Amart Furniture LORAS 64710 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
LORAS ACCENT CHAIR
ITEM CODE 64710
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
PAGE 1 OF 5 64710
Depth: 95cm

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose aclean, level, spacious assembly area.Avoid hard surfaces that may
damage the product
2. Take care when lifting.Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
PAGE 1 OF 5 64710
20
2
2
Note:
Always use two people when turning yoursofa over.

PARTS LIST
PAGE 1 OF 5 64710
PLEASE NOTE:
PIECES REQUIRED FOR ASSEMBLY ARE LOCATED INSIDE THE DUST
COVER UNDERNEATH SOFA
M10x45
M10
M4x40

Step 1
DETAILS (1) -Align base plate of each foot (B) with the pre-threaded holes in the undersides
of the sofa as shown in the below diagram. Insert Bolt (A) and tighten by turning clockwise
using Allen key (C) . Insert Screw (D) using additional tool.
Step 2 ASSEMBLY COMPLETED
PAGE 1 OF 5 64710
IMPORTANT:
PLEASE ENSURE FEET ARE TIGHTENED SECURELY BEFORE USE!

CARE LABEL
PAGE 1 OF 5 64710