Amantii TRV-SLIM Series Operating instructions

30-TRV-SLIM
40-TRV-SLIM
50-TRV-SLIM
60-TRV-SLIM
72-TRV-SLIM
INSTALLATION /OWNER’S MANUAL
TRV-SLIM SERIES
INSTALLER: LEAVE OWNER’S MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE.
SAFETY INFORMATION
WARNING
For yo r safety, always comply with all
warnings and safety instr ctions
contained in this man al to prevent
personal inj ry or property damage.
Do not store or use gasoline or other flammable vapors
and li uids in the vicinity of this appliance.
(TV-S190030-1)
(TV-S190040-1)
(TV-S190050-1)
(TV-S190060-1)
(TV-S190072-1)
Version:202308

TABLE OF CONTENTS
Please read and carefully follow all of the instruction found in this manual. The instructions
included here will assure that you have many years of dependable and enjoyable service
from your Amantii product.
IMPORTANT INSTRUCTIONS ......................................................................................................................................... 3
FCC CAUTIONS .................................................................................................................................................................. 4
UNPACKING AND TESTING THE APPLIANCE .......................................................................................................... 5
GROUNDING APPLIANCE ............................................................................................................................................... 5
LOCATING THE FIREPLACE ........................................................................................................................................... 5
30-TRV-SLIM (TV-S190030-1) .........................................................................................................................................
40-TRV-SLIM (TV-S190040-1) ......................................................................................................................................... 7
50-TRV-SLIM (TV-S190050-1) ......................................................................................................................................... 8
0-TRV-SLIM (TV-S1900 0-1) ....................................................................................................................................... ..9
72-TRV-SLIM (TV-S190072-1) ....................................................................................................................................... 10
SAFETY DRILL SCREW AREA ..................................................................................................................................... 11
OUTDOOR INSTALLATION ........................................................................................................................................... 11
FOR BATHROOM USE .................................................................................................................................................... 12
MANTEL CLEARANCE ................................................................................................................................................... 12
HARDWIRE INSTALLATION ........................................................................................................................................ 13
INSTALLATION ................................................................................................................................................................ 14
MEDIA OPTIONS .............................................................................................................................................................. 20
DECORATIVE MEDIA INSTALLATION ...................................................................................................................... 20
OPERATION ....................................................................................................................................................................... 21
MANUAL OPERATION ................................................................................................................................................... 21
REMOTE CONTROL OPERATION ................................................................................................................................ 22
WIFI OPERATION ............................................................................................................................................................. 25
REPLACEMENT PARTS .................................................................................................................................................. 28
EXPLODED VIEW ............................................................................................................................................................ 29
TROUBLE SHOOTING ..................................................................................................................................................... 30
SERVICE HISTORY .......................................................................................................................................................... 31
WARRANTY ...................................................................................................................................................................... 32
QR Code

IMPORTANT INSTRUCTIONS
PLEASE RETA N TH S USER GU DE FOR FUTURE REFERENCE
When using electrical appliances, basic precautions should always be followed to reduce the
risk of fire, electric shock, and injury to persons, including the following:
1) Read all instructions before using this fireplace
2) The fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
Keep combustible material such as furniture, cushions, bedding, paper, clothes, curtains
at least 3 feet from the front of the unit
3) Extreme caution is necessary when any heater is used near children and whenever the
unit is left operating and unattended.
4) Do not operate a fireplace with a damaged cord or plug, or if the heater has
malfunctioned, the fireplace has drooped or damaged in any manner
5) Not all fireplaces are suitable for use in bathrooms or laundry facilities. Please consult
with individual product literature to confirm suitability
6) Do not run the cord under carpeting. Do not cover cord with throw rugs, runners or the
like. Arrange the cord away from traffic area and where it will not be tripped over
7) Do not modify this fireplace. Use it as described in the manual. Any other use not
recommended by the manufacture may cause fire, shock or injury to persons
8) Do not use this heater with programmer, timer, separate remote-control system or any
other device that switches the heater on automatically, since a fire risk exists if the heater
is covered or positioned incorrectly
9) Disconnect all power supply before cleaning, maintenance or relocation of the fireplace
10) Keep the heater clean. Do not allow any objects to enter any ventilation or exhaust
opening as this may cause electric shock, fire or damage to the heater
11) Do not immerse the cord, plug or any part of the appliance in water or any other liquid
12) n order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device
3
CAUTION: Procedures and techniques, which, if not carefully followed, will result in damage to
the equipment.
WARNIN : Procedures and techniques, which, if not carefully followed, will expose the user to
the risk of fire, serious injury, illness or death.
Consult with professional electrician and adhere to all code requirements for
installations in bathrooms
SAVE THESE INSTRUCTIONS

