Amerihome BSBNLSET User manual

BSBNLSET / BSGYFSET
Bar Stool Assembly Instructions
Max Weight Capacity 330 Lb
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.amerihomebrand.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE
WARRANTY FOR FUTURE REFERENCE
Remove Black Cap
Discard Before Assembly
ATTENTION!
Seat
Foot Rest
Support
Cylinder
Handle
Base

A Black Cap protects the
hydraulic mechanism on
the Support Cylinder.
Remove the Black Cap and
discard it before assembly.
The Orange hydraulic
button will become visible.
Press the Seat onto
the narrow end of
Support Cylinder.
Place the wide end of
the Support Cylinder
into the center hole.
Press the Support
Cylinder down firmly
into the center hole.
and press down
FIRMLY.
ASSEMBLY INSTRUCTION 201604
To raise and lower the Seat, grasp the Handle and pull upward without applying any weight on the
Seat. To lower, grasp the Handle and pull upward while sitting on the Seat.
To disassemble, turn the stool upside down,
and hit the clip on the center of the bottom of
the base with a rubber mallet to disengage the
locking mechanism. Then, turn the stool right
side up, and lift the Seat upward, pulling the
Seat Assembly off of the Support Cylinder.
Use an allen wrench to
attach the Seat Plate to the
underside of the Seat with
the provided bolts.
Metal Clip