American Standard VorMax Plus 708AA Series User manual

Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
OWNERS MANUAL
Image shown may vary from product purchased.
VorMax®Plus
Series 708AA
7302253-100 EN Rev. A
THANK YOU.
Getting the toilet completely clean is one of the nastiest jobs,
especially those dirty, hard-to-reach spots under the rim.That’s
why American Standard®and Lysol®have teamed up to bring
you the solution to effortless toilet bowl cleaning.
Introducing the self-cleaning toilet, VorMax®Plus.
The VorMax®Plus toilet features a self-cleaning system that
cleans with every ush. It uses the power of the VorMax®jetted
scrub and LYSOL®to keep the bowl clean continuously, ush
after ush.
At American Standard we continually work harder to raise
the standard of daily living by making it easier, safer and
more beautiful.
LYSOL®is used under license to American Standard. © 2017

pg2
TABLE OF CONTENTS
Inside The Box...........................................................................................................................................................page 3
Before You Start.........................................................................................................................................................page 3
Installation Video Information.....................................................................................................................................page 3
If Removing An Existing Toilet....................................................................................................................................page 3
Back-to-Back Installation...........................................................................................................................................page 4
Installation Instructions..............................................................................................................................................page 4
How It Works..............................................................................................................................................................page 9
VorMax Plus FreshInfuser™........................................................................................................................................page 9
Troubleshooting Guide for VorMax Plus FreshInfuser™.............................................................................................page 10
Troubleshooting Guide for VorMax®Plus Toilet.........................................................................................................page 10
Care and Cleaning...................................................................................................................................................page 10
Warranty...................................................................................................................................................................page 11

Before You Start:
Before installing your toilet, please see your product spec page to verify the dimensions and water supply
connections. Visit our website where you can search by Model number for the product spec page at:
http://www.americanstandard-us.com/
For Assistance Call Customer Care at: [phone]
pg3
Turn off water supply. Flush to remove water from tank;
sponge remaining water from
bowl before removing toilet.
Clean Flange
Inside The Box:
Wax Ring
Attachment Handle Nuts (3)
Nuts (2)
Bolt Caps (2) Bowl-To-Floor Knobs (2) T-Bolts with Retainer (2)
If Removing An Existing Toilet
!Caution: If leaving floor flange
open for more than 1-2 hours,
cover flange to prevent escaping
sewer gasses.
Water Supply Line
SOLD SEPARATELY
Installation video can be found at: http://www.americanstandard-us.com/vormaxtoilet
Washers (4)
Base Plate
Base Plate
Housing
VorMax Plus
FreshInfuser™
2 Packs
Rubber Grommets (2)
Toilet Seat
Long Bolts (2)

Flip the bowl upside down and press the wax ring down firmly.
1
Align the bowl and bolt
holes to set into place.
Apply weight evenly.
Do not move after
placement as water
tight seal may break.
TIP: Place a piece of masking
tape on the floor next to the
bolts on both sides to help
with alignment.
Install T-Bolts onto the flange
and screw the retaining nuts
to hold into place.
34
2
!
BOLT CAP
BOWL-TO-FLOOR
KNOBS
pg4
Hand tighten only.
Do not overtighten.
Installation Instructions:
Recommended fitting type for
back-to-back installations.
Depending upon your plumbing and venting conditions, the flow from
this toilet in a back-to-back installation may create a vacuum on the
system and draw water from the opposing bowl. The National
Standards Plumbing Code prohibits the use of a cross fitting for
drainage as throw over is possible. The code does approve a
directional "Y" style fitting with proper venting to direct the water
downward and away from the other toilet.
BACK-TO-BACK INSTALLATION
!
CAUTION :IF A VORMAX PLUS FRESHINFUSER IS NOT SECURELY INSERTED INTO THE SPUD OPENING , DO
NOT FLUSH THE TOILET AS THIS MAY RESULT IN WATER LEAKING FROM THE TOILET. TOILET MUST HAVE A
VORMAX PLUS FRESHINFUSER INSERTED IN THE SPUD OPENING AT ALL TIMES WHEN FLUSHING THE TOILET.
For further assistance please call Customer Care at: [phone]

