American Standard Compact 3027.012 User manual

K65
© 2006 American Standard Inc.
COMPACT™ SPACE SAVING
ELONGATED TOILET
VITREOUS CHINA
Revised 5/05
COMPACT™ SPACE SAVING
ELONGATED TOILET
❑2149.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Exclusive space saving feature
• Elongated siphon action bowl
• Fits into same space as a conventional
round front toilet
• Fully glazed trapway
• Close-coupled tank
• Sanitary bar
• 2 bolt caps
• 100% factory ush tested
❑3027.012 Bowl
❑4010.012 Tank
Nominal Dimensions:
699 x 483 x 756mm
(27-1/2" x 19" x 29-3/4")
Fixture only, seat and supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
187mm
(7-3/4)
25mm ± 6mm
(1 ± 1/4)
16mm
(5/8)
381mm
(15)
470mm
(18-1/2)
248mm
(9-3/4) 235mm
(9-1/4)
165mm
(6-1/2)
305mm
(12)
699mm
(27-1/2)
C/L OF SEAT
POST HOLES
140mm (5-1/2)
CENTERS
FINISHED
FLOOR
83mm
(3-1/4)
FINISHED WALL
152mm
(6)
222mm
(8-3/4)
SUPPLY
AS
REQ'D
368mm
(14-1/2)
*
*
756mm
(29-3/4)
483mm
(19)
To Be Specied:
❏Seat: American Standard #5324.019 “Rise and
Shine" solid plastic closed front seat with cover.
❏Seat: American Standard #5311.012 “Laurel"
molded closed front seat with cover.
❏Alternate Seat:
❏Supply with stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.