FCC CAUTIONS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: 1) This device may not cause harmful interference, and 2) this device must
accept any interference received, including interference that may cause undesired
operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
4

UNPACKING AND TESTING APPLIANCE
Carefully remove the appliance from the box.
Prior to installing the appliance, test to make sure the appliance operates properly by plugging the
power supply cord into a conveniently located 120 Volt grounded outlet.
Test all aspects of its operation (manual switches, remote and heater) to make sure all components
operate correctly.
As with most electronic devices, your new electric fireplace has been designed to operate at
temperatures between 5 ℃ (41℉) and 35 ℃ (95℉). During the cold winter months, allow the
fireplace to reach room temperature before turning it on.
NOTE: Th r may b trac of odor during th first f w minut s of initial us . This is harml ss,
normal and will n v r occur again.
GROUNDING APPLIANCE
This appliance is for use on 120 Volts. The cord has a plug as shown in (A). An adapter as shown in (C)
is available for connecting three-blade grounding type plugs to two-slot receptacles. The green
grounding lug extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is
available.
To disconnect appliance, turn controls to off, then remove plug from outlet.
LOCATING THE FIREPLACE
Plan where to locate and frame the fireplace. This will save time and money later when you install
the fireplace. Before installation consider the following:
1. Where the fireplace is located must allow for wall and ceiling clearances
2. Consider a location where the fireplace screen will not be exposed to direct sunlight from
windows or doors.
3. A 15 ampere, 120 Volt, 60 Hz branch circuit with proper ground must be available at the location.
Preferably a dedicated branch circuit should be provided to avoid circuit breakers to trip of fuses
to blow.
5
Note : Adaptor are NOT for use in Canada

30-TRV-SLIM (TV-S190030-1)
Description Built-inAppliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 24.8W
MOTOR HEATER 19W
ApplianceWidth 33 1/4”or84.4.cm
ApplianceHeight 26 5/8”or67.7 cm
ApplianceDepth 10 5/8”or27cm
Gross Weight 97 lbs or44 kgs
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 33 3/4”27 1/8“or
85.7cm cm
BTU 5118
3314" [843.6mm]
5" [126.8mm] 1558" [398.4mm]
2658" [676.8mm]
2958" [753mm]
1058" [269mm]
478" [125mm]
1118" [284mm]
378" [100mm]
This appliance has been tested in
accordance with the UL Standard 0 1 for
fixed and location dedicated electric room
appliances in the United States and Canada.
If you need assistance during installation,
please contact your local dealer.
NOTE: This appliance must be
electrically wired and grounded in
accordance with local codes. In the
absence of local codes, use the current
CSA C22.1 Canadian Electrical Code in
Canada or the ANSI/NFPA 70 National
Electrical Code in the United States.
6
68.9

