Amerihome BS2304 User manual

BS2304 / BS2304C
Bar Stool Assembly Instructions
Max Weight Capacity 330 Lb 201307
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.amerihomebrand.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE
WARRANTY FOR FUTURE REFERENCE.
Seat
Foot
Rest
Foot Cap
Support Cylinder
Seat Plate
Screws
Handle
Remove Black Cap
Discard Before Assembly
ATTENTION!

A Black Cap protects the
hydraulic mechanism on
the Support Cylinder.
Place the Foot Cap
over the Footrest.
Remove the Black Cap and
discard it before assembly.
The Orange hydraulic
button will become visible.
Insert the Support Cylinder
into the center of the Seat
Plate
Insert the Support
Cylinder into the center
hole of the Footrest
Press down firmly
on seat to secure
into base.
ASSEMBLY INSTRUCTION
To raise and lower the Seat, grasp the Handle and pull upward without applying any weight on the
Seat. To lower, raise the Handle upward by sitting on the Seat.
To disassemble, turn the stool upside
down, and hit the metal clip on the center
of the bottom of the Footrest with a rubber
mallet to disengage the locking
mechanism. Then, turn the stool right side
up, and lift the Seat upward, pulling the
Seat Assembly off of the Footrest.
To separate the Support Cylinder from the Seat, gently strike the Seat Plate with a
rubber mallet until the Seat and Support Cylinder have separated.
MODEL B2304C ROLLING CASTER WHEEL ASSEMBLY
If you have Model B2304C, remove the Staionary Feet by unscrewing each one,
and replace them with the Caster Wheels.
Use an allen wrench to attach the
Seat Plate to the underside of the
Seat with the provided Screws.
Metal Clip