Amantii BI-30-XTRASLIM User manual

SAFETY INFORMATION
WARNING
If theinformationintheseinstructionsare
not followed exactly,afireorexplosion
mayresult causingpropertydamage,
personalinjuryorlossoflife.
Do not storeoruse gasolineorotherflammablevapors
and liquidsinthevicinity ofthisorany otherappliance.
INSTALLER:LEAVETHIS MANUALWITH THE APPLIANCE.
CONSUMER:RETAINTHISMANUALFOR FUTURE REFERENCE.
INSTALLATIONANDOPERATIONINSTRUCTIONS FOR
BI-40-XTRASLIM
BI-50-XTRASLIM
BI-60-XTRASLIM
BI-30-XTRASLIM

2
TABLE OF CONTENTS
Pleasereadandcarefullyfollowalloftheinstructionfoundinthis manual.Pleasepayspecial
attentiontothesafetyinstructionsprovided inthismanual.Theinstructionsincludedhere will assure
thatyouhavemanyyearsofdependableand enjoyableservicefromyourAmantii product.
IMPORTANTINSTRUCTIONS................................................................................................................................... 3
UNPACKING ANDTESTINGAPPLIANCE.............................................................................................................. 4
GROUNDINGAPPLIANCE........................................................................................................................................ 4
LOCATINGTHEFIREPLACE.................................................................................................................................... 4
BI-40-XTRASLIM ....................................................................................................................................................... 6
BI-50-XTRASLIM ....................................................................................................................................................... 7
BI-60-XTRASLIM ....................................................................................................................................................... 8
SAFETYDRILLSCREWAREA..................................................................................................................................
OUTDOOR INSTALLATIONS .................................................................................................................................
9
11
MEDIAOPTIONS.......................................................................................................................................................21
OPERATION................................................................................................................................................................22
INSTALLING WALLTHERMOSTAT........................................................................................................................24
REPLACEMENTPARTS............................................................................................................................................25
WIRING DIAGRAM...................................................................................................................................................27
TROUBLESHOOTING..............................................................................................................................................28
SERVICE HISTORY....................................................................................................................................................29
WARRANTY...............................................................................................................................................................30
INSTALLATION.........................................................................................................................................................12
INSTALLATION BUILT-IN......................................................................................................................................12
INSTALLATION WALL-MOUNT............................................................................................................................16
EXPLODEDVIEW......................................................................................................................................................26
HARD-WIRE INSTALLATION....................................................................................................................................9
FOR BATHROOM USE..............................................................................................................................................10
BI-30-XTRASLIM ....................................................................................................................................................... 5

3
IMPORTANT INSTRUCTIONS
Read all instructionsbeforeinstallingorusingthisheater.
2. Keepcombustiblematerials, suchas furniture,pillows, bedding, papers, clothesandcurtainsat
least 3feetfromthefront oftheheater;keepthemawayfromsidesandrear as well.
3. Alwaysunplugheaterwhenit snot in use.
4. Donotoperatethefireplaceifithasadamagedcordorplug,afterit hasmalfunctioned,orifthe
unithasbeendroppedordamaged in anyway.
5. Neverplacetheheaterwhereit mayfall into abathtuborotherwatercontainers.
6. Donotrun thecordundercarpeting.Donotcoverthecordwiththrowrugs, runnersoranything
else.Arrangethecordawayfromtrafficareas whereit couldnotbetripped over.
7. To disconnecttheheater,turnthecontrolsto"OFF" beforeremovingtheplugfromtheoutlet.
8. Donotinsertorallowforeignobjectstoenteranyventilationorexhaustopening,as thismay
causeanelectricshock,fireordamagetotheheater.
9. To prevent apossiblefire,donotblockair intakesin anymanner.
10. Aheaterhashotand arcingorsparkingpartsinside.Donotuseitinareaswheregasoline,paint
orflammableliquidsareusedorstored.
11. Usethisheateronlyas describedinthismanual.Anyotherusenot recommendedbythe
manufacturermaycausefire,electricshockorinjurytopersons.
12. Avoidtheuseofanextensioncordbecausetheextension cordmayoverheat andcauseafire.
13. Alwaysuseproperlygroundedfused andpolarized outlets.
14. Alwaysusegroundfault protection whereitis requiredbyelectrical codes.
15. Alwaysdisconnectthepowerbeforeperforminganycleaning,maintenanceorrelocationofthe
heater.
16. To prevent apossiblefire,donotburn wood orothermaterials inthis heater.
17. Topreventelectricshockorfire,alwaysuseacertifiedelectrician,shouldnewcircuitsor
outletsberequired.
Whentransportingorstoringtheheater,keepit in adryplace,freefromexcessivevibration.
1.
18.

