Amerihome HCDTSET User manual

HCDTSET
Chair Assembly Instructions
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation &maintenance. Every effort has been
made toensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT ACONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions orneed parts forthis product, visit our website
http://www.amerihomebrand.com or call Customer Service at 1-636-532-9888, Monday-Friday,
8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP THIS MANUAL, SALES RECEIPT &APPLICABLE WARRANTY FOR FUTURE REFERENCE
The chair seat has been shipped in protective
packaging.
Please use aPhilips screwdriver and attach the 4
screws, as indicated in the images above.
There are no pre-drilled holes. Self-tapping wood
screws are included.
201811

1) Lay tabletop on soft at surface to prevent scratches.
Position the bench so the bottom surface is visible.
2) Place one set of legs at end of tabletop. Secure
each side with 4 hex bolts per tabletop.
3) Position the remaining leg at opposite end. Secure
each side with 4 hex bolts per leg.
4) Securely tighten all hex bolts. Rotate tabletop.
COMPONENTS
#1) TOP 1 PIECE
#2) LEGS 2 PIECES
#3) HEX KEY 1 PIECE
#4) HEX BOLTS 16 PIECES
Call Customer Service 888-287-6981 if parts are missing. Do not exceed maximum weight capacity
IITEM # HCDTSET
TABLE ASSEMBLY
Identify all components before assembly. Do not tighten hex bolts
until table has been completely assembled. Do not overtighten.
PAGE 1 OF 2
WEIGHT CAPACITY
Table = 330 lbs
Chair = 330 lbs