Amantii WM-BI-28-3421 User manual

-58-6421,
This manual will enable you to obtain a safe, efficient and dependable installaon and operaon of your electric fireplace.
Please read and understand these instrucons before beginning your installaon.
Do not alter or modify this fireplace or its components under any circumstances. Any modificaon or alteraon of the
fireplace system, including but not limited to the fireplace and accessories, may void the warranty, lisng and approval of
this system and could result in an unsafe and potenally dangerous installaon.
Amani electric fireplace is designed for use as a decorave appliance and/or as a supplemental heater. They are not
intended for connuous use as a primary heat source.
If the informaon in this manual is not followed
exactly, an electric shock or fire may result causing
property damage, personal injury or loss of life.
4006492

TABLE OF CONTENTS
1
CONGRATULATIONS!
WM-BI-28-3421
Page 10
Page 11
Page 19
Page 20
Page 30
Page 28
Page 29
Page 31
Page 13
Page 14
WM-BI-43-5123
WM-BI-43-5123
WM-BI-58-6421
WM-BI-58-6421
WM-BI-76-8221
WM-BI-106-11524
Mood Light
Spare Parts List
Care and Maintenance

IMPORTANTINSTRUCTIONS
WARNING!
SAVE THESE INSTRUCTIONS
3
B
A
C D
Fig. 1
Grounding Pin
Cover Of Grounded
Outlet Box
Metal
Screws
Adapter
Grounding
Means Grounding
Pin
immediately turn the heater off, unplug the heater and inspect for any objects on or adjacent to the heater that may have
blocked the airflow orotherwise caused high temperatures to have occurred. DO NOT OPERATE THE HEATER WITH THE
This heater has included a visual alarm to warn that parts of the h
ALARM ILLUMINATED.
at A.
grounded
Air Vent has extreme hot when in use. Keep the electrical cord do not closer the air vent.17.
The prevent a possible fire, do not block aire intakes or exhaust in any manner.

WM-BI-28-3421
4
WM-BI-28-3421
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
28” or 71.50 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
46.76 lbs or 21.21kg
Right side
Appliance Width
Appliance Height
Appliance Depth
Gross Weight
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
15W
MOTOR HEATER
MOTOR FLAME
14.5W
4W
21
93
16
24 1
5
34
28
51
2
17
21
16
73
16
5
16
17
16
7
8
17 11
16
7 8
4006492
This appliance has been tested in
accordance with the UL Standand 2021 for
appliances in the United States and Canada. If
please contact your local dealer.
NOTE:This appliance must be electrically
wired and grounded inaccordance with
local codes. In the absence of local codes,
us the currentCSA C22.1Canadian
Electrical Code in Canada or ANSI/NFPA 70

WM-BI-43-5123
5
WM-BI-43-5123W
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
43” or 109.30 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
70.00 lbs or 31.75kg
Right side
Appliance Width
Appliance Height
Appliance Depth
Gross Weight
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
23W
MOTOR HEATER
MOTOR FLAME
14.5W
4W
23
93
16
39
51
2
17
21
16
51
73
16
5
16
17
16
7
8
7
8
43
4006492
This appliance has been tested in
accordance with the UL Standand 2021 for
appliances in the United States and Canada. If
please contact your local dealer.
NOTE:This appliance must be electrically
wired and grounded inaccordance with
local codes. In the absence of local codes,
us the currentCSA C22.1Canadian
Electrical Code in Canada or ANSI/NFPA 70

This appliance has been tested in
accordance with the UL Standand 2021 for
appliances in the United States and Canada. If
please contact your local dealer.
NOTE:This appliance must be electrically
wired and grounded inaccordance with
local codes. In the absence of local codes,
us the currentCSA C22.1Canadian
Electrical Code in Canada or ANSI/NFPA 70
REMARK: Metal Front Fireplaces have not
included Moon Light, Mood Light Remote
Control and Touch Panel Feature.
WM-BI-43-5123
6
WM-BI-43-5123
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
43” or 109.20 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
59.79 lbs or 27.12kg
Right side
Appliance Width
Appliance Height
Appliance Depth
Gross Weight
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
23W
MOTOR HEATER
MOTOR FLAME
14.5W
4W
51
23
39 1
2
93
16
43
51
2
17
73
8
3
8
31
16
19
16
13
16
19
16
4006492

