Amart Furniture SILVERWOOD MK2 67407 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture,Customer Service Free call 1800 351 084
ASSEMBLYJINSTRUCTION
SILVERWOODJMK2JSTOOL
ITEMJCODEJ67407
ImportedJbyJAmart FurnitureJPtyJLtd,JQld,JBrisbaneJAustralia.
ForJanyJassistanceJwithJassemblyJorJforJmissingJpartsJpleaseJ
phoneJAmart Furniture.
CustomerJServiceJFreeJcallJ1800J351J084
1ITEMJCODEJ67407

PRE-ASSEMBLY+PREPARATION
Before you start:
1.Choose aclean, level, spacious assembly area.Avoid hard surfaces that may
damage the product
2.Take care when lifting.Product should be assembled as near as possible to
the point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2ITEMJCODEJ67407

3ITEMJCODEJ67407
PARTS+LIST
1 BACK FRAME
2 SEAT
3 FRONT LEG(LEFT)
4 FRONT LEG(RIGHT)
5 FRONT STRECHER
6 SIDE STRECHER(LEFT)
7 SIDE STRECHER(RIGHT)

4ITEMJCODEJ67407
HARDWARE+LIST
•ConnectJtheJ2JfrontJlegs(3)&(4)withJtheJfrontJstretcher(5)JusingJ
screws(G)
STEP+1

ITEMJCODEJ674075
•LocateJtheJcornersJofJtheJseat(2)JoppositeJtoJtheJcenterJJJJJJJJJJJJJJ
hole.JInsertJtheJfrontJlegs(3)&(4)JintoJtheJcornersJofJtheJboxJ
seat(2).JJAssembleJbolts(B),JlockJwashers(F)JandJflatJwashersJ(E)J
throughJeachJcornerJblockJofJtheJseat(2),JusingJAllenJKeyJ(D).
•DoJnotJfullyJtightenJallJtheJboltsJatJthisJpoint.
•InsertJtheJsideJstretchers(6)&(7)intoJtheJwholesJofJtheJfrontJlegsJ
andJconnectJwithJscrewsJ(G).JNoteJtheJdistinctionJbetweenJleftJ
andJright
STEPJ2

ITEMJCODEJ674076
•PlaceJtheJseat(2)JonJtheJbackJframe(1).JInsertJtheJsideJ
stretchers(6)&(7)JintoJtheJwholesJofJtheJbackJframe(1)JandJconnectJ
withJscrews(G).JAssembleJtheJbolts(A),JlockJwashers(F)JandJflatJ
washers(E)onJtoJtheJbackJframe(1),JusingJAllenJKey(D).JDoJnotJfullyJ
tightenJallJtheJboltsJatJthisJpoint.
STEP+3

ITEMJCODEJ674077
•AssembleJbolts(C),JlockJwashers(F)JandJflatJwashers(E)JthroughJeachJ
cornerJblockJofJtheJseat(2)JtoJtheJbackJframe(1).
•DoJnotJfullyJtightenJallJtheJboltsJatJthisJpoint.
STEP+4

ITEMJCODEJ 67407
8
ASSEMBLY+IS+COMPLETE
•CarefullyJturnJtheJchairJover,JandJputJtheJchairJonJtheJfloor.JTightenJ
eachJlooseJboltJaJlittleJatJaJtimeJwhileJmarkingJsureJtheJchairJremainJ
level.
•RepeatJuntilJallJlooseJboltsJareJtight.
STEP+5

9ITEMJCODEJJJ67407
CareJandJmaintenance
REGULAR CARE:
• Protect from direct sunlight
• Vacuum regularly using low suction
• Rotate reversible cushions regularly
CLEANING:
• Do not remove cushion covers for separate cleaning even though they may
have zippers
• Do not wash , Do not dry clean , Do not shampoo clean
• Clean with hot water extraction machine. Professional cleaning recommended
• Do not use dishwashing liquid or laundry detergent
• Use only upholstery detergents
• Do not wet filling
• Dry in shade away from direct heat and sunlight
• Allow to dry thoroughly before re-use
SPOT CLEANING:
• Do not rub
• Do not spot clean with any solvent
• Treat spills and stains as soon as possible
• Gently scrape off any soil or mop any liquid from the surface of the fabric
• Apply proprietary cleaning agents strictly according to instructions to remove
the residue of the spill
• Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
Apply only water-based soil resist (fabric protection) treatments. Do not use
aerosol products
* PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS NOT COVERED BY
WARRANTY
* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND TEAR AND
DOES NOT AFFECT THE DURABILITY OR FUNCTIONALITY OF THE
FABRIC AN D IS EASILY REMOVED
Do not:
· Use chair/stool as a ladder
· Climb on the chair/stool
· Stand on the foot-rest of the chair, as this could lead to the stool becoming
unbalanced and overturning