Amart Furniture 73829 User manual

Imported by Amart Furniture Pty Ltd, ,Brisbane, Qld, Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
Valdis ETU BLK
ITEM CODE 73829
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please
phone Amart Furniture , Customer Service Free call 1800 351
084
1ITEM CODE 73829
500mm

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the
product
2.Take care when lifting. Product should be assembled as near as possible to the point of
use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 73829
We recommend using a
screwdriver to put this item
together. However if you choose
to use a power drill it must be
used on LOW SPEED (LOW
TORQUE) as too much pressure
could damage the product
ALLOW 60 MINITES 2 PEOPLE REQUIRED

3ITEM CODE 73829
PARTS LIST
1
2
3
4
6
10
9
11
12
X4
X6
5
1
Door Handle
2
Support Bar
3
Top Board
4
Side Board
5
Side Board
6
Bottom Board
7
Middle Board
8
Back Board
9
Left Door
10
Right Door
11
Frame
12
Frame
7
8
10
9

I.
ITEM CODE 738294
A. Ø15X12mm
AX6 BX6 CX12
C. Ø8X40
DX6
D. M5X50
FX40
F. M3.5X15 G. M4*14
GX24
E. M3.5*16mm
EX8
H.
HX8
M. M6X15mm
MX16
N.
IX4
J.
JX4
K.
KX4
L.
LX4
O.
OX1
B. M6X39mm

ITEM CODE 738295
STEP:1
STEP:2
CX12
C. Ø8X40
I.
IX4
E
I!
C
4
5
7
3
E. M3.5*16mm
EX8
Insert dowel（C）to side board (4)、(5) and middle board (7)
Fix door catch (I) to top board (3) with
screw (E)

ITEM CODE 738296
STEP:3
STEP:4
BX6
B. M6X39mm
A. Ø15X12mm
AX6
B
AA
B
3
4
5
7
3
Fix cam pin（B）to top board（3）
Attach side board (4)(5) and middle board (7) to top board (3)
with cam locks(A)

ITEM CODE 738297
STEP:5
STEP:6
DX6
D. M5X50
M. M6X15mm
MX4
O.
OX1
D
M
4
5
7
3
6
4
5
73
611
D
O
Attach bottom board (6) to the body with screws (D)
Attach frame (11) to bottom board (6)
with bolt (M)

ITEM CODE 738298
STEP:7
STEP:8
M. M6X15mm
MX6
O.
OX1
M. M6X15mm
MX6
O.
OX1
4
5
7
3
6
4
5
7
3
2
12
o
2
2
2
2
26
M
O
M
O
Fix support bar (2) to frame (11) with
bolt (M)
Attach frame (12) to the body with bolt (M)
11
11

ITEM CODE 738299
STEP:9
STEP:10
G. M4*14
GX24
FX8
F. M3.5X15
J.
JX4
G
F
J
10
9
10
9
4
56
8
Attach back board (8) to the body with screws (G)
Fix stopper (J) to door board (9)(10) with screws (F)

ITEM CODE 7382910
STEP:11
STEP:12
FX16
F. M3.5X15
K.
KX4
L.
LX4
KF
K
K
!
!
!
L
F
K
L
L
K
H
H.
HX8
10
9
10
9
10
9
10
9
H
1
1
1
1
Fix hinge (K)(L) to door
board (9)(10) with screws (F)
Fix handle (1) to door board (9)(10) with screws (H)

ITEM CODE 7382911
STEP:13
L
FX16
F. M3.5X15
K
L
!
K
!
4
5
3
6
10
9
9
10
10
9
10
9
3
65
4
K
F
FL
Attach door (9)(10) to the body with screws (F)

ITEM CODE 7382912
ASSEMBLY COMPLETE

13 TEM ICODE 73829
SAFETY BRACKETS INSTRUCTIONS
1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach
the Mounting Plate into a stud. If mounting into brick or masonry you will need to
acquire wall anchors.
2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
3. Move the furniture to its final position. Thread a Wall Strap through the both
Mounting Plates and tighten until snug. Do not over tighten.
4. Make sure that the Mounting Plates are firmly attached to the wall and furniture
and that the Wall Strap is snug.
HARDWARE
Mounting Plate x 2 Wall Strap x 1 Large Screw x2 Small Screw x2

14
To protect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp materials (knife, fork, etc.) directly onto your
furniture as sharp material may scrape and damage the finish.
•Do not place material with high temperature directly onto the
surface of your furniture.
•Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
TEM ICODE 73829