7
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
58” or 147.30 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
84.99 lbs or 38.55kg
Right side
Appliance Width
Appliance Height
Appliance Depth
Gross Weight
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
27W
MOTOR HEATER
MOTOR FLAME
14.5W
6W
WM-BI-58-6421
WM-BI-58-6421
21
93
16
54 7
16
64
51
2
17
21
16
73
16
5
16
17
16
7
8
7
8
58
4006492
This appliance has been tested in
accordance with the UL Standand 2021 for
appliances in the United States and Canada. If
please contact your local dealer.
NOTE:This appliance must be electrically
wired and grounded inaccordance with
local codes. In the absence of local codes,
us the currentCSA C22.1Canadian
Electrical Code in Canada or ANSI/NFPA 70

8
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
58” or 147.30 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
74.78lbs/33.92kg
Right side
Appliance Width
Appliance Height
Appliance Depth
Gross Weight
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
27W
MOTOR HEATER
MOTOR FLAME
14.5W
6W
WM-BI-58-6421
WM-BI-58-6421
4006492
This appliance has been tested in
accordance with the UL Standand 2021 for
appliances in the United States and Canada. If
please contact your local dealer.
NOTE:This appliance must be electrically
wired and grounded inaccordance with
local codes. In the absence of local codes,
us the currentCSA C22.1Canadian
Electrical Code in Canada or ANSI/NFPA 70
REMARK: Metal Front Fireplaces have not
included Moon Light, Mood Light Remote
Control and Touch Panel Feature.

9
WM-BI-76-8221
WM-BI-76-8221
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
76” or 193.00 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
104.35 lbs or 47.33kg
Right side
Appliance Width
Appliance Height
Appliance Depth
Gross Weight
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
30W
MOTOR HEATER
MOTOR FLAME
14.5W
6W
21
93
16
70
82 51
2
17
21
16
73
16
5
16
17
16
7
8
7
8
76
4006492
This appliance has been tested in
accordance with the UL Standand 2021 for
appliances in the United States and Canada. If
please contact your local dealer.
NOTE:This appliance must be electrically
wired and grounded inaccordance with
local codes. In the absence of local codes,
us the currentCSA C22.1Canadian
Electrical Code in Canada or ANSI/NFPA 70

4
WM-BI-106-11524
10
WM-BI-106-11524
Built-In Appliance
120V AC,60Hz
1400W
11.7A
Model Number
Voltage
Amps
106” or 269.30 cm
17” or 43.00 cm
5 1/2” or 14.00 cm
153.64 lbs or 69.69kg
Right side
Appliance Width
Appliance Height
Appliance Depth
Gross Weight
Cord Length 74.81” or 190.00 cm
HEATER HIGH
LOW
NO HEATER
1350W
675W
35W
MOTOR HEATER
MOTOR FLAME
14.5W
6W
51
2
17
29
16
73
16
5
16
17
16
7
8
24
93
16
103 1
115
7
8
106
4006492
This appliance has been tested in
accordance with the UL Standand 2021 for
appliances in the United States and Canada. If
please contact your local dealer.
NOTE:This appliance must be electrically
wired and grounded inaccordance with
local codes. In the absence of local codes,
us the currentCSA C22.1Canadian
Electrical Code in Canada or ANSI/NFPA 70

INSTALLATION OVERVIEW
NOTE: BEFORE YOUINSTALL
SITE SELECTION
One Mood LED remote control
One Remote Control
WARNING:
T
Phillip rewdriver
aw and/ aw
Level
Tape
Pliers
re
Gloves
11
E
Fr aterials
Wall Finishing Materials
Caulking Materials
:
TOOLS & BUILDING SUPPLIES
NORMALLY REQUIRED
Volt cir r red.
cated cir referr
Power supply Wire Gage
Voltage Wire Gage Fuse
120 v 14 G .15 MP
Wall switch / thermostat Wire Gage
VoltageWire Gage
5 Volts 18 Gage
PACKAGING LIST
with:
Review and consider all of the following
Your new fireplace may be wall mounted,
a wall. that may catch fire or block openings such as drapes,
pillows, furniture etc.
2. For the best effect install the fireplace out of direct
electrical outlet for ease of electrical hook up.
4. Remove fireplace, front, fireglass media, and all
hardware from box and remove all packaging related
5. Plug in the unit, then press the POWER key on the
lights are working correctly. (see page 22)
6. Press ON/OFF key to close the unit, then pull the
plug from the socket. Store the fireplace in a safe, dry
fireplace.
Ensure the power cord is not installed so
that it is pinched or against a sharp edge
and ensure that the power cord is stored
or secured to avoid tripping or snagging
to reduce the risk of fire, electric shock or
injury to persons.
must comply with local building codes
reduce the risk of fire, electric shock and
injury to persons.
To reduce the risk of fire, do not store or
use gasoline or other flammable vapors
and liquids in the vicinity of the heater.
Dimensions of the unit.
Unit requires a minimum of two (2) wall
Built-In (Page 14 & 15)
Wall Mount (Page 16)
Plumb Line

