American Standard Acrylux Acrylux 60"x 30" User manual

H126
© 2008 AS America Inc.
ACRYLUX™ 60" x 30"
TILE BATH WALL SET
HIGH GLOSS
ACRYLUX 60" x 30" TILE BATH WALL SET
❑ c Tile Bath Wall Set
Product Features:
• High-gloss acrylic-capped ABS with
berglass reinforcement
• Mounts directly to studs
• Caulk-less installation
- Integral rubber gasket between back and
side walls for a watertight seal
• Pin-and-slot design for easy alignment
of side and back panels
• Full width accessory shelves
• Simulated grout lines for the attractive look
of a textured tile wall
Individual wall panels also available:
❑ 0030Y1.BWT-R 30" Bath Wall Panel, Right
❑ 0030Y1.BWT-L 30" Bath Wall Panel, Left
❑ 6000Y1.BWT-B 60" Bath Wall Panel, Back
Nominal Dimensions:
Side Panels:
60" tall x 30" wide
(1524 x 762mm)
Back Panel:
60" tall x 60" wide
(1524 x 1524 mm)
For use with:
• 6030Y1 Series Bathtubs and Whirlpools
• 6030Y2A Series AFR Bathtubs and Whirlpools
Compliance Certications -
Meets or Exceeds the Following Specications:
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
STUD LAYOUT
31-1/2"
(800mm)
60"
(800mm)
= Stud Location
58" Door Opening
(1473mm)
Side
Panel
Back Panel
30"
(762mm)
60"
(800mm)
Revised 5/08