4
UNPACKINGANDTESTINGAPPLIANCE
Carefullyremovetheappliancefromthebox. Priortoinstallingtheappliance,testtomakesurethe
applianceoperatesproperlybypluggingthepowersupplycordintoaconvenientlylocated120Volt
groundedoutlet.
GROUNDINGAPPLIANCE
This applianceis foruseon 120Volts.Thecordhasaplugasshownin(A). Anadapterasshownin(C)
is availableforconnectingthree-bladegroundingtypeplugstotwo-slotreceptacles.Thegreen
groundinglugextendingfromtheadaptermustbeconnectedtoapermanentground suchasa
properlygroundedoutletbox. Theadaptershouldnotbeusedifathree-slotgroundedreceptacleis
available.
To disconnectappliance,turn controls to off,then removeplugfromoutlet.
LOCATINGTHEFIREPLACE
Planwhere tolocateandframethefireplace.This will savetimeandmoneylaterwhenyouinstall
thefireplace.Beforeinstallationconsiderthefollowing:
1. Where thefireplaceis locatedmust allowforwallandceilingclearances(see INSTALLATION)
2. Consideralocationwhere thefireplacescreenwill notbeexposedtodirectsunlight from
windowsordoors.
3. A15 ampere,120 Volt,60 Hz branchcircuit with properground mustbeavailableatthelocation.
Preferablyadedicatedbranchcircuitshouldbeprovidedtoavoidcircuitbreakerstotripoffuses
toblow.

BI-30-XTRASLIM
Description BI-30-XTRASLIM
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 29 1/8”or74.1cm
ApplianceHeight 19 7/8”or50.4cm
ApplianceDepth 4 or 10.25cm
Gross Weight 50.7lbsor23kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 29" X 20 3/8" or
73.66 cm X 52 cm
BTU 4800
This appliancehasbeentestedin
accordancewiththeULStandard2021
forfixedandlocationdedicated
electricroomappliancesintheUnited
Statesand Canada.Ifyouneed
assistanceduringinstallation,please
contactyourlocal dealer.
NOTE:Thisappliancemustbe
electricallywiredandgroundedin
accordancewithlocalcodes.Inthe
absenceoflocalcodes,usethe
currentCSAC22.1CanadianElectrical
Codein CanadaortheANSI/NFPA70
NationalElectricalCodein theUnited
States
”
5

6
BI-40-XTRASLIM
Description BI-40-XTRASLIM
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 39 1/8”or99.5cm
ApplianceHeight 19 7/8”or50.4cm
ApplianceDepth 4 or 10.25cm
Gross Weight 50.7lbsor23kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 39" X 20 3/8" or
99.1 cm X 52 cm
BTU 4800
This appliancehasbeentestedin
accordancewiththeULStandard2021
forfixedandlocationdedicated
electricroomappliancesintheUnited
Statesand Canada.Ifyouneed
assistanceduringinstallation,please
contactyourlocal dealer.
NOTE:Thisappliancemustbe
electricallywiredandgroundedin
accordancewithlocalcodes.Inthe
absenceoflocalcodes,usethe
currentCSAC22.1CanadianElectrical
Codein CanadaortheANSI/NFPA70
NationalElectricalCodein theUnited
States
”

7
BI-50-XTRASLIM
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 49 1/8”or124.9cm
ApplianceHeight 19 7/8”or50.4 cm
ApplianceDepth 4”or10.25 cm
Gross Weight 75lbsor34kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 49" X 20 3/8" or
125cm X 52 cm
BTU 4800
This appliancehasbeentestedin
accordancewith theULStandard2021
forfixedandlocationdedicatedelectric
roomappliancesintheUnitedStatesand
Canada.Ifyouneedassistanceduring
installation,pleasecontactyourlocal
dealer.
NOTE:Thisappliancemustbe
electricallywiredandgroundedin
accordancewith localcodes.Inthe
absenceoflocalcodes,usethecurrent
CSAC22.1 CanadianElectricalCodein
CanadaortheANSI/NFPA70National
Electrical CodeintheUnitedStates.
BI-50-XTRASLIM
Description

8
Description BI-60-XTRASLIM
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 59 1/8”or150.3.cm
ApplianceHeight 19 7/8”or50.4 cm
ApplianceDepth 4”or10.25 cm
Gross Weight 97lbsor44kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 59" X 20 3/8" or
150 cm X 52 cm
BTU 4800
This appliancehasbeentestedinaccordance
with theULStandard2021forfixedand
locationdedicatedelectricroomappliances
intheUnitedStatesandCanada.Ifyouneed
assistanceduringinstallation,pleasecontact
yourlocaldealer.
NOTE:Thisappliancemustbeelectrically
wiredandgroundedinaccordancewith
localcodes.Intheabsenceoflocalcodes,
usethecurrent CSAC22.1Canadian
ElectricalCodeinCanadaortheANSI/NFPA
70 NationalElectricalCodeintheUnited
States.
BI-60-XTRASLIM

