American DJ VERTIGO User manual

SPECIFICATIONS: MODEL - Vertigo™
Weight: 19 lbs.
Size: 14” x 12” x 12”W
Lamp: 2 x ZB-64514 120V 300W
Fuse: 10A
Supply Voltage: 120V
Working Position: Any Safe position
Duty Cycle: 10 Minutes
Colors: Multiple Colored
VERTIGO™
American DJ ® User Instructions
Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 90058
CAUTION!
Read instructions before installing or
plugging unit in.
OPERATING INSTRUCTIONS:
Unit is ready to be hung or set on flat surface. Unit will react to bass sound of music via the internal
microphone. Be sure not to obstruct cooling vents and keep in a well ventilated area. Fog will give
the best results, fog or special effects smoke must be used in order to see the beams of light.
CAUTION: Front part of fixture will get extremely hot if operated for long periods. Please use a 5 min
on/5 min off duty cycle for best results. Let cool before handling unit.Caution! Never open unit when
in use. Always disconnect main power before serving or replacing lamp. Remember always replace
same lamp and fuses.
Lamp replacement: Remove top cover of unit. Remove and replace lamps with the same wattage
and voltage. For service contact American DJ. Toll Free: [phone]
Fax: [phone]
To purchase parts online visit http://parts.americandj.com
HALOGEN LAMP WARNING!
This fixture is fitted with halogen
lamps which are highly susceptible
to damage if improperly handled.
Never touch lamp with bare fin-
gers as the oil from your hands will
shorten lamp life. Also, never move
fixture until lamp has had ample
time to cool. Remember, lamps
are not covered under warranty
conditions.