Amiro ARF001 User manual

AMIRO SKIN REJUVENATION DEVICE USER MANUAL
*Thank you for choosing AMIRO.
Illustrations in the user manual of the product, accessories, and user interface are for
reference only.
For your safety, please read this manual carefully before use.
Please keep this manual for future reference.
Please include this manual when transferring the product to others.
Contents
1. Product Information
2. Instruction
3. Care Advice
4. Safety Precautions
5. Warranty
6. Malfunctions and Maintenance

Product Information
Product description
This product is a multi-polar RF home beauty device (“RF device”) designed to improve
facial problems experienced by women using RADIO FREQUENCY (“RF”), ELECTRICAL
MUSCLE STIMULATION (“EMS”), red light, and infrared light technology.
Product specifications
●Product name: AMIRO SKIN REJUVENATION DEVICE
●Product model: ARF001
●Product size: 160×38×38mm
●Size of electrode contact surface: 32×32mm
●Rated input: 5V⎓2A
●Lithium battery capacity: 2600mAh
Product list
AMIRO SKIN REJUVENATION DEVICE×1
Charging cable×1
User manual x1

Instruction
Product illustration
1. Electrodes (6)
2. Temperature sensor
3. LED (internal)
4. Mode indicator
●Firming and lifting mode (green light)
●Wrinkle reduction and rejuvenation mode
(orange light)
5.Power/mode button
6. Intensity "+" button
7. Intensity "-" button
8. Intensity/power indicator
9. Type-C charging port
Introduction to Operation
1. Charging
●Insert the Type-C connector of the charging cable completely into the charging port
of the device.

●Device is fully charged when all 5 intensity/power indicators are lit up.
**The device cannot be used when charging.
**Lay the device down when charging to prevent it tipping over.
2. Powering on and off
●When the device is switched off, long press the switch/mode button for 2s to turn on
the device. When switched on, device will be in default [Wrinkle smoothing and
rejuvenation mode].
●The device will automatically turn off if no operation and no contact with skin is made
within 60 seconds after being powered on.
●Long press the switch/mode button for 2s to power off the device.
3. Switching modes
●When power is on, short press the switch/mode button to switch between [Firming
and lifting mode] in green and [Wrinkle smoothing and rejuvenation mode] in orange.
4. Selecting intensity
●The device’s default intensity is 1 (1 light) when first powered on; it remembers the last
intensity used when it is next powered on.
●After powering on the device, short press the "+" button to increase intensity and the
"-" button to decrease intensity.

●The highest intensity is 5 (5 lights) and lowest is 1 (1 light).
5. Power indicator
●The device does not display remaining power when powered on or in use.
●Short press the switch/mode button to check the intensity/power indicator to see
remaining power when the device is powered off. 5 lights indicate the highest power
level and 1 light indicates the lowest.
6. Low battery and power shortage warnings
●In powered on or standby states, the corresponding indicator will keep flashing when
power is low. Please charge regularly to ensure smooth use.
●When powered off, if the device cannot be turned on by long pressing the
switch/mode button and the 1st intensity indicator flashes 5 times then goes off, power
is low. Please charge regularly to ensure smooth use.
Care Advice
●[Firming and lifting mode]:
It is recommended to use once every 2 days.
●[Wrinkle reduction and rejuvenation mode]:
It is recommended to use once every 2 days.

●For both modes, apply on the face in this order: Left cheek, right cheek, forehead.
●Please use this device together with water-based skin care products such as gels,
serums, or masks.
Treatment steps
Step 1: Makeup removal and cleansing
●Remove makeup and cleanse your face to ensure your skin is clean.
Step 2: Apply the gel
●Apply some gel to the center of the RF electrode or the face (When you feel the
resistance of the device on facial or skin dryness, please replenish gel promptly).
Step 3: Facial care
[Firming and lifting mode] takes about 5 minutes, and [light line repair mode] takes
about 10 minutes.
●Start the RF device and select a mode
●Press the RF device against the left cheek of your face and the device will start
working after a brief vibration (refer to technique illustration).

●After the second brief vibration, switch the device onto the right cheek, and after the
third brief vibration, switch it on to the forehead.
●When the device vibrates for 1 second, it means that the treatment mode is finished.
●Short press the mode switch button to switch to another mode and repeat the above
steps. Use no more than 30 minutes per day.
Step 4: Cleanse and hydrate
●After the care routine, wash your face with clear water and apply skin care products if
needed.
Step 5: Device maintenance
●After treatment, wipe off any gel remaining on the RF device with a slightly damp soft
cloth, then dry it with a dry cloth before putting it back in a box or storage bag.
Treatment techniques (illustrations and introduction)

Right cheek: Press the device against your skin and slowly slide it moving from the
middle out; repeat several times (when applying to the eye area, please reduce intensity
and speed)
●Forehead: Press the device against your skin and slowly slide it moving from the
bottom up
*During use, please move the RF device slowly and do not stop
Safety Precautions
Tips:
Before use, please read all the [Safety precautions] carefully and strictly abide by the
instructions in this manual to prevent undesirable outcomes.
Operation notices
●The recommended ambient temperature for this product is 10℃-30℃. Ensure
temperature in the charging environment is between 10-30℃.
●When using the device for the first time or if a long time has passed since the last use,
first charge the device and make sure all buttons and indicators are normal.
●Set intensity to 1 when using the device for the first time or before your skin becomes
used to this device.