SAFETYDRILL SCREWAREA
Thereis asafetydrillscrewareaasshow below.
Pleasemakesurethat thefixscrewsare inthis area.
Themanualcontrolpadposition
Safetydrill screwarea
(Darkarea)
HARD-WIRE INSTALLATION
Turnofftheappliancecompletelyand let coolbeforeservicing.Onlyaqualifiedserviceperson
should serviceandrepairthiselectricappliance.
If itis necessarytohardwirethisappliance,aqualifiedelectricianmustremovethecordconnection,
and wiretheappliancedirectlyto thehouseholdwiring.
This appliancemustbeelectricallyconnectedandgroundedinaccordancewith localcodes,ifhard
wired.Intheabsenceoflocal codes, usethecurrentCSA C22.1CANADIANELECTRICAL CODEin
CanadaorthecurrentANSI/NFPA70 NATIONAL ELECTRICAL CODEintheUnited States.
1. Removethecoverplatefromtheleftsideoftheappliancebyremovingthetwoscrews, as
shownbelow.Unscrewand removepowercord.
9

2. Attachthewiringtothejunctionblock.Pleasemakesurethelivewiregoesintothe “L”,the
neutral wireinto “N”and thegroundwireinto “G”.
3. Puttheplatebackandscrew back.
10
FOR BATHROOM USE
If this unit is installed in a bathroom it must be protected by a GIF receptacle or circuit. If receptacle is
used it must be readily accessible.
To prevent electric shock, please be aware that this unit is an electrical appliance that is NOT watertight
and must be installed as to prevent water from entering unit. This must be installed away from shows,
tubs, etc. Never locate fireplace where it may fall into a bathtub or other water container.
All wiring connections to line power shall be in accordance with local building code requirements.
Inquires about local codes and regulations must be done prior to installation.

The overhang (A) must extend at least 1/2 the roof-line height (B).
Height is measured from the base of the fireplace.
For example: if the roof-line (B) is 8’ above the base of the fireplace,
the overhang (A) must be at least 4’.
11
OUTDOOR INSTALLATIONS
* When installed in outdoor applications, it is recommended that the BI-XTRASLIM models use
the protective PAN-COVER.


The BI-XTRASLIM series electric fireplaces are suitable for installation in outdoor areas protected from
direct water impingement. In addition to maintaining the listed mantel and combustibles clearances, a
rain protection overhang factor of 1/2 shall be constructed to the front and to each side of the installed
appliance. See illustration below. All wiring connections to line power shall be accordance with local
building code requirements. Inquires about local codes and regulations must be done prior to
installation.

INSTALLATION
The BI-XTRASLIM Models are designed to be either built-in or wall-mounted depending on
preference. These units allow for the finishing material (drywall, stone, tile, etc.) to be built right
down to the glass edge. However, should that application not be desirable or available, the included
surround can be used as an alternate finish option.
Note: The optional steel surround is not firmly attached and can be removed from the unit by simply
pulling it off. It is recommended that two people remove the surround.
Theroughwall openingsizeofthefireplace:
W(＂) D(＂) H(＂)
BI-40-XTRASLIM 39 4 1/2 20 3/8
BI-50-XTRASLIM 49 4 1/2 20 3/8
BI-60-XYRASLIM 59 4 1/2 20 3/8
1. Carefully remove the unit from the packaging. Plug in and test the fireplace prior to installation.
Built-in Installation Instructions
12
BI-30-XTRASLIM 29 4 1/2 20 3/8

2. Remove the optional trim from the unit as illustrated below. Remove the wall framing plates from
the unit.
3. Re-attach the framing plates to the unit as shown below.
13

14
4. Bend the framing plates as shown.
5. Lift the unit into the wall opening.
Note: Two people are required

15
6. Drive the mounting screws threw the framing plates securing the unit into the wall studs.
7. Using desired materials, finish to the glass for a clean face installation OR re-attach the steel
surround that was removed in STEP 1.

16
Wall-mount installation instructions
1. Take out the unit from the box. Please do the pre-test before you install the fireplace.
2. Pull out the optional trim from the unit as shows below. Remove the framing plates from the unit.
Note: The mantel is available for Optional Purchase only and does not come with the unit.

17
3. Fix the brackets as the picture shows below. You can find the brackets in the plastic bag with the
manual.
4. Make sure the brackets are fixed the right way as the picture shows below.

5. Put the fireplace into the back of the wooden frame.
6. Screw the brackets with the wooden frame and make sure the fireplace and the wooden frame are
firmly fixed.
18

7. Take the hanger from the back of the fireplace by removing screws. Select a location for the
hanger to be fixed that is not prone to moisture and is located at least 0.91 m or 3 feet away from
combustible materials such as curtains, drapes, furniture, bedding, paper, etc. Before drill, check
the wall to ensure there is no wiring, pipe wires etc in the area. Drill 8 or more holes ( 8mm
diameter & 40mm depth) using a suitable size drill and put the wall plugs into the hole.
8. Fix the hanger onto the wall and put the fireplace on.
19

9.
Fix a bracket beneath the fireplace to ensure the fireplace won’t move.
20