American DJ Fiesta User manual

User Instructions
American DJ
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
Introduction:
Thank you for purchasing the American DJ Fiesta.
™
Thank you for purchasing the American DJ Fiesta.
™
Thank you for purchasing the American DJ Fiesta.
To optimize the
performance of this product, please read these operating instructions
carefully to familiarize yourself with the basic operations of this unit. The
American DJ
®
Fiesta
® Fiesta®
™
is a party light for any occasion. This unit has a
gobo for almost any “Fiesta.” The unit is sound active and has three dif-
ferent operating modes (Sound Active, Continuos Rotation, and Static).
A gobo selector switch allows you to scroll through the gobo or stay on
a single one.
Customer Support:
American DJ
®
provides a toll free customer support line, to provide set
® provides a toll free customer support line, to provide set ®
up help and to answer any question should you encounter problems
during your set up or initial operation. You may also visit us on the web
at www.americandj.com for any comments or suggestions.
Service Hours are Monday through Friday 10:00 a.m. to 5:00 p.m.
Paci c Standard Time.
Voice:
[phone]
Fax:
[phone]
E-mail:
suppor[email protected]
Warning!
To prevent or reduce the risk of electrical shock or  re, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
your nearest American DJ dealer.
Do not discard the shipping cartoon in the trash. Please recycle when
ever possible.
HALOGEN LAMP WARNING!
This fixture is fitted with a halogen lamp which is highly susceptible
to damage if improperly handled. Never touch lamp with your bare
fingers as the oil from your hands will shorten lamp life. Also, never
move the fixture until the lamp has had ample time to cool. Remember,
lamps are not covered under warranty conditions.
Fiesta™ Introduction
©
American DJ Supply
®
- www.americandj.com - Fiesta™ Instruction Manual Page 2
® - www.americandj.com - Fiesta™ Instruction Manual Page 2®

General Operation:
This fixture is designed to operate as a stand alone unit. It has
been tested and lamped at the factory there is no assembly
necessary. The Fiesta™ is ready to be plugged in, out of the
box. There is no power switch, after plugging the unit if there is
no lamp output check the fuse and bulb. If the fuse and bulb are
good, please return the unit for servicing.
Operating Modes:
This unit comes with a 3-way operating switch located on the
rear of the unit. The switch controls three (3) different operating
modes; Static, Sound Active, and Continuous Rotation. When
the switch is in the "I" position the unit will react to a music
source, via its internal microphone. When the unit is in the "0"
position the fixture will act as a static gobo projector, the color
dish will not rotate. When the switch is in the "II" position the
unit's color wheel will rotate in a continuous pattern not reacting
to a sound source.
Gobo Change:
On the rear of the unit there is a gobo selector switch. The
switch has two functions. In one position the gobo wheel will
rotate in a continuous pattern. In the other position the gobo
wheel will lock in one position. Use this switch to lock you
desired gobo in position. When you desire a specific gobo,
place the switch in the continuous rotation position and wait
for your desired gobo to come around. When you desired gobo
comes around, flip the switch in the lock position. This will proj-
ect only your desired gobo.
Fiesta™ Operation
©
American DJ Supply
®
- www.americandj.com - Fiesta™ Instruction Manual Page 3
® - www.americandj.com - Fiesta™ Instruction Manual Page 3®
Trouble Shooting:
Listed below are a few common problems that you may
encounter, with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a standard
110V wall outlet.
2. Be sure the external fuse has not blown. The fuse is
located on the rear panel.
3. Remove the lamp cover and be sure the lamp is seated
in its socket properly. Occasionally lamps become loose
during shipping be sure the lamp is push in to its socket
all the way.
Unit does not respond to sound;
1. Be sure the unit's mode switch is in the "I" position, this is
the only mode that allows the unit to operate in sound
active mode.
2. Low frequencies (bass) should cause the unit to react to
sound. Tapping on the microphone, quiet or high
pitched sounds may not activate the unit.
Unit’s gobo do not change;
1. Be sure the unit's mode switch is in the "I" position, this is
the only mode that allows the unit to operate in sound
active mode.
2. Low frequencies (bass) should cause the unit to react to
sound. Tapping on the microphone, quiet or high
pitched sounds may not activate the unit.
Fiesta™ Trouble Shooting
©
American DJ Supply
®
- www.americandj.com - Fiesta™ Instruction Manual Page 4
® - www.americandj.com - Fiesta™ Instruction Manual Page 4®

Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the internal and
external optical lenses must be carried out periodically to opti-
mize light output.
1. Use normal glass cleaner and a soft cloth to wipe down
the outside casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft
cloth every 30-60 days.
5. Always be sure to dry all parts completely before
plugging the unit back in.
Cleaning frequency depends on the environment in which the
fixture operates (I.e. smoke, fog residue, dust, dew). In heavy
club use we recommend cleaning on a monthly basis. Periodic
cleaning will ensure longevity, and crisp output.
Lamp Replacement:
Disconnect from the main power supply. Remove the thumb
screw on the top of the unit that holds the lamp cover in
place. Remove the trap door. Carefully remove socket assem-
bly from the unit and discard the old lamp. Be sure the unit
has had ample time to cool before attempting to replace the
lamp. Carefully install the new lamp, be sure to follow all the
installation guide lines that are included with your new lamp.
Reassemble in reverse order. Replace the trap door and thumb
screw.
Caution:
Always replace with the exact same type lamp and
fuse, unless otherwise specified by an authorized American
DJ
®
technician.
Fiesta™ Gobo Options Fiesta™ Cleaning
©
American DJ Supply
®
- www.americandj.com - Fiesta™ Instruction Manual Page 6
® - www.americandj.com - Fiesta™ Instruction Manual Page 6®
©
American DJ Supply
®
- www.americandj.com - Fiesta™ Instruction Manual Page 5
® - www.americandj.com - Fiesta™ Instruction Manual Page 5®
The illustration below detail all the included gobo patterns.
Focusing:
On the top of the unit, loosen the thumb screw that holds the
lens in place. Grasp the thump screw with your hand and manu-
ally slide the lens back and forth until you achieve your desire
focus. When you achieve the proper focus retighten the thumb
screw.

©American DJ Supply
American DJ World Headquarters:
4295 Charter Street Los Angeles, CA 90058 USA
Tel: [phone] / Fax: [phone]
Web: www.americandj.com / E-mail: [email protected]
Technical Specifications:
Model: Fiesta™
Lamp:
ZB-ELC-3 24v/250w
Voltage:
110~120v
Dimensions:
9H x 11W x 12L
Colors
Multi-colored dichroic dish
Gobos:
9 plus Spot
Weight:
21Lbs
Fuse:
5Amp
Duty Cycle:
15min on/off
Fiesta™ Specifications
©
American DJ Supply
®
- www.americandj.com - Fiesta™ Instruction Manual Page 7
® - www.americandj.com - Fiesta™ Instruction Manual Page 7®
Please Note: Speci cations and improvements in the design of
this unit and this manual are subject to change without any prior
written notice.