPLACE BOX 1
6 TOPLEDSTRIP 1
7 10104010 TOPLEDBRACKET 1
6 601036 CONTROL PANEL 1
7 301506 REMOTE RECEIVER 1
8 10103007 POWERCORD 1
9 10104002 SWITCH 1
10 601032B CONTROL BOARD 1
11 3056505 FLICKERASSEM BLYBACK 1
12 601137B FLAMELEDSTRIP 1
13 601137B TRAYLEDSTRIP 1
14 3056506 FLICKERASSEM BLYTRAY 1
15 FLAMEEFFECTGLASS(CLEAR GLASS WITH BLACKPLASTIC) 1
16 10702150 BOTTOM GLASS 1
17 10103007 LEFT BRACKET 2
18 FRONTFLATGLASS 1
19 10105063 REMOTE 1

17
EXPLODEDVIEW

18
TROUBLESHOOTING
PROBLEMPOSSIBLECAUSE SOLUTION
FlameLED’sareburntout InspecttheLED’sand replacethemif
necessary.
Dim orno flame
Backblackcloth is fallingoff
and rolltheflicker
Changeanewflickerand backblack
cloth.
Emberbedis not
glowingordimming
EmberLED’sare burnt out InspecttheemberbedLED’sand
replacethemifnecessary.
Appliancehasoverheatedand
safetydevicehascausedthe
thermal switchtodisconnect
Turnoffthemainswitch,allow
appliancetocoolfor10minut es, then
turn iton.
Housecircuitbreakerhas
tripped
Reset housecircuitbreaker.
Applianceturnsoffand
will not turnon
Appliance’sfusehasblown Replacethefuse.
Applianceis notpluggedintoan
electrical outlet
Checkplugandplugin.
Appliancehasoverheatedand
safetydevicehascausedthe
thermal switchtodisconnect
Turnoffthemainswitch,allow
appliancetocoolfor10minut es, then
turn iton.
Appliancewill notcome
onwhenswitchis
flipped to ON
Circuitboardis burntout Inspectt hecircuitboardandreplace
it ifnecessary.
No warmaircomingout
of appliance
Heateris burnt out Inspecttheburnerand heater
assemblyandreplaceitif necessary.
Flamesputters Flamemotoris defective. Call aqualifiedservicetechnicianand
replaceflamemotor.
RemoteControldoes
not work.
Lowbatteries.
Unitswitch in “O”position.
ReplaceAAA batteriesinremote
control.
Turn theswitchin “I”position.
Flameis fixed. Wiringmaybelooseorthe
flamemotormaybedefective.

19
SERVICE HISTORY
This heatermustbeserviced annuallydependingonusage.
DateDealer
Name
Servicetechnician
Name
ServicePerformed Special Concerns
NOTES:

20