Amerihome BS199GSET User manual

BS199GSET/BS199BLKSET/BS199WSET
Bar Stool Assembly Instructions
Max Weight Capacity 330 Lb
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
QUESTIONS? CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.amerihomebrand.com or call Customer Service at 1-636-532-9888, Monday-Friday,
8 AM - 4 PM Central Time, or email : [email protected]. A copy of the sales receipt is required.
KEEP MANUAL, SALES RECEIPT & WARRANTY FOR FUTURE REFERENCE.
Remove Black Cap
Discard Before Assembly
ATTENTION!
Base
(B)
Handle
Support
Cylinder (C)
Seat (A)
Support
Cylinder (D)

ASSEMBLY INSTRUCTION
1. Use the hex key (F) to attach the Support
Cylinder (C) to the underside of the Seat (A)
with the provided hex bolts (E).
2. Locate Black Cap on Support Cylinder.
3A. A Black Cap protects the hydraulic
mechanism on the Support Cylinder (D).
3B. Remove the Black Cap and discard it
before assembly. The Orange hydraulic
button will become visible.
4. Insert the Support Cylinder (D) into the
Support Cylinder (C) and press firmly.
5Insert the thicker end of the Support
Cylinder into the center hole of the Base,
and press down FIRMLY.
(To raise the seat, grasp the Handle and pull
upward without applying any weight. To lower,
raise the handle upward and apply weight to the
seat.)
DISASSEMBLY INSTRUCTIONS
Turn the stool upside down. Hit the Metal Clip
several times located in the exact center of the
bottom of the Base with a rubber mallet to
disengage the locking mechanism. The Base will
separate from the Seat Top and Support Cylinder.
To remove the Seat Top from the Support Cylinder, turn the stool upside
down, and strike the edge of the Support Cylinder several times where it
meets the support. The Support Cylinder and Base Plate and Leg will
separate with applied force.
1
5
3A
3B
Metal Clip
3
4
201911
1
Assembled
Bar Stool