pg5
Assembly of Housing Base Plate
Read carefully then remove CAUTION sticker (1) next
to spud (2) from rear of bowl.
3
2
1
Insert rubber grommets
(3) (narrow end rst) up
underneath the bowl and
into each seat mounting
hole. Ensure grommets
stay in place in bowl.
NOTES:
a) To ease installation, push
down on the top of the tank
while tightening the nuts.
b) Tighten all three nuts
adequately.
Using the provided handle,
tighten the nuts alternately
until the tank contacts the front
and back of the bowl achieving
china-to-china contact.
Confirm gaskets are fully seated on tank.
GASKETS
DO NOT REMOVE FACTORY
INSTALLED NUTS
!
56
2
1
Check that rubber gasket is rmly
attached to the underside of the
base plate (1) and place plate
over Spud (2) and rear of bowl
while aligning the two mounting
holes through the bowl.
8
7
IMPORTANT: Please do not connect the
water supply line until the last step
!
CAUTION :IF A VORMAX PLUS FRESHINFUSER IS NOT SECURELY INSERTED INTO THE SPUD OPENING , DO
NOT FLUSH THE TOILET AS THIS MAY RESULT IN WATER LEAKING FROM THE TOILET. TOILET MUST HAVE A
VORMAX PLUS FRESHINFUSER INSERTED IN THE SPUD OPENING AT ALL TIMES WHEN FLUSHING THE TOILET.
For further assistance please call Customer Care at: [phone]

pg6
911
From above, install mounting screws and washers (1) through
each hole, then place rubber washer (2) and plastic nut (3) from
underneath onto each bolt. Snug down but do not fully tighten.
Install VorMax Plus Housing (1)
onto VorMax Plus Base Plate (2),
snap in to secure.
Place seat onto the
protruding Base Plate
Posts and press in to “click”
into place, close seat and
cover and align seat with
bowl. Once aligned, further
tighten seat nuts under
bowl to securely hold seat
in position.
Remove seat by pressing both inside
buttons to release seat and cover:
Open Base Plate Housing Door (1). Observe the marked
notch on the VorMax Plus FreshInfuser (2). Observe the
same marked notch located on the Base Plate Housing.
Before installing, line up the marked notches on the Base
Plate Housing and the VorMax Plus FreshInfuser.
Insert the VorMax Plus FreshInfuser into the spud opening
aligning the marked notch on the VorMax Plus FreshInfuser
and the Base Plate Housing.
1
2
1
2
3
Seat Alignment
Open the seat and cover. Push both inside buttons
to release seat and cover. Pull the seat and cover
upwards to take it off the hinges.
2
Marked Notch on
VorMax Plus
FreshInfuser
Notch on Base
Plate Housing
Door
1
UNLOCKED
Marked Notch on
VorMax Plus
FreshInfuser
Notch on Base
Plate Housing
Door
2
10 12
!
CAUTION :IF A VORMAX PLUS FRESHINFUSER IS NOT SECURELY INSERTED INTO THE SPUD OPENING , DO
NOT FLUSH THE TOILET AS THIS MAY RESULT IN WATER LEAKING FROM THE TOILET. TOILET MUST HAVE A
VORMAX PLUS FRESHINFUSER INSERTED IN THE SPUD OPENING AT ALL TIMES WHEN FLUSHING THE TOILET.
For further assistance please call Customer Care at: [phone]

pg7
!
CAUTION :IF A VORMAX PLUS FRESHINFUSER IS NOT SECURELY INSERTED INTO THE SPUD OPENING , DO
NOT FLUSH THE TOILET AS THIS MAY RESULT IN WATER LEAKING FROM THE TOILET. TOILET MUST HAVE A
VORMAX PLUS FRESHINFUSER INSERTED IN THE SPUD OPENING AT ALL TIMES WHEN FLUSHING THE TOILET.
For further assistance please call Customer Care at: [phone]
Turn on water supply.
A
Connect water supply
line. (Sold separately)
Hand tighten nut.
B
Place seat back onto the
back plate posts and press
to “click” into place.
CAUTION : IF A VORMAX PLUS FRESHINFUSER IS NOT
SECURELY INSERTED INTO THE SPUD OPENING,
DO
NOT FLUSH THE TOILET
AS THIS MAY RESULT IN
WATER LEAKING FROM THE SPUD OPENING.
TOILET MUST HAVE A VORMAX PLUS FRESHINFUSER
INSERTED IN THE SPUD OPENING AT ALL TIMES
WHEN FLUSHING THE TOILET.
!
!
!
15
WARNING: Overtightening of water supply line nuts could result in breakage and potential flooding. If the
connection leaks after hand tightening, replace the supply line. If the connection continues to leak with
the new supply line, replace the fill valve. Do not use any type of sealant on the water supply connection.
Use of plumber’s putty, pipe dope, or any other type of sealant will void the warranty.
Clockwise
Direction
Clockwise
Direction
Locked Position
LOCKED
TURNING TO LOCK
Locked
Position
1
Turn VorMax Plus FreshInfuser (1) in a clockwise direction
(following arrow direction) until it stops at the “Lock” symbol
approximately 1/4 turn.
1
WARNING: Ensure that the VorMax Plus FreshInfuser is
correctly aligned when inserted. If it is not correctly aligned
water could leak from the opening.
!
14
13