Description Built-inAppliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 26W
MOTOR HEATER 19W
ApplianceWidth 43 1/4”or109.7cm
ApplianceHeight 26 5/8”or67.7 cm
ApplianceDepth 10 5/8”or36.3 cm
Gross Weight 110.23 lbs or 50 kgs
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 43 3/4”27 1/8“or
111.2cm cm
BTU 5118
4314" [1097.6mm]
5" [126.8mm] 1558" [398.4mm]
2658" [676.8mm]
3958" [1007mm]
1058" [269mm]
478" [125mm]
1118" [284mm]
378" [100mm]
This appliance has been tested in
accordance with the UL Standard 0 1 for
fixed and location dedicated electric room
appliances in the United States and Canada.
If you need assistance during installation,
please contact your local dealer.
NOTE: This appliance must be
electrically wired and grounded in
accordance with local codes. In the
absence of local codes, use the current
CSA C22.1 Canadian Electrical Code in
Canada or the ANSI/NFPA 70 National
Electrical Code in the United States.
7
40-TRV-SLIM (TV-S190040-1)
68.9

Description Built-inAppliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 29.3W
MOTOR HEATER 19W
ApplianceWidth 53 1/4”or135.2 cm
ApplianceHeight 26 5/8”or67.7 cm
ApplianceDepth 10 5/8”or27cm
Gross Weight 130.07 lbs or 59 kgs
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 53 3/4”27 1/8“or
136.5cm cm
BTU 5118
5314" [1351.6mm]
5" [126.8mm] 1558" [398.4mm]
2658" [676.8mm]
4958" [1261mm]
1058" [269mm]
1118" [284mm]
378" [100mm]
This appliance has been tested in
accordance with the UL Standard 0 1 for
fixed and location dedicated electric room
appliances in the United States and Canada.
If you need assistance during installation,
please contact your local dealer.
NOTE: This appliance must be
electrically wired and grounded in
accordance with local codes. In the
absence of local codes, use the current
CSA C22.1 Canadian Electrical Code in
Canada or the ANSI/NFPA 70 National
Electrical Code in the United States.
50-TRV-SLIM (TV-S190050-1)
68.9

Description Built-inAppliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 30.6W
MOTOR HEATER 19W
ApplianceWidth 63 1/4”or160.6.cm
ApplianceHeight 26 5/8”or67.7 cm
ApplianceDepth 10 5/8”or27cm
Gross Weight 154.32 lbs or 70 kgs
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 63 3/4”27 1/8“or
162cm cm
BTU 5118
2658" [676.8mm]
5" [126.8mm] 1558" [398.4mm]
5958" [1515mm]
6314" [1605.6mm] 1058" [269mm]
478" [125mm]
1118" [284mm]
378" [100mm]
This appliance has been tested in
accordance with the UL Standard 0 1 for
fixed and location dedicated electric room
appliances in the United States and Canada.
If you need assistance during installation,
please contact your local dealer.
NOTE: This appliance must be
electrically wired and grounded in
accordance with local codes. In the
absence of local codes, use the current
CSA C22.1 Canadian Electrical Code in
Canada or the ANSI/NFPA 70 National
Electrical Code in the United States.
9
60-TRV-SLIM (TV-S190060-1)
68.9

Description Built-inAppliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 32.5W
MOTOR HEATER 19W
ApplianceWidth 75 1/4”or191cm
ApplianceHeight 26 5/8”or67.7 cm
ApplianceDepth 10 5/8”or27cm
Gross Weight 176.37 lbs or 80 kgs
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 75 3/4”27 1/8“or
192.4cm cm
BTU 5118
1558" [398.4mm]
5" [126.8mm]
2658" [676.8mm]
7514" [1910.4mm]
7158" [1819.8mm]
1058" [269mm]
478" [125mm]
1118" [284mm]
378" [100mm]
This appliance has been tested in
accordance with the UL Standard 0 1 for
fixed and location dedicated electric room
appliances in the United States and Canada.
If you need assistance during installation,
please contact your local dealer.
NOTE: This appliance must be
electrically wired and grounded in
accordance with local codes. In the
absence of local codes, use the current
CSA C22.1 Canadian Electrical Code in
Canada or the ANSI/NFPA 70 National
Electrical Code in the United States.
10
72-TRV-SLIM (TV-S190072-1)
68.9

