Amart Furniture CHRYSTELLE 68733 User manual

ASSEMBLY INSTRUCTION
CHRYSTELLE 6 DRAWER DRESSER WITH MIRROR
ITEM CODE:68733
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
1
920mm
1000mm
890mm
440mm
1500mm
50mm
68733

2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
68733

3
PARTS LIST
2
3 2 pcs
1 Dresser 1 set
Mirror leg
NO. PARTS LIST QT'Y
Mirror 1 set Bolt M6x35mm 8 pcs
NO. HARDWARE LIST QT'Y
B
CAllen Key 4mm 1 pc
A
1
2
3
3
8 pcs
Flat washer M6/Ø14
DAdhesive felt pad
20x20x5 8 pcs
68733

4
STEP 1: With two people carefully lay the Dresser on to a sheet or
piece of cardboard.
Attach adhesive felt pad (D) onto the legs.
With two people carefully stand the Dresser upright.
D
1
68733

5
STEP 2: Attach Mirror legs (3) to Mirror (2) and Dresser (1) with bolt (A) and
washer (B), tighten it up by using an allen key (C)
A(X8)
B(X8)
C
WALL
Fixing the strap to the wall
As the wall materials vary,
screws for fixing to the wall
are not included.
For advice on suitable screws
systems, contact your local
specialised dealer.
1
2
3
3
68733

6
ASSEMBLY IS COMPLETE
WALL
68733

IMPORTANT: CARE GUIDE FOR YOUR TIMBER FURNITURE
Please read on for important information regarding your purchase…
A multi-step finish is applied to all our furniture, but all wood comes from nature. Because of
this, there will be natural variations in surface texture and grain like knots, mineral streaks and
sap runs that may affect the finish.
These differences in character are not defects, but distinctions that make each piece of furniture
unique.
Our furniture is built to last. Following these steps, basic care should protect your investment
for years to come.
Dust frequently with a clean damp lint-free cloth. This will help remove abrasive build up
which can damage a finish over time.
Do not place hot objects on any furniture surface. Always use a suitable placemat.
Laminate and lacquer finishes on table tops provide added scratch and heat resistance
to our furniture, but they can still be damaged without proper care.
Avoid exposing your furniture to strong sunlight, heat, open windows or dampness.
Prolonged exposure to direct sunlight can fade the finish of your furniture, and sudden
extreme temperature and humidity changes can cause cracking or splitting.
Do not expose your furniture to any liquids. Never allow water to sit on your furniture.
Alcohol, nail polish and perfume are also dangerous as they will dissolve the lacquer
finish on contact and may require professional repairs.
Do not allow plastic to come in direct contact with your furniture. Chemicals in the
plastic of placemats ect may soften and mark the finish if left in contact with the
furniture for a period of time.
GLASS:
If the glass is chipped or broken, stop using the product and consult place of purchase
WARNING:
Do not place very hot or cold items on the glass surface unless adequately thick table
mats are used to prevent such items coming in contact with the glass
Do not sit or stand upon the glass surface
Do not use the glass as a chopping surface
Do not strike the glass with hard or pointed items
When cleaning the glass panels use a damp cloth or leather with washing up liquid or
soft soap if necessary. Do not use washing powders or any other substances containing
abrasives since these may scratch the glass.
68733
7
Congratulations! You have just purchased a quality product from Amart furniture