pg8
Approximate
Water Level
Water Level Adjustment Knob
Overflow Tube
Trip Lever Rod
Float Cup
Adjust water level to level
indicated on tank by turning
water level adjustment knob
to move float cup up or down.
A
Prime the system by flushing the
product 5 times before use to
achieve optimal performance.
B
C
Fill Valve
Or Water
Control
Water Supply Line
Adjustable Screw
VERIFY ADJUSTABLE SCREW SETUP
1. Depress trip lever handle all the way (A).
2. Adjust screw on the teeter bar (B) so rear frame (C)
touches the frame stop (D).
3. Return trip lever handle (A) to rest position.
4. Make sure hook (E) is fully engaged under tab on
valve body (F), if not, slightly adjust screw to make
sure hook is engaged.
PROPER FLUSHING METHOD:
Be sure to fully depress the trip lever
on each flush. Do not hold the trip
lever down for extended periods of
time as this could allow air to enter
the system which will slightly degrade
performance for a few flushes.
(E) (F)
(C)
(D)
(B)
Hook
(A)
16
17
!
CAUTION :IF A VORMAX PLUS FRESHINFUSER IS NOT SECURELY INSERTED INTO THE SPUD OPENING , DO
NOT FLUSH THE TOILET AS THIS MAY RESULT IN WATER LEAKING FROM THE TOILET. TOILET MUST HAVE A
VORMAX PLUS FRESHINFUSER INSERTED IN THE SPUD OPENING AT ALL TIMES WHEN FLUSHING THE TOILET.
For further assistance please call Customer Care at: [phone]

pg9
VorMax®Plus technology infuses Lysol®cleaner into the water with
each ush, freshening the bowl day after day. Its powerful VorMax®
jetted scrub allows Lysol®cleaner to scrub the entire bowl, including
under the CleanCurve™Rim. The VorMax Plus FreshInfuser™is
hidden in a compartment and easy to access. Unlike competitive
products, there’s nothing unsightly hanging inside of the bowl. Each
VorMax Plus FreshInfuser™lasts 30 days and exudes an ocean fresh
scent. Daily use of the VorMax®Plus toilet offers continuous
freshness, ush after ush.
• Two VorMax Plus FreshInfuser™packs included
with the purchase of your toilet
• Each VorMax Plus FreshInfuser™pack freshens
up to *30 days (about 360 ushes).
• Ocean Fresh Scent
• VorMax Plus FreshInfuser™packs available for
purchase online at:
https://www.americanstandard.com/VorMaxPlus
or at participating supply houses and retailers.
HOW IT WORKS
VorMax Plus
FreshInfuser
™
LYSOL® is used under license to American Standard. © 2017
*Based on a usage of 12 flushes per day.