Safetydrill screwarea
(Darkarea)
SAFETY DRILL SCREW AREA
There is a safety drill screw area as show below.
Please make sure that the fix screws are in this area.
11
OUTDOOR INSTALLATION
 !"#$% &&'(
)&&$*$+, -(
, .&$$% &'&/0**$+, -1
* 0(
AB


This electric fireplace is suitable for installation in outdoor areas protected from direct water
impingement. In addition to maintaining the listed mantel and combustibles clearances, a
rain protection overhang factor of 1/2 shall be constructed to the front and to each side of the
installed appliance. ee illustration below. All wiring connections to line power shall be in
accordance with local building code requirements. Inquires about local codes and
regulations must be done prior to installation.

12
Consult with professional electrician and adhere to all code requirements for
installations in bathrooms
FOR BATHROOM USE
If this unit is installed in a bathroom it must be protected by a GIF receptacle or circuit. If
receptacle is used it must be readily accessible.
To prevent electric shock, please be aware that this unit is an electrical appliance that is
NOT watertight and must be installed as to prevent water from entering unit. This must be
installed away from shows, tubs, etc. Never locate fireplace where it may fall into a bathtub
or other water container.
All wiring connections to line power shall be in accordance with local building code
requirements. Inquires about local codes and regulations must be done prior to installation.
MANTEL CLEARANCE
The clearance to the mantel should be 6” minimum when a mantel is applied (Measurement
is taken from the glass front).
6"
Fireplace Mantel
Wall (Combustible facing allowed)
Floor
Fireplace

1.
Remove the cover plate from the left side of the appliance by removing the two screws
as shown below. Unscrew and remove power cord.
2. Attach the wiring to the
junction block. Please make sure the live wire goes into the “L”, the
neutral wire into “N” and the ground wire into “G”.
3.
Return the cover plate to the left side and screw the two screws back in to fasten the
Remove the cover plate from the left side of the appliance by removing the two screws
as shown below. Unscrew and remove power cord.
junction block. Please make sure the live wire goes into the “L”, the
neutral wire into “N” and the ground wire into “G”.
Return the cover plate to the left side and screw the two screws back in to fasten the
Remove the cover plate from the left side of the appliance by removing the two screws
junction block. Please make sure the live wire goes
into the “L”, the
Return the cover plate to the left side and screw the two screws back in to fasten the
plate.
HARD IRE INSTALLATION
Turn off the appliance completely and let cool before servicing. Only a qualified
person should service and repair this electric appliance.
Turn off the appliance completely and let cool before servicing. Only a qualified
person should service and repair this electric appl
iance.
Turn off the appliance completely and let cool before servicing. Only a qualified
service
If it is necessary to hardwire this appliance, a qualified electrician must remove the cord
connection, and wire the appliance directly to the house hold wiring.
This appliance must be electrically connected and grounded in accordance with local codes,
if hardwired. In the absence of local codes, use the current C A C22.1 CANADIAN
ELECTRICAL CODE in Canada or the current AN /NFPA 70 NATIONAL ELECTRICAL
CODE in the United tates.
13

INSTALLATION
2. Take off the fending bars and panels if you
want to view the fire from three angles.
3. Screw back the fending bar after the panel
is removed.
fending bar
fending panel
The TRV-SLIM models are designed to be built-in and allow for the finishing material (drywall, stone,
tile, etc) to be built right down to the glass edge.
The rough wall opening size of the fireplace:
NOTE: Due to the many different materials used on different walls, it is highly recommended that
you consult your local builder before you install this appliance.
. Remove the framing plates from the
fireplace and fix them as the picture shows.
NOTE: After removing framing plates on the
left and right sides, screw back the screws.
W(“) D(“) H(“)
30-TRV-SLIM
(TV-S190030-1) 33 3/4 11 1/8 27 1/8
40-TRV-SLIM
(TV-S190040-1) 43 3/4 11 1/8 27 1/8
50-TRV-SLIM
(TV-S190050-1) 53 3/4 11 1/8 27 1/8
60-TRV-SLIM
(TV-S190060-1) 63 3/4 11 1/8 27 1/8
72-TRV-SLIM
(TV-S190072-1) 74 3/4 11 1/8 27 1/8
1. Product is fixed with fending bars and
panels on the left and right side.
W
D
H
1. Product is fixed with fending bars and
panels on the left and right side.
W
D
H
14

