American Standard Robe Hook 6721 User manual

Certified to comply with ANSI A112.18.1
U.S. Patent No. D403,750
ROBE HOOK
TOWEL RING
TISSUE PAPER HOLDER
M968216C
6721
6729
6723
1ROBE HOOK, TOWEL RING and TISSUE PAPER HOLDER
MOUNTING & INSTALLATION
1
Install the WALL ESCUTCHEON (7) on the MOUNTING PLATE (5). Place the ROBE HOOK (1), TOWEL RING (2) and
TISSUE PAPER HOLDER (3) over the ESCUTCHEON (7). Secure with MOUNTING SCREW (8). Tighten fully.
Push INDEX BUTTON (9) into ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3). See illustration.
The ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3) work best if secured to a wall stud or cross brace within the wall,
using the SCREWS (3) supplied.
If the ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3) is to be installed on a tile or plaster wall the TILE ANCHORS (4)
or DRYWALL ANCHORS (6) and SCREWS (3) should be used.
Determine desired height and location (optional) and mark a center line. Using the MOUNTING PLATE (5) as a template mark the two
mounting holes. If MOUNTING PLATE (5) is secured to a stud or cross brace drill small pilot holes for SCREWS (3).
For installations on drywall, use DRYWALL ANCHORS (6) and SCREWS (3) for securing MOUNTING PLATE (5) to wall. Place #2 Phillips
screwdriver or cordless screwdriver into recess of anchor. Press into drywall while turning the anchor clockwise until it is seated flush
with the wall. Place MOUNTING PLATE (5) over DRYWALL ANCHORS (6) and insert SCREWS (3) with #2 Phillips screwdriver.
See illustration below. Secure MOUNTING PLATE (5) to wall with SCREWS (3).
5
4
3
7
8
8
9
9
9
8
FINISHED
WALL
3
2
Regular Screwdriver
Recommended Tools
Phillips Screwdriver
Drill
10'
Tape Measure
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR
WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID,
POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
STANDARD
COLLECTION
For installations on tiled walls, If TILE ANCHORS (4) and SCREWS (3) are used for securing MOUNTING PLATE (5), then drill
two 1/4" diameter holes a minimum of 1-1/4" deep. Insert the two TILE ANCHORS (4) flush with face of the finished wall.
Secure MOUNTING PLATE (5) to wall with SCREWS (3).
30 TO 72
INCHES FROM
FLOOR
USE MOUNTING PLATE
AS TEMPLATE
56
4
4
6
3
CENTER
LINE
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Installation
Instructions

M968216C
ACCESSORIES
ROBE HOOK
TOWEL RING
TISSUE PAPER HOLDER
STANDARD
COLLECTION
MODEL NUMBERS
6721
6729
6723
M962136-0070A
MOUNTING BRACKET
6721
ROBE HOOK
6729
TOWEL RING
6723
TISSUE PAPER HOLDER
M962136-0070A
MOUNTING BRACKET
M907736-YYY0A
ESCUTCHEON
M962137-YYY0A
TOWEL RING KIT
M907736-YYY0A
ESCUTCHEON
M907736-YYY0A
ESCUTCHEON
M962138-YYY0A
TISSUE PAPER HOLDER KIT
M962135-YYY0A
ROBE HOOK KIT
M962136-0070A
MOUNTING BRACKET
CHROME
SATIN
002
295
Replace the "YYY" with appropriate finish code
M962233-0070A
INDEX BUTTON
M962233-0070A
INDEX BUTTON
M962233-0070A
INDEX BUTTON
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1-800 442-1902
Weekdays 8:00 a.m. to 8:00 p.m. EST
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
Product names listed herein are trademarks of American Standard Inc.
© American Standard Inc. 2002