pg10
Care and Cleaning
When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth.
WARNING: Do not use in-tank cleaners. These products can seriously corrode fittings in the tank. This damage can cause leakage and
property damage. American Standard shall not be responsible or liable for any damage caused by the use of in-tank cleaners.
Troubleshooting Guide for VorMax®Plus Toilet
Problem Possible Cause Corrective Action
a. Open valve and allow water to fill tank.
b. Shut off water supply, disconnect supply line and inspect all gaskets and washers. Reassemble.
c. Readjust chain length as required.
d. Shut off water supply. Remove cap and clean as per Fluidmaster maintenance instructions at:
www.americanstandard-us.com/enews/fluidmasterguide.pdf
a. Check that refill tube is connected to water control and inserted into overflow tube without being
kinked or damaged.
b. Open supply valve fully. Be sure that proper supply tube size is used.
c. Remove obstruction. Consult a plumber if necessary.
d. Normal supply pressure must be at least 20 psi.
e. Tighten bolts as shown in Step 6 to make sure the tank is touching the piers of the bowl in the
front and back of the product.
f. Re-prime bowl by ushing 5 times in a row allowing the tank to rell each time to achieve
optimal performance.
g. Check water level in tank to make sure it is at the correct height listed inside the tank. Re-prime
bowl by ushing 5 times in a row allowing the tank to rell each time to achieve optimal performance.
h. Adjust settings according to adjustable screw setup in Step 17.
i. Reseat tank by shutting off water supply, disconnect supply line, remove tank mounting nuts,
inspect all gaskets and reassemble
j. Adjust trip lever nut by loosening the nut a quarter turn at a time clockwise (reverse thread)
k. Do not depress trip lever longer than 2 seconds for optimal performance. Depressing trip lever
longer will negatively affect the toilet performance by causing a loss of prime. Re-prime bowl by
ushing 5 times in a row allowing the tank to rell each time to achieve optimal performance.
a. Review Step 15 of installation procedure.
b. Review Step 1 through 6 of installation procedure.
c. Send new bowl / return
d. Tighten nuts, reinstall
e. Tighten nuts, reinstall
f. Replace gaskets
g. Clean debris from seal surface. Replace flapper seal as needed and adjust settings according
to adjustable screw setup in Step 17.
h. Clean debris from seal surface. Replace flapper seal as needed and adjust settings according
to adjustable screw setup in Step 17.
a. Clean debris from seal surface. Replace flapper seal as needed. See web for more info.
b. Shut off water supply. Remove cap and clean as per Fluidmaster maintenance instructions at:
www.americanstandard-us.com/enews/fluidmasterguide.pdf
c. Adjust settings according to adjustable screw setup in Step 17.
a. Retighten bowl-to-floor knobs.
b. Use toilet shims and /or place a bead of caulk around the base of the toilet.
a. Water supply valve closed.
b. Supply line blocked.
c.
Flush valve chain too loose or disconnected.
d. Sand or debris lodged in water control.
a. Bowl water level too low.
b. Supply valve partly closed.
c. Partially clogged trapway and/or drain
pipe and/or vent.
d. Supply pressure too low.
e. Tank not installed tightly on bowl.
f. Product has air stuck in waterways.
g. Incorrect tank water level
h. Trip lever not opening jet flapper to stop
i. Air leak
j. Trip lever not returning to original position
k. Loss of prime due to depressing on the
trip lever too long
a. Poor supply line connection.
b. Poor bowl to tank/floor connection.
c. Cracked Bowl
d. Loose tank nuts
e. Loose flush valve mounting nuts
f. Tank to Bowl gaskets defective
g. Black rim apper leaking. Inlet valve will
periodically run and you will see water
coming from port in to the bowl
h. Red jet apper leaking. Inlet valve will
periodically run
a. Flapper seal leaking or deformed.
b. Sand or debris lodged in water control.
c. Flush valve chain too tight, holding
flapper open.
a. Wax ring not fully compressed.
b. Floor not level.
Does not
flush
Poor or
sluggish
flush
Toilet leaks
Toilet does
not shut off
Toilet bowl
rocks after
installation
See Step 16-17 For Diagram
Problem Possible Cause Corrective Action
Water leaks around
VorMax Plus
FreshInfuser
a. VorMax Plus FreshInfuser not inserted into Spud correctly
b. Rubber gasket around VorMax Plus FreshInfuser is
damaged or missing
c. No FreshInfuser inserted in spud
a. Remove VorMax Plus FreshInfuser and reinsert.
Reference steps 12 and 13
b. Replace VorMax Plus FreshInfuser
c. Insert VorMax Plus FreshInfuser
Bowl not as clean
as it should be a. VorMax Plus FreshInfuser cleaner pack is empty a. Replace VorMax Plus FreshInfuser
Troubleshooting Guide for VorMax Plus FreshInfuser™

pg11
PLEASE COMPLETE AMERICAN STANDARD WARRANTY REGISTRATION PROCESS AND SAVE THIS WARRANTY INFORMATION
IMPORTANT: Registration of the toilet must be completed for this warranty to become effective.Your registration will make
it easier to contact you in the event of a product recall.*
THIS WARRANTY IS NOT TRANSFERABLE FROM ORIGINAL CONSUMER PURCHASER.
Warranty
TOILET LIMITED WORRY-FREE WARRANTY
This toilet comes with a limited lifetime warranty on chinaware, a limited 10 year warranty on all mechanical parts of the toilet, and
a limited 1 year warranty on the toilet seat if included with product. If inspection of this AS America, Inc. (“American Standard”)
plumbing product, inclusive of the chinaware and all mechanical parts, confirms that it is defective in materials or workmanship, American
Standard will repair or, at its option, exchange the product for the same or a similar model.

