Amart Furniture VALHALLA 74497 User manual

INSERT LINE DRAWING IMAGE OF PRODUCT
INCLUDING DIMENSIONS
HEIGHT – WIDTH - DEPTH
Imported by Amart Furniture Pty Ltd, Brisbane QLD Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
VALHALLA DINING TABLE
ITEM CODE 74497
Imported by Amart Furniture Pty Ltd, Brisbane, QLD Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
174497

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
274497

PARTS LIST
1
TABLE TOP
2
METAL LEGS
374497

STEP 1: Flip the table top①upside down, carefully. Fasten the
table legs②to the table top①with bolt (A) ,spring washer(B)&
washer (C) separately using spanner (D).
STEP 2: Flip the table upright, carefully .
Assembly is complete.
474497

574497
CARE AND MAINTENANCE
Timber
As our timber is supplied from sustainable forests there will be natural variations in
surface texture and grain like knots, mineral streaks
and sap runs that may affect the finish. These differences in character are not defects,
but distinctions that make each piece of
furniture unique
Our furniture is built to last. Following these steps for basic care should protect your
investment for years to come
• Dust frequently with a clean damp lint-free cloth. This will help remove abrasive build
up which can damage a finish over time
• Do not place hot objects on any furniture surface. Always use a hot plate or placemat.
Laminate and lacquer finishes on table tops
provide added scratch and heat resistance to our furniture, but they can still be
damaged without proper care
• Avoid exposing your furniture to strong sunlight, heat outlet, open windows or
dampness. Prolonged exposure to direct sunlight can
fade the finish of your furniture, while extreme temperature and humidity changes can
cause cracking or splitting
• Do not expose your furniture to any liquids. Never allow water to sit on your furniture.
Alcohol, nail polish and perfume are also
dangerous as they will dissolve the lacquer finish on contact and may require
professional repairs
• Do not allow plastic to come in direct contact with your furniture. Chemicals in the
plastic of placemats etc. may soften and mark the
finish if left in contact with the furniture for a period of time