American Standard FloWise Showerhead 1660.715 User manual

M968976
Adjustable Wrench
RECOMMENDED TOOLS
1REMOVE SHOWER HEAD FROM HOUSING
1660.715
Certified to comply with ANSI A112.18.1
Thank you for selecting American-Standard...the benchmark of fine
quality for over 100 years.
To ensure that your installation proceeds smoothly--please read
these instructions carefully before you begin.
Installation
Instructions
FloWise™
SHOWERHEAD
1
1
2
Hold SHOWERHEAD (1) with one hand and HOUSING (2)
with the other as illustrated.
Rotate SHOWERHEAD (1) clockwise while holding HOUSING (2)
stationary. NOTE: The thread connection is a left hand
thread. Keep turning SHOWERHEAD (1) until it can be
removed from the HOUSING (2).
2INSTALL HOUSING
4
Slide HOUSING (2) onto SHOWER ARM (3).
3INSTALL SHOWER HEAD
TEFLON TAPE
Rap SHOWER ARM (3) threads with Teflon tape.
Tighten SHOWERHEAD (1) with an adjustable wrench.
Do not over tighten.
INSTALL HOUSING TO SHOWER HEAD
Install HOUSING (2) onto SHOWER HEAD (1). Thread
HOUSING (2) counter-clockwise to install onto SHOWER
HEAD (1). Hand tighten only.
1
3
3
2
2
HOW TO INSTALL SHOWER HEAD
TO SHOWER ARM