This limited warranty applies only to the original non-commercial purchaser and installation of the products. In the event of a limited
warranty claim, proof of purchase will be required – save sales receipts.

For this warranty to become effective, the warranty registration process must be completed via the internet or telephone per the warranty
registration instructions.

This limited warranty does not apply to commercial installations.The warranty for commercial installations is 10 years on chinaware and
mechanical parts, and 1 year on the toilet seat if included with product.

This warranty does not apply to local building code compliance.Since local building codes vary considerably, the purchaser of the product
should check with a local building or plumbing contractor to ensure local code compliance before installation.

This warranty will be void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance,
abuse, misuse, accident or other damage; if it was not installed in accordance with American Standard’s instructions; or if it has been
modified in a manner inconsistent with the product as shipped by American Standard.

WARNING: This warranty DOES NOT COVER any damages caused by the use of in-tank cleaners. These products can seriously corrode
the fittings in the tank.This damage can cause leakage and property damage. American Standard will not be responsible or liable for
any damage caused by the use of in-tank cleaners.

American Standard’s option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or
installation including any costs of any surrounding material such as tile or marble.American Standard is not responsible for any other
incidental or consequential damages attributed to a product defect or to the repair or exchange of a defective product, all of
which are expressly excluded from this warranty.(Some states or provinces do not allow the exclusion or limitation of implied warran-
ties, so this exclusion may not apply to you.)

This warranty gives you specific rights.You may have other statutory rights that may vary from state to state or province to province, in
which case this warranty does not affect such statutory rights.
7301638-100 EN/SP Rev. B
INSTRUCTIONS: Register your toilet at www.americanstandard.com. Please save your proof of purchase (sale receipt).
If you need assistance or do not have access to our website, please contact American Standard Customer Care at:
[phone]. An American Standard representative will assist in completing the warranty registration.
* In California, your warranty rights remain intact even if you do not complete the registration process.
In the United States:
American Standard Brands
1 Centennial Ave
Piscataway, New Jersey 08854
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling the
following toll free number: [phone]
www.americanstandard.com
In Canada:
AS Canada, ULC
5900 Avebury Rd.
Mississauga, Ontario
Canada L5R 3M3
Toll Free: [phone]
www.americanstandard.ca
In Mexico:
American Standard B&K Mexico
S. de R.L. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
Toll Free: 01-800-839-1200
www.americanstandard.com.mx

pg12
Notes:
pg12

Los nombres de producto mencionados en este documento son marcas de comercio de AS America, Inc.
© AS America, Inc. 2017
MANUAL DEL PROPIETARIO
La imagen puede diferir del producto comprado.
VorMax®Plus
Series 708AA
7302253-100 SP Rev. A
GRACIAS.
Limpiar a fondo el inodoro es uno de las tareas más
asquerosas, en especial esos lugares sucios y difíciles de
limpiar debajo del borde. Por eso American Standard®y
Lysol®se unieron para traerle la solución para la limpieza
sin esfuerzo de la taza del inodoro.
Presentamos el inodoro autolimpiante, VorMax®Plus. El
inodoro VorMax®Plus presenta un sistema autolimpiante
que limpia con cada descarga. Usa el poder del fregado por
chorro Vormax®y de LYSOL®para mantener la taza limpia
continuamente, descarga tras descarga.
En American Standard continuamente trabajamos más
para elevar la norma de la vida cotidiana haciéndola más
fácil, segura y hermosa.
LYSOL®se usa bajo licencia para American Standard. © 2017

pág. 2
TABLA DE CONTENIDO
Dentro de la caja.....................................................................................................................................................página 3
Antes de empezar...................................................................................................................................................página 3
Información del video de la instalación....................................................................................................................página 3
Si debe retirar un inodoro viejo................................................................................................................................página 3
Instalación en oposición..........................................................................................................................................página 4
Instrucciones de instalación....................................................................................................................................página 4
Cómo funciona........................................................................................................................................................página 9
VorMax Plus FreshInfuser.......................................................................................................................................página 9
Guía de resolución de problemas del FreshInfuser VorMax Plus...........................................................................página 10
Guía de resolución de problemas del inodoro VorMax®Plus.................................................................................página 10
Cuidado y limpieza................................................................................................................................................página 10
Garantía................................................................................................................................................................página 11