5. Make an opening for the fireplace according
to requested measurement.
6. Insert the fireplace into the wall opening.
Drive the mounting screws into the frame
plates on the unit and the wall studs. To fix
the bottom of the fireplace and the wall
studs with the framing plates that you’ve
removed from left and right side of the
fireplace at STEP . Plug in and check if the
fireplace works.
7. After checking that the fireplace operates
properly, cover the glass panels with
protective plastic bag and install plywood or
drywall.
framing plate
framing plate
15

8. Decorate the plywood or drywall with
glazed tile, wallpaper, etc.
Installation for Front and right side
Viewing
1. To install the fireplace where the left side is
close to a wall, and you want to view the
fire from front and right side, take off the
fending panel on the right.
2. Unscrew 7screws on the right side that fix
the fending bar and panel and then take off
the fending bar and panel.
3. After the fending panel is removed, screw
back the bar.
. Remove the framing plates from the
fireplace and fix them as the picture shows.
NOTE: After removing framing plates on the
left and right sides, screw back the screws.
16

5. Make an opening for the fireplace according
to requested measurement.
6. Insert the fireplace into the wall opening.
Drive the mounting screws into the frame
plates on the unit and the wall studs. To fix
the bottom of the fireplace and the wall
studs with the framing plates that you’ve
removed from left and right side of the
fireplace at STEP . Plug in and check if the
fireplace works.
7. After checking that the fireplace operates
properly, cover the glass panels with
protective plastic bag and install plywood or
drywall.
8. Decorate the plywood or drywall with
glazed tile, wallpaper, etc.
17

Installation for Front and Left Side
Viewing
1. Install the fireplace where the right side is
close to a wall, and you want to view the
fire from front and left side, take off the
fending panel on the left.
2. Unscrew 7 screws on the left side that fix
the fending bar and panel and then take off
the fending bar and panel.
3. After the fending panel is removed, screw
back the bar.
. Remove the framing plates from the
fireplace and fix them as the picture shows.
NOTE: After removing the framing plates on
the left and right sides, screw back the
screws.
5. Make an opening for the fireplace according
to requested measurement.
1

6. Insert the fireplace into the wall opening.
Drive the mounting screws into the frame
plates on the unit and the wall studs. To fix
the bottom of the fireplace and the wall
studs with the framing plates that you’ve
removed from left and right side of the
fireplace at STEP . Plug in and check if the
fireplace works.
7. After checking that the fireplace operates
properly, cover the glass panels with
protective plastic bag and install plywood or
drywall.
8. Decorate the plywood or drywall with
glazed tile, wallpaper, etc.
19

MEDIA OPTIONS
The TRV-SLIM series models are shipped with DESIGN-MEDIA-BIRCH-10PCE.
MEDIA OPERATION
1. Unscrew2screwsandtakeofftwobracketswhich
arefendingthefrontglasspanel.
Screwsandbrackets
2. Afterthebracketsareremoved,thefrontglasspanel
willfalldownautomatically.
4. Installingthefireglass media.Pourthefire
glass media intothetrayasshownbelow.
Feelfreetouseanycombination of fireglass
mediathatyoufind mostappealing.
3. Takeoffthefrontglasspanelandputitinsafeplace.
5. Putbackthefrontglassandscrewbackthebracket.
DESIGN-MEDIA-BIRCH-10PCE
20