American Standard Reliant + 2385.003 User manual

L69
© 2006 American Standard Inc.
RELIANT+
SINGLE CONTROL LAVATORY FAUCET
WITH 3/8" COPPER INLETS
MODEL NUMBER:
2385.000 Lavatory Faucet
Metal Lever Handle. Metal pop-up drain. 2.2gpm/8.3
L/min max. flow rate.
2385.003 Lavatory Faucet
Indexed Metal Lever Handle. Grid drain, less pop-up
hole. Vandal resistant 0.5gpm/1.9 L/min spray.
2385.004 Lavatory Faucet
Indexed Metal Lever Handle. Less drain, less hole.
2.2gpm/8.3 L/min max. flow rate.
2385.005 Lavatory Faucet
Metal Lever Handle. Less drain, with pop-up hole and
rod. 2.2gpm/8.3 L/min max. flow rate.
2385.006 Lavatory Faucet
Indexed Metal Lever Handle. Less drain, less pop-up
hole. Vandal resistant 0.5gpm/1.9 L/min spray.
GENERAL DESCRIPTION:
All metal body with choice of Metal Lever or Indexed Metal
Lever Handle. Washerless 47mm ceramic disc valve
cartridge. Equipped with a hot limit safety stop. 3/8" O.D.
copper inlet supplies. Choice of end device. Fitting mounts
on 4" centers.
2385.005 Shown.
PRODUCT FEATURES:
All Copper Waterway: Highest quality, faucet material for
durability & long life.
Ceramic Disc Valve Cartridge: Assures smooth, precise
valve control and a lifetime of drip-free, maintenance-free
performance.
Wide Comfort Zone: Gives more sensitive temperature
control.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
SUGGESTED SPECIFICATION
Single control lavatory fitting shall feature an all metal body with metal lever handle. Shall also feature a washerless ceramic
disc valve cartridge. Fitting shall be equipped with a hot limit safety stop. Fitting shall be American Standard Model #
2385.___.___.
114mm
(4-1/2)
154mm
(6-1/16)
114mm
(4-1/2)
98mm
(3-7/8)
49mm
(1-15/16)
133mm
(5-1/4)
56mm
(2-3/16)
56mm
2-3/16 102mm
(4)
32mm
(1-1/4)DIA.
MOUNTING
HOLE
121mm
(4-3/4)
4˚

L70
© 2006 American Standard Inc.
RELIANT+
SINGLE CONTROL LAVATORY FAUCET
WITH 3/8" COPPER INLETS
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
Product
Number Description
Lavatory Faucet. Metal Lever Handle. Metal pop-up drain.
3/8" O.D. copper inlets. 2.2gpm/8.3 L/min max. flow rate.
Finish Options
Lavatory Faucet. Indexed Metal Lever Handle.
Grid drain - less pop-up hole. Vandal resistant 0.5 gpm/ 1.9 L/min spray.
3/8" O.D. copper inlets.
Lavatory Faucet. Indexed Metal Lever Handle.
Less drain - less pop-up hole.
Vandal resistant 0.5 gpm/ 1.9 L/min spray. 3/8" O.D. copper inlets.
Lavatory Faucet. Indexed Metal Lever Handle.
Less pop-up drain - less pop-up hole.
2.2gpm/8.3 L/min max. flow rate.
Lavatory Faucet. Metal Lever Handle.
Less pop-up drain - with pop-up hole and pop-up rod.
2.2gpm/8.3 L/min max. flow rate. 3/8" O.D. copper inlets.
N/A = NOT AVAILABLE
2385.000
N/A
N/A
N/A
N/A
Polished
Chrome
002 299
PChrome
/PVD
Brass
mix
N/A
N/A
N/A
N/A
099
PVD
Polished
Brass
2385.003
2385.004
2385.005
2385.006