Antes de empezar:
Antes de instalar su inodoro, consulte la página de especicaciones del producto para vericar las
dimensiones y las conexiones del suministro de agua. Visite nuestro sitio web para buscar por número
de modelo la página de especicaciones del producto:
http://www.americanstandard-us.com/
Para asistencia, llame a Atención al Cliente al: [phone].
pág. 3
Apague el suministro
de agua.
Descargue para retirar el agua del tanque;
quite el agua que queda en la taza usando
una esponja antes de retirar el inodoro.
Limpiar brida
Dentro de la caja:
Anillo de cera
Manija de fijación Tuercas (3)
Nuts (2)
Tapas de pernos (2) Perillas de la taza
al piso (2) Tornillos T con
sujetador (2)
Para retirar un inodoro viejo:
!Precaución: Si deja la brida del
piso abierta durante más de
1-2 horas, cúbrala para evitar
escapes de gases de desagüe.
Línea de suministro de agua
SE VENDE POR SEPARADO
Mire el video de la instalación en: http://www.americanstandard-us.com/vormaxtoilet
Arandelas (4)
Placa de base
Armazón de la
placa de base
2 paquetes de VorMax
Plus FreshInfuser™
Arandelas aislantes
de hule (2)
Asiento de inodoro
Pernos largos (2)

Dé vuelta la taza y presione firmemente el anillo de cera
hacia abajo.
1
Alinee la taza y los
orificios de los tornillos
para ubicarlo en su
lugar. Aplique peso de
manera uniforme.
No mueva después de
la ubicación, ya que
puede romperse el
sellado hermético.
CONSEJO: Coloque un trozo
de cinta protectora en el piso
junto a los tornillos en ambos
lados para favorecer la
alineación.
Instale los tornillos T en la
brida y atornille las tuercas
de retención para
sostenerlos en su lugar.
34
2
!
TAPA DE PERNO
PERILLAS DE LA
TAZA AL PISO (2)
pág. 4
Ajuste a mano
únicamente.
No ajuste en exceso.
Instrucciones de instalación:
Tipo de conexión recomendada para
las instalaciones en oposición.
Según las condiciones de plomería y ventilación, el flujo de este
inodoro en una instalación en oposición puede crear un vacío en el
sistema y atraer agua de la otra taza. El Código de Normas
Nacionales de Plomería (National Standards Plumbing Code)
prohíbe el uso de una conexión en cruz para el desagüe por la
posibilidad de rechazo. El código aprueba el uso de una conexión
direccional en “Y” con la ventilación adecuada para dirigir el agua
hacia abajo y lejos del otro inodoro.
INSTALACIÓN EN OPOSICIÓN
!
PRECAUCIÓN :SI UN VORMAX PLUS FRESHINFUSER NO ESTÁ BIEN INSERTADO EN LA ABERTURA DEL SPUD , NO
DESCARGUE EL INODORO , YA QUE PUEDE CAUSAR UNA FUGA DE AGUA DESDE EL INODORO.EL INODORO DEBE
TENER UN VORMAX PLUS FRESHINFUSER INSERTADO EN LA ABERTURA DEL SPUD EN TODO MOMENTO CUANDO SE
DESCARGA EL INODORO.
Si necesita más asistencia, llame a Atención al Cliente al: [phone].

