American Standard Retrospect Collection Right Heigh Elongated Toilet... User manual

K48
© 2008 AS America Inc.
RETROSPECT® COLLECTION
RIGHT HEIGHT™ ELONGATED TOILET
VITREOUS CHINA
RETROSPECT® COLLECTION ELONGATED
RIGHT HEIGHT™ TOILET
❑ 2405.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Elongated siphon action jetted bowl with fully
glazed 2" trapway
• 16-3/4" rim height for accessible application
• AquaForce ushing technology
• Antique Chrome trip lever
• Sanitary bar on bowl
• 2 color matched bolt caps
• 100% factory ush tested
• Design coordinated to Retrospect
Collection Sinks
❑ 3264.216 Bowl
❑ 4393.016 Tank
Nominal Dimensions:
768 x 486 x 838mm
(30-1/4" x 19-1/8" x 33")
Fixture only, seat and supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimension
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages
*
*
494mm
(19-7/16")
C/L OF SEAT POST
MTG HOLES ON
140mm (5-1/2") CTRS
168mm (6-5/8")
389mm (15-5/16")
273mm
(11-5/8")
838mm
(33")
425mm
(16-3/4")
C/L OF SUPPLY
AS REQUIRED
FINISHED
FLOOR
13mm (1/2")
90mm
(3-9/16")
305mm
(12")
486mm
(19-1/8")
152mm (6")
203mm
(8")
C/L OF OUTLET AND
TOILET MTG BOLTS
768mm
(30-1/4")
214mm
(8-7/16")
25 ± 6mm (1 ± 1/4")
400mm
(15-3/4")
FINISHED WALL
C/L
To Be Specied:
❏ Color: ❏ White
❏ Seat: American Standard #5324.019 “Rise and
Shine” solid plastic closed front, elongated seat
with cover.
❏ Alternate Seat: American Standard #5311.012
“Laurel” molded closed front seat with cover.
❏ Supply with stop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Revised 2/08