Amantii Tru-View Series User manual

Fi Fi l
Fi
x your
Fi
rep
l
ace

Contents
Contents
•
How to replace LED light
How
to
replace
LED
light
•How to replace flicker motor
Ht l thhti l t
•
H
ow
t
o rep
l
ace
th
e
h
ea
ti
ng e
l
emen
t
•How to replace the PCB board

Replace LED light
Item No.:FS-26-922
Ste
p
1
p
Hold tightly and push upwards, then you
can remove the front glass panel

Step 2
Unscrew two screws on the top of
each side (red dots) to remove inner
Left Right
each
side
(red
dots)
to
remove
inner
side panels and ember bed glass
panel

Remove screws → remove side panels → remove ember bed glass panel
Remove
screws
→
remove
side
panels
→
remove
ember
bed
glass
panel

Step 3
Now, you can replace ember bed LED light
Ember bed LED light locates here Unplug the red circled socket and
replace The old LED light with a new
one
Change flame light, see step 4

Step 4
Unscrew 4 screws on both sides (circled in red) to remove the
plastic board

Now you can replace the flame light.

Replace flicker motor
Replace
flicker
motor
Please follow
Step1
and
Step2
in replace
Please
follow
Step1
and
Step2
in
replace
LED light, then you arrived here

Replace ember bed flicker motor
Step 1
Unscrew the screw to separate
the motor and the flicker rod