pág. 5
Ensamblado del armazón de la placa de base
Lea cuidadosamente y luego retire la calcomanía de
PRECAUCIÓN (1) ubicada junto al spud (2) de la parte
posterior de la taza.
3
2
1
Inserte las arandelas
aislantes de hule (3) (primero
el extremo angosto) debajo
de la taza y en cada orificio
de montaje del asiento.
Verifique que las arandelas
aislantes permanezcan en
su lugar en la taza.
NOTAS:
a) Para facilitar la instalación,
presione hacia abajo la
parte superior del tanque
mientras ajusta las tuercas.
b) Ajuste las tres tuercas
como corresponde.
Use la manija suministrada y
ajuste las tuercas alternadamente
hasta que el tanque entre en
contacto con la parte delantera y
posterior de la taza, logrando un
contacto entre cerámicas.
Confirme que las juntas estén bien apoyadas en el tanque.
JUNTAS
¡NO RETIRE LAS TUERCAS
INSTALADAS DE FÁBRICA!
!
56
2
1
Verifique que las arandelas aislantes
de hule estén bien sujetas a la parte
inferior de la placa de base (1) y
coloque la placa sobre el spud (2) y
la parte posterior de la taza y alinee
los dos orificios de montaje a través
de la taza.
8
7
IMPORTANTE: No conecte el suministro
de agua hasta el último paso.
!
PRECAUCIÓN :SI UN VORMAX PLUS FRESHINFUSER NO ESTÁ BIEN INSERTADO EN LA ABERTURA DEL SPUD , NO
DESCARGUE EL INODORO , YA QUE PUEDE CAUSAR UNA FUGA DE AGUA DESDE EL INODORO.EL INODORO DEBE
TENER UN VORMAX PLUS FRESHINFUSER INSERTADO EN LA ABERTURA DEL SPUD EN TODO MOMENTO CUANDO SE
DESCARGA EL INODORO.
Si necesita más asistencia, llame a Atención al Cliente al: [phone].

pág. 6
911
Desde arriba, instale las arandelas y los tornillos de montaje (1) a
través de cada orificio, luego coloque la arandela de hule (2) y la
tuerca plástica (3) desde la parte inferior de cada perno.Ajuste
hacia abajo, pero no ajuste del todo.
Instale el armazón VorMax Plus (1)
en la placa de base VorMax Plus
(2), encájelo para fijarlo en su lugar.
Coloque el asiento en los
postes sobresalientes de la
placa de base y presione para
que encaje en su lugar, baje el
asiento y la tapa y alinee el
asiento con la taza. Una vez
que lo haya alineado, ajuste
más las tuercas del asiento
debajo de la taza para
mantener el asiento seguro
en su posición.
Retire el asiento presionando los dos botones
interiores para liberar el asiento y la tapa:
Abra la puerta del armazón de la placa de base (1). Observe la
marca de punzón en el VorMax Plus FreshInfuser (2). Observe
la misma marca de punzón localizada en el armazón de la placa
de base.
Antes de realizar la instalación, alinee las marcas de punzón en
el armazón de la placa de base y el VorMax Plus FreshInfuser.
Inserte el VorMax Plus FreshInfuser en la abertura del spud
alineando la marca del punzón en el VorMax Plus FreshInfuser
con la del armazón de la placa de base.
1
2
1
2
3
Alineamiento
del asiento
Abra el asiento y la tapa. Presione ambos botones
internos para liberar el asiento y la tapa. Jale el asiento
y la tapa hacia arriba para retirarlos de las bisagras.
2
Marca de punzón
en el VorMax
Plus FreshInfuser
Marca de punzón
en la puerta del
armazón de la
placa de base
1
DESTRABADO
Marca de punzón
en el VorMax
Plus FreshInfuser
Marca de punzón
en la puerta del
armazón de la
placa de base
2
10 12
!
PRECAUCIÓN :SI UN VORMAX PLUS FRESHINFUSER NO ESTÁ BIEN INSERTADO EN LA ABERTURA DEL SPUD , NO
DESCARGUE EL INODORO , YA QUE PUEDE CAUSAR UNA FUGA DE AGUA DESDE EL INODORO.EL INODORO DEBE
TENER UN VORMAX PLUS FRESHINFUSER INSERTADO EN LA ABERTURA DEL SPUD EN TODO MOMENTO CUANDO SE
DESCARGA EL INODORO.
Si necesita más asistencia, llame a Atención al Cliente al: [phone].

