American Standard Right Height Elongated Toilet Triumph Cadet... User manual


Revised
© 2007 American Standard Inc.
TRIUMPHCADET®3
RIGHTHEIGHT™ELONGATEDTOILET
VITREOUSCHINA
TRIUMPHCADET®3
RIGHTHEIGHT™ELONGATEDTOILET
❑ 2492.016
• Vitreous china
• EverClean™ anti-microbial surface which
inhibits the growth of stain and odor causing
bacteria, mold, and mildew
• Low-consumption (6.0 Lpf/.6 gpf)
• 6-/2" rim height for accessible application
• Features the Cadet®3FlushingSystem
• Elongated siphon action jetted bowl
• Fully-glazed 2-/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with at tank cover for
superior storage
• Oversized 3" ush valve with chemical
resistant apper
• Chrome trip lever
• Speed Connect™ tank-to-bowl
coupling system
• Sanitary dam on bowl with four point
tank stabilization
• 2 color-matched bolt caps
• 00% factory ush tested
• 5 year warranty
❑ 3016.016 Right Height™ Elongated Bowl
❑ 4007.100 Tank
NominalDimensions:
768 x 472 x 784mm (30-/4" x 8-9/6" x 30-7/8")
Fixture only, seat and supply by others
AlternateTankCongurationsAvailable:
❑ 4007.500 Tank complete with Aquaguard Liner
ComplianceCertications-
MeetsorExceedstheFollowingSpecications:
• ASME A2.9.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specication for
Non-Adjustability
ToBeSpecied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: #5325.00 Elongated Champion® Slow Close
solid plastic seat and cover with easy lift off feature
❏ Seat: #5284.06 Elongated EverClean™
anti-microbial solid plastic seat and cover
❏ Seat: #53.02 Elongated Laurel molded wood
seat and cover
❏ Supply with stop:
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (2") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A2.9.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided page
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
SUPPLY
AS
REQ'D.
237mm
(9-5/16)
768mm
(30-1/4)
25mm ± 6mm
(1 ± 1/4)
102mm
(4)
464mm
(18-1/4)
472mm
(18-9/16)
784mm
(30-7/8)
419mm
(16-1/2)
*203mm
(8)
305mm
(12)
356mm
(14)
213mm
(8-3/8)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
*352mm
(13-7/8)
*152mm
(6)
238mm
(9-3/8)
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
08/07