American Standard Cambridge 2460.028W User manual

CAMBRIDGE™ 5'
WHIRLPOOL AND BATHING POOL
AMERICAST®BRAND ENGINEERED MATERIAL
CAMBRIDGE 5' WHIRLPOOL AND BATHING POOL
❏2461.028W Whirlpool Featuring System I
Right Hand Drain Outlet
❏2460.028W Whirlpool Featuring System I
Left Hand Drain Outlet
• Americast®brand engineered material
• Acid-resistant porcelain finish
• Integral apron with integral 3-sided tile/water
retention flange
• Integral lumbar support with beveled headrest
• Full slip-resistant coverage
• 1.5 HP single speed, self-draining pump/motor
• Factory installed power cord and plug
• Six multi-directional and flow-adjustable jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater connection system
• Factory installed and tested whirlpool system
Whirlpool Massage featuring System I
❏2461.128W Whirlpool Featuring System I
Right Hand Drain Outlet with Grab Bar Drilling
❏2460.128W Whirlpool Featuring System I
Left Hand Drain Outlet with Grab Bar Drilling
• Same as above except with grab bar drilling
(grab bar must be ordered separately)
StayClean™ Whirlpool Massage featuring System I
❏2461.028WC Whirlpool Featuring System I
Right Hand Drain Outlet
❏2460.028WC Whirlpool Featuring System I
Left Hand Drain Outlet
• Same as 2460/2461.028W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®
StayClean™ Whirlpool Massage featuring System I
and Grab Bar Drilling
❏2461.128WC Whirlpool Featuring System I
Right Hand Drain Outlet with Grab Bar Drilling
❏2460.128WC Whirlpool Featuring System I
Left Hand Drain Outlet with Grab Bar Drilling
• Same as 2460/2461.028W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®and grab bar
drilling (grab bar must be ordered separately)
© 2006 American Standard Inc.
NOTE: Roughing-in dimensions shown on reverse side of page.
BV-37
Rev. 01/06
Bathing Pool:
❏2461.002 Bathing Pool Right Hand Drain Outlet
❏2460.002 Bathing Pool Left Hand Drain Outlet
Bathing Pool with Grab Bar Drilling:
❏2461.102 Bathing Pool Right Hand Drain Outlet
❏2460.102 Bathing Pool Left Hand Drain Outlet
Nominal Dimensions: 1524 x 813 x 451mm
(60" x 32" x 17-3/4")
Bathing Well Dimensions: 1372 x 660 x 432mm
(54" x 26" x 17")
Americast®brand engineered material is a
composition of porcelain bonded to enameling
grade metal, bonded to a patented structural
composite.
To Be Specified - Required:
❏Color:
❏Bath Faucet: (specify finish)
❏Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏Safe-T-Heater*: 9075.120
❏Bath Caddie: 9533.100 (in Chrome only)
❏Jet Trim Ring Kit: 9860.200-two per kit (specify finish)
for Body Massage Jets only
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
BARRIER FREE
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.
Install with seat at head end.

CAMBRIDGE™ 5'
WHIRLPOOL AND BATHING POOL
AMERICAST®BRAND ENGINEERED MATERIAL
© 2005 American Standard Inc.
1-1/2 N.P.T. THREADS
1-1/2 O.D. TAILPIECE
441mm
(17-3/8)
70mm
(2-3/4)
117mm
(4-5/8)
ROUGH
FLOOR
102mm
(4)
451mm
(17-3/4)
24mm
(15/16)
406mm
(16)
OPTIONAL
TO FLOOR
USUALLY
BETWEEN
1651 & 1981mm
(65 & 78)
711mm
(28)
C/L OF CURTAIN ROD
USUALLY 1930mm(76) FROM
FINISHED FLOOR
C/L OF
VALVES
102mm
(4)
102mm
(4)
SPOUT-
1/2 N.P.T.
FINISHED
WALL
SHOWER ARM- 1/2 N.P.T.
32mm(1-1/4) DIA. HOLE
SEE
NOTE
■
76mm
(3)
813mm
(32)
1524mm
(60)
19mm
(3/4)
70mm
(2-3/4)
203mm
(8) FINISHED
WALL
102mm
(4)
102mm
(4)
C/L OF 1/2
SUPPLIES
AS REQ'D
C/L OF
DRAIN
229mm x 305mm
(9 x 12)
FLOOR
CUTOUT
PUMP
406mm
(16)
PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS
ON / OFF
SWITCH
64mm
(2-1/2)
25mm
(1)
(2) 54mm(2-1/8)
DIA. HOLES
60mm 13mm
+
(2-3/8) (1/2)
+
SAFE-T-HEATER
REMOVABLE BLANK
C/L OF 1/2
SUPPLIES
AS REQ'D
(2) 54mm(2-1/8)
DIA. HOLES
60mm 13mm
+
(2-3/8) (1/2)
+
1-1/2 N.P.T. THREADS
1-1/2 O.D. TAILPIECE
441mm
(17-3/8)
70mm
(2-3/4)
117mm
(4-5/8)
ROUGH
FLOOR
102mm
(4)
451mm
(17-3/4)
24mm
(15/16)
406mm
(16)
OPTIONAL
TO FLOOR
USUALLY
BETWEEN
1651 & 1981mm
(65 & 78)
711mm
(28)
C/L OF CURTAIN ROD
USUALLY 1930mm(76) FROM
FINISHED FLOOR
C/L OF
VALVES
102mm
(4)
102mm
(4)
SPOUT-
1/2 N.P.T.
FINISHED
WALL
SHOWER ARM- 1/2 N.P.T.
32mm(1-1/4) DIA. HOLE
SEE
NOTE
■
76mm
(3)
813mm
(32)
1524mm
(60)
19mm
(3/4)
70mm
(2-3/4)
203mm
(8) FINISHED
WALL
102mm
(4)
102mm
(4)
C/L OF
DRAIN
229mm x 305mm
(9 x 12)
FLOOR
CUTOUT
406mm
(16)
64mm
(2-1/2)
25mm
(1)
Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.4
These measurements are subject to change or cancellation.
No responsibility is assumed for use of superseded or voided
leaflet.
IMPORTANT:
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH
WHIRLPOOL
FOR ADDITIONAL INFORMATION.
SHOWN WITH 8620. SERIES AMARILIS BATH/SHOWER FITTING
AND POP-UP C.D. & O.
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMEN-
SIONS (2461).
CONCEALED PIPING NOT FURNISHED.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUP-
PORTS.
■
NOTES:
GENERAL SPECIFICATIONS FOR 2460/2461 WHIRLPOOL
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP 1.6 HP, 9.7 AMPS,120V.
60 x 32 x 17-3/4 In. (1524 x 813 x 451mm)
190 Lbs. (86 Kg.)
607 Lbs. (273 Kg.)
50 Gal. (190 L)
39 Gal. (148 L)
41 x 20 In. (1041 x 508mm)
54 x 26 In. (1372 x 660mm)
14 In. (356mm)
46 Lbs./Sq.Ft. (220 Kgs./Sq.m)
13.9
30.9
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
GENERAL SPECIFICATIONS FOR 2460/2461 BATHING POOL
60 x 32 x 17-3/4 In. (1524 x 813 x 451mm)
161 Lbs. (72 Kg.)
578 Lbs. (260 Kg.)
50 Gal. (190 L)
41 x 20 In. (1041 x 508mm)
54 x 26 In. (1372 x 660mm)
14 In. (356mm)
43 Lbs./Sq.Ft. (208 Kgs./Sq.m)
13.9
30.9
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ASME A112.19.4M for Americast Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density