pág. 7
!
Abra el suministro
de agua.
A
Conecte la línea del
suministro de agua.
(Se vende por separado)
Ajuste la tuerca a mano.
B
Vuelva a colocar el asiento
en los postes posteriores
de la placa y presione para
encajarlo en su lugar.
PRECAUCIÓN :SI UN VORMAX PLUS FRESHINFUSER NO
ESTÁ BIEN INSERTADO EN LA ABERTURA DEL SPUD,
NO
DESCARGUE EL INODORO,
YA QUE PUEDE CAUSAR
UNA FUGA DE AGUA DESDE LA ABERTURA DEL SPUD.
EL INODORO DEBE TENER UN VORMAX PLUS
FRESHINFUSER INSERTADO EN LA ABERTURA DEL SPUD
EN TODO MOMENTO CUANDO SE DESCARGA EL INODORO.
!
!
!
15
ADVERTENCIA: Si ajusta en exceso las tuercas de la línea del suministro de agua, podría haber roturas e
inundación potencial. Si la conexión tiene fugas después de ajustar a mano, reemplace la línea de suministro.
Si la conexión sigue goteando con la nueva línea de suministro, reemplace la válvula de llenado. No use
ningún tipo de sellador en la conexión del suministro de agua. El uso de masilla de plomero, grasa para tubería
o cualquier otro tipo de sellador anulará la garantía.
Sentido
horario
Sentido
horario
Posición trabada
TRABADO
GIRAR PARA TRABAR
Posición
trabada
1
Gire el VorMax Plus FreshInfuser (1) en sentido horario
(en la dirección de la flecha) hasta que se detenga en el
símbolo para trabar (“Lock”) aproximadamente 1/4 de giro.
1
ADVERTENCIA: Asegúrese de que el VorMax Plus
FreshInfuser esté bien alineado cuando lo inserta. Si no
lo está, podría haber fugas de agua en la abertura.
!
14
13
PRECAUCIÓN :SI UN VORMAX PLUS FRESHINFUSER NO ESTÁ BIEN INSERTADO EN LA ABERTURA DEL SPUD , NO
DESCARGUE EL INODORO , YA QUE PUEDE CAUSAR UNA FUGA DE AGUA DESDE EL INODORO.EL INODORO DEBE
TENER UN VORMAX PLUS FRESHINFUSER INSERTADO EN LA ABERTURA DEL SPUD EN TODO MOMENTO CUANDO SE
DESCARGA EL INODORO.
Si necesita más asistencia, llame a Atención al Cliente al: [phone].

pág. 8
Nivel de agua
aproximado
Perilla de ajuste del nivel de agua
Tubo de rebosadero
Varilla de la palanca de disparo
Flotador
Ajuste el nivel del agua hasta donde
se indica en el tanque girando la
perilla de ajuste del nivel del agua
para mover el flotador hacia arriba
o hacia abajo.
A
Prepare el sistema descargando el
producto 5 veces antes de usarlo
para lograr un rendimiento óptimo.
B
C
Válvula de
llenado o
control
del agua
Línea de
suministro
de agua
Tornillo ajustable
VERIFICAR LA CONFIGURACIÓN DEL
TORNILLO AJUSTABLE
1. Presione al máximo la manija de la palanca de
disparo (A).
2. Ajuste el tornillo (B) en la barra oscilante de manera
que el marco trasero (C) toque la retención del
marco (D).
3. Regrese la manija de la palanca de disparo (A) a la
posición de descanso.
4. Asegúrese de que el gancho (E) esté totalmente
enganchado debajo de la lengüeta en el cuerpo de
la válvula (F). De no ser así, ajuste apenas el tornillo
para conectar el gancho.
MÉTODO CORRECTO DE DESCARGA:
Presione completamente la palanca
disparadora en cada descarga. No
sostenga la palanca disparadora hacia
abajo durante períodos prolongados, ya
que podría entrar aire en el sistema y así
degradar levemente el rendimiento
durante algunas descargas.
(E) (F)
(C)
(D)
(B)
Gancho
(A)
16
17
!
PRECAUCIÓN :SI UN VORMAX PLUS FRESHINFUSER NO ESTÁ BIEN INSERTADO EN LA ABERTURA DEL SPUD , NO
DESCARGUE EL INODORO , YA QUE PUEDE CAUSAR UNA FUGA DE AGUA DESDE EL INODORO.EL INODORO DEBE
TENER UN VORMAX PLUS FRESHINFUSER INSERTADO EN LA ABERTURA DEL SPUD EN TODO MOMENTO CUANDO SE
DESCARGA EL INODORO.
Si necesita más asistencia, llame a Atención al Cliente al: [phone].