INSTALLATION OVERVIEW
12
(Figure 3)
Remove sides of box
Remove packaging surrounding the unit and front.
(Figure 4)
Discard packaging materials and store
(Figure 2)
(Figure 1)
28” / 43”/ 58” 76” 106”
28” / 43”/ 58” 76” 106”
(See Page 16)

PACKAGE CONTENTS
E
D
F
CONTENTS
Part Description Quantity Picture
Screw
0.16 in. x 1.0 in.
Wall Plug
0.3 in. x 1.5 in.
20
20
B
A
0.16 in. x 0.6 in. 12
C
Screw
0.16 in. x 0.3 in. 2
D
13
Wood Screw
Part
1GlassA
B1
CWall Bracket 1
D1
1
E
F Mood LED Light Remote
1 (28",43", 58")
2 (76")
3 (106")
Fire Glass Media
A
BC

NEW CONSTRUCTION OR
RENOVATION
CAUTION:
Two people may be needed to
Minimum Clearance of the fireplace to
the adjacent wall
Figure 5
outlets or circuits. To reduce the risk
licensed electrician.
WARNING:WARNING:
14
Sides ---------------------- 6in / 15 cm
Floor ---------------------- min. 2 in / 5 cm
Top ---------------------- 6 in / 15 cm
Back ---------------------- 0 in / 0 cm
min. 15 cm
6 in
min. 15 cm
6 in
min. 5 cm
2 in
WALL
FLOOR
a b c
28”
43”
58”
76”
106”
29”
44”
59”
77”
107”
17 "
2
1
5 "
2
1
5 "
2
1
5 "
2
1
5 "
2
1
5 "
2
1
Model number
WM-BI-43-5123
WM-BI-28-3421
WM-BI-76-8221
WM-BI-58-6421
WM-BI-106-11524
17 "
2
1
17 "
2
1
17 "
2
1
17 "
2
1
a
b
c
Dry Wall
moisture and is located at least 0.91 m or 3
as curtains or drapes, furniture, bedding,
paper, etc.
see how it will look in the future.
store appliance in a safe, dry and dust free
4. Prepare a wall with a framed opening to
accomodate the size of your unit. Leave at
least 1/4" (6mm) around the edge of the
appliance. Any new wiring must be done in
and other applicable
To prevent contact with sagging or
must be installed against vapor barrier
could occur and fire may result.

Fron
FIREPLACE INSTALLATION BUILTIN
Figure 7
Figure 6
NOTE BEFORE YOUINSTALL
Wall
15
Power cord
Power cord
Touch pad
Adjust the unit to achieve the desired
amount of depth. (Figure 6)
brackets (nailing flanges) on the unit and
the wall studs. (Figure 7)
k r ow
w

Floor
It is strongly recommended that the screws be
screwed into the wall studs where possible. If
anchors are used.
(Figure 8)
ke sure it is level.
hanging into the keyholes on the back of the unit.
(Figure 9, Figure 10)
3. Check the appliance for stability ensuring that
the appliance will not pull free from the wall.
Figure 8
Figure 9
NOTE: BEFORE YOU INSTALL
Stakes for hanging
wall bracket
Back of unit
16
Figure 10
Stakes for hanging
Side view
Wall
min. 2 in

- HARDWIRE
Ensure the unit is power off and
the plug is not plugged before
WARNING:
Release the screws
Step 1
Remove the cover
Feed the supply wires thought
the 7/8” @22.2 wire hole and
Lock the power cord stator
Connect the Live wire (Black)
Connect the Ground wire (Yellow)
Connect the Neutral wire (White)
Screw the strain relief
Step 2
cover back
Screw the cover
Touch Panel
Step 3
Touch Panel
HARD WIRING CONNECTION:
wire the appliance directly to household wiring.
This appliance must be electrically connected and grounded in accordance with local codes, If hard wired.
In the absence of local codes, use the current CSA C22.1 Canadian Electrical Code in Canada or the current
17

1. To change from log to Fire Glass Media (Figure 12.1)
log set out.
2. Choose the colour of Fire Glass Media you would like to use. (Figure 11)
3. Place the Fire Glass Media into the Tray (Figure 12.2)
It is not necessary to use all the media supplied.
Figure 12.1
Figure 12.2
Hz-10 Harvest moon
Hz-09 Sun Tea
HZ-01 Clear
18