American Standard 1748 User manual

H63
© 2006 American Standard Inc.
COLONY™ 5-1/2' x 32" w/INTEGRAL APRON
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
Revised 5/06
COLONY™ 5-1/2' x 32" WHIRLPOOL AND
BATHING POOL with INTEGRAL APRON
❏1748.218 Whirlpool featuring System I,
Left Hand Outlet
❏1748.118 Whirlpool featuring System I,
Right Hand Outlet
• Acrylic with berglass reinforcement
• Integral apron with removable access panel
• Integral 3-sided tile/water retention ange
• Molded-in back rest
• Dual, molded in arm rests
• 1.0 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Six multi-directional and ow-adjustable jets
• Deck-mounted air switch On/Off
• Two air volume controls
• Factory installed and tested whirlpool system
EverClean™ Whirlpool Massage featuring System I
❏1748.218C Whirlpool featuring System I,
Left Hand Outlet
❏1748.118C Whirlpool featuring System I,
Right Hand Outlet
• Same as above except with the EverClean™
whirlpool system featuring Antimicrobial
AlphaSan®
❏1748.202 Bathing pool only, Left Hand Outlet
❏1748.102 Bathing pool only, Right Hand Outlet
Nominal Dimensions:
(66" x 32" x 19-1/2")
1676 x 813 x 495mm
Compliance Certications -
Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
To Be Specied - Required:
❏Color:
❏Bath Faucet: (specify nish)
❏Bath Drain: 1583.470 (specify nish)
To Be Specied - Optional:
❏Jet Trim Ring Kit: 9860.200-two per kit (specify nish)
for Body Massage Jets only
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.

H64
© 2006 American Standard Inc.
COLONY™ 5-1/2' x 32" w/INTEGRAL APRON
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
Revised 5/06
66” (1676mm)
WATER RETENTION
FLANGE (3 SIDES)
FINISHED
WALL
7-1/4” (184mm)
C/L OF DRAIN
3/4” (19mm)
15-1/2"
(394mm)
32”
(813mm)
1-1/2”
(38mm)
C/L OF
SUPPLIES
2-3/8 ± 1/2
(60 mm ± 13 mm)
C/L OF DRAIN
OUTLET
19-1/4
(489mm)
REF.
DIM
1" WATER
RETENTION
FLANGE
(3 SIDES)
19-1/2
(459mm)
1-1/2 O.D.TAILPIECE
BATH
SUPPORT
MATERIAL
ROUGH
FLOOR
FINISHED
WALL
TOP OF
DECK
3-1/4
(83mm)
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
65 & 78
(1651 & 1981mm)
C/L OF
OVERFLOW
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
SHOWER ARM
2-3/4
(70mm) 4-5/8
(117mm)
1-1/2 N.P.T.M.
THREADS
UNDERSIDE
OF DECK
ON/OFF SWITCH
PUMP
12
(305mm)
OPT. 4
(102mm)
LEVELING
STRINGER
NOT FOR
SUPPORT
TILING
FLANGE
66” (1676mm)
WATER RETENTION
FLANGE (3 SIDES)
FINISHED
WALL
7-1/4” (184mm)
C/L OF DRAIN
3/4” (19mm)
15-1/2"
(394mm)
32”
(813mm)
1-1/2”
(38mm)
C/L OF
SUPPLIES
2-3/8 ± 1/2
(60 mm ± 13 mm)
C/L OF DRAIN
OUTLET
19-1/4
(489mm)
REF.
DIM
1" WATER
RETENTION
FLANGE
(3 SIDES)
19-1/2
(459mm)
1-1/2 O.D.TAILPIECE
BATH
SUPPORT
MATERIAL
LEVELING
STRINGER
NOT FOR
SUPPORT
ROUGH
FLOOR
FINISHED
WALL
TOP OF
DECK
3-1/4
(83mm)
12
(305mm)
OPT.
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
65 & 78
(1651 & 1981mm)
C/L OF
OVERFLOW 4
(102 mm)
C/L OF
SPOUT
TILING
FLANGE
C/L OF
VALVES
C/L OF
SHOWER ARM
2-3/4
(70mm) 4-5/8
(117mm)
1-1/2 N.P.T.M.
THREADS
UNDERSIDE
OF DECK
66 x 32 x 19-1/2 In.(1676 x 813 x 495mm)
120 Lbs. (54 Kg.)
537 Lbs. (244 Kg.)
50 Gal. (189 L.)
46 Gal. (174 L.)
18 x 48 In. (457 x 1219mm)
26 x 59 In.(660 x 1499mm)
12-1/2 In. (318 mm)
37 Lbs./Sq. Ft. (179 Kgs/Sq. m.)
20.8
35.3
GENERAL SPECIFICATIONS FOR 1748 WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.1 HP, 9.9 AMPS, 120V.SYSTEM I PUMP
66 x 32 x 19-1/2 In.
(1676 x 813 x 495mm)
100 Lbs. (45 Kg.)
517 Lbs. (235 Kg.)
50 Gal. (189 L)
18 x 48 In. (457 x 1219mm)
26 X 59 In. (660 x 1499mm)
12-1/2 In. (318mm)
35 Lbs./Sq.Ft. (173 Kgs./Sq.m)
25.6
29.7
GENERAL SPECIFICATIONS FOR 1748 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
NOTES:
BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND
ENCLOSING MATERIAL BY OTHERS.
■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2776.118).
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and
A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.