Ameriwood 5947220T User manual

B345947220T00
>> assembly instructions
Modern
night stand
style # 5947220T (Espresso)
style # 5947306T (White)
DPCI # 249-05-0482 (Espresso)
DPCI # 249-05-0491 (White)
TM

Congratulations on your latest Target purchase.
Now what? Don't start sweating over the box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your
room in no time. Good luck--- though we're confident you won't need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order
missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly. Please do not use power tools.
tools needed
2

3
table of contents
introduction
hardware
parts list
how to use the cam lock system
assembly
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number
ready when calling.
2
4
5-6
7
8-25

4
hardware
(1) x6
cam lock
#A22570
(2) x6
cam bolt
#A22510
(3) x2
wood dowel
#A21660
(4) x6
connector housing
#A22900 (white)
#A22920 (black)
(5) x6
connector bolt
#A22910
(10) x2
drawer bracket
#A54223
(7) x4
#6x1-14" flat head screw
#A11600
(8) x10
#8x716" pan head screw
#A12120
(6) x20
nail
#A21110
(9) x4
#8x1-34" pan head screw
#A13410
(13) x1
slide set
#A56750 (black)
#A56760 (white)
(11) x10
#6x 716" flat head screw
#A11080
(12) x3
angle bracket
#A53600
13a
13b
13c
13d

Parts List DESCRIPTION
PART NUMBER
QTY
ITEM LEFT PANEL
35947220010
1A RIGHT PANEL35947220020
1B TOP35947220030
1
CBOTTOM35947220040
1D DRAWER FRONT35947220050
1E APRON35947220060
1F SIDE BASE RAIL359472200702G CENTER BASE RAIL35947220080
1H LEFT DRAWER SIDE
C1500370331010L
1 RIGHT DRAWER SIDEC1500370331010R
1 DRAWER BACK
C1500362331500B
1 DRAWER BOTTOM35947331120
1 BACK PANEL
K594722000
1
Parts shown are the base cabinet of your model. Please note,
most parts are labeled with a sticker or have a letter stamped
on a raw edge.
Parts F, G, H may not be labeled.
This piece is paperboard construction. It is not made from
wood but is required for assembly of your unit.
C
B
A
D
H
G
G
F
E
5
Parts List for 5947220T (Espresso)
back
panel
left
drawer side
drawerback
drawerbottom
right
drawer side

Parts List DESCRIPTION
PART NUMBER
QTY
ITEM LEFT PANEL
35947306010
1A RIGHT PANEL35947306020
1B TOP35947306030
1
CBOTTOM35947306040
1D DRAWER FRONT35947306050
1E APRON35947306060
1F SIDE BASE RAIL359473060702G CENTER BASE RAIL35947306080
1H LEFT DRAWER SIDEC1500370331010L
1 RIGHT DRAWER SIDEC1500370331010R
1 DRAWER BACKC1500362331500B
1 DRAWER BOTTOM35947331120
1 BACK PANEL
K594730600
1
6
Parts List for 5947306T (White)
F
G
G
H
A
B
C
D
E
Parts shown are the base cabinet of your model. Please note,
most parts are labeled with a sticker or have a letter stamped
on a raw edge.
Parts F, G, H may not be labeled.
This piece is paperboard construction. It is not made from
wood but is required for assembly of your unit.
back
panel
left
drawer side
drawerback
drawerbottom
right
drawer side

how to use the cam lock system
2
3
½ turn to fully
lock.
4
Tighten to fully seat. Do not over
tighten. Proper orientation of cam.
1
Lock
Titus
Titus
Titus
7

1
step
8
Proper orientation of CAM LOCK
(1) x2
cam lock (3) x1
wood dowel (11) x3
#6x716" screw (13) x1
left cabinet slide
A
1
1
3
11
11
11
13a
13a
marked with an "L"
finished edge
1. Refer to page 7 for instructions on how to use the cam lock system.

2
step
9
Proper orientation of CAM LOCK
11
11
11
B
1
3
1
(1) x2
cam lock (3) x1
wood dowel (11) x3
#6x716" screw (13) x1
right cabinet slide
13b
13b
marked with an "R"
finished edge
1. Refer to page 7 for instructions on how to use the cam lock system.

3
step
10
(2) x4
cam bolt
C
2
2
2
2
1. Screw-in cam bolts must be screwed down flush.
2. Refer to page 7 for instructions on how to use the cam lock system.

4
step
5
5
D
(5) x6
connector bolt
5
5
5
5
11

5
step
A
B
D
(9) x4
#8x1-34" pan head screw
9
9
9
9
12
finished edge finished edge

6
step
UNLOCK LOCK
D
A
B
C
13
finished edge
1. Refer to page 7 for instructions on how to use the cam lock system.
x4

7
step
(12) x3
angle bracket
(8) x3
#8x716" pan head screw
12
12
12
8
8
8
F
14
Do not fully tighten the screws. Some
adjustment may be necessary later during
the assembly.

8
step
(8) x3
#8x716" pan head screw
15
1. For this step installing the Apron, place unit on it's top as shown.
8
FF
8
F
8
Please Notice:
The Right Panel is not shown for clarity of
attaching angle bracket to Right Panel.
Once the apron is fastened, tighten all screws.

9
step
and/or serious injury.
Failure to do so could cause instability, product collapse,
All nails must be driven into the parts straight and centered.
Please make sure that the Back Panel is attached securely.
WARNING
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
(6) x20
nail
Attach the back panel so that the bottom
edge is even with the bottom (D) and
aligned side to side.
Assure that the unit is square.
Distance from corner to corner must be
equal as shown.
Unfinished
Side
6
16
D
Turn the unit onto its front back
panel

10
step
GH
4
4
2
4
4
1
1
(1) x2
cam lock (2) x2
cam bolt
x2
(4) x6
connector housing
You will need to tap the connector (4) with a hammer
to fully insert. Be sure the connector is positioned as
shown before pushing into holes.
17
1. Screw-in cam bolts must be screwed down flush.
2. Refer to page 7 for instructions on how to use the cam lock system.

11
step
G
HG
UNLOCK LOCK
18
1. Refer to page 7 for instructions on how to use the cam lock system.
x2

12
step
19
H
GG
D
Turn connector screw clockwise
to lock in place.
x6

13
step
1. Lay the drawer sides down on a flat hard surface. Carefully line up the drawer bracket with the holes in the drawer
side as shown. Using a hammer, tap each drawer bracket stem part way into each hole. Repeat this process until the
drawer bracket is fully seated on the drawer side.
(10) x2
drawer bracket
Bracket Orientation Bracket Orientation
20
10 10
leftdrawerside
(marked"LEFT")
rightdrawerside
(marked"RIGHT")