●If you experience abnormal skin conditions, stop using the device immediately and
contact our after-sales service or consult a professional doctor.
●When using the device, make sure the RF electrodes are pressed against the skin. Do
not glide the device quickly over your skin. The recommended speed of movement is
2cm/s, if your skin feels too hot, you may increase speed slightly
●Do not allow the device to remain in the same position over your skin for a long time
so as to prevent burns. Glide the device over your skin.
●Do not look directly at the LED light for a prolonged period to prevent damage to the
eyes
●Do not apply the RF electrodes to the eyelids or around the eyes to prevent damage
to the eyes.
●Differences in individual skin sensitivity may lead to differences in temperature
perception.
●The RF device cannot be turned on or operated while being charged, and all buttons
will not be functional.
Precautions
●This product is for people above 18 years old; please do not use this product on
minors; please keep it in a place out of reach of children.
●Do not use the device on pets as it may cause injury to them.

●Do not use the product for purposes other than those specified in the manual so as to
avoid personal injury or mechanical failure.
●People with physical or mental disabilities should not use this device as it may result in
accident or bodily injury.
●Do not use the device if it is malfunctioning, as this may result in bodily injury or
danger.
●Do not use the device near flammable substances (such as alcohol, thinner, gasoline,
nail polish remover, or hair spray) as this may result in fire, electric shock, or bodily
injury.
●Do not use the device together with flammable cosmetics.
●Do not charge, use or leave the product near a fire, heat source, or high temperature
area, as it may cause the device to overheat, catch fire, or burst.
●Do not use near water sources, in bathrooms or while bathing, as this may result in an
electric shock, short circuit, or fire.
●Please avoid dropping or any collisions to prevent malfunctions or injuries due to the
fall; do not use the device if it has been damaged by being dropped or coming into
collision with something.
●Avoid metal touching the electrodes as it may cause device malfunction and personal
injury.
●Do not use corrosive solvents (alcohol, thinner, gasoline, nail polish remover, etc.) to
wipe the device, as it may damage its surface.

●Turn the power off when the device is not in use or being cleaned to prevent an
electric shock, short circuit, or fire.
●Please do not disassemble or modify the device, as this may cause fire, electric shock,
or physical injury; if the device needs repair, please contact our after-sales service.
●If any abnormalities occur during charging, please unplug the charging cable
immediately. If there is smoke, noise, or odor during operation, please stop using the
device immediately.
Unsuitable Groups
People with any of the following conditions may not use this product because it may
cause accidents or result in skin or bodily damage:
●Menstruation, pregnancy or breastfeeding;
●Puberty or adolescence;
●Metal implants around the application areas;
●Diseases such as cancer (especially skin cancer and pre-cancerous moles), acute
diseases, tuberculosis, febrile diseases, infectious diseases, blood diseases, visceral
diseases, skin diseases, allergic dermatitis, etc.
●Use of this product may cause discomfort or adverse effects among people with
allergies, skin diseases, allergic dermatitis, sensitive skin, etc. If adverse effects occur,
please stop using it immediately.

●Impaired immunes system due to immunosuppressive diseases such as AIDS, or
taking immunosuppressive drugs;
●Consult your physician if you have had permanent plastic fillers placed within the
application area, or you have temporary dermal fillers or Botox implanted within the
application area
●Any disease within the application area due to thermal irritation, such as recurrent
herpes simplex virus;
●Physical irritation within the application area may cause blemishes;
●Allergic, sensitive or fragile skin;
●Fatigue, illness, under the influence of alcohol or on sleeping pills;
●Dilated capillaries caused by prolonged use of steroids, hormones, and other drugs,
or liver dysfunction;
●People using these medical devices: Assistive devices implanted in the body such as
artificial lungs, pacemakers, internal defibrillators, or portable devices such as
electrocardiographs.
Where device should not be applied:
●Do not use this product on the following body parts or if the following conditions
exist:

●Throat nodules, eyeballs, eyelids, inside the mouth, private parts, mucous membranes,
etc.;
●Severe acne in the application area;
●Purulent and inflamed skin, previous scarring or abnormal wound healing;
●If you have undergone surgeries such as laser peeling or chemical peeling in the last 3
months or have healing wounds within the application area;
●Skin inflammation or redness due to sunburn;
●Itchiness or pathological pigmentation on the skin;
●Protruding moles or viral warts on the skin;
●Dermatological conditions such as rashes, inflammation, itchiness, etc.
●Areas with damaged skin integrity (e.g. with burns, blisters, cuts, wounds, active skin
disease or infection).
Note: The above list of safety precautions is not exhaustive. If you are unsure whether
you can use this product, please consult a physician or contact us.

Warranty
1 year limited warranty
For more information about the consumer warranty benefits, please refer to AMIRO’s
official website www.amirobeauty.com. Except as prohibited by laws or otherwise
promised by AMIRO, the after-sales services shall be limited to the country or region of

the original purchase. Under the consumer warranty, to the fullest extent permitted by
law, AMIRO, will, at its discretion, repair, replace or refund your product. Normal wear
and tear, force majeure, abuse or damage caused by the user's negligence or fault are
not warranted. If in doubt please contact the relevant person as AMIRO may identify.
Products which were not duly imported and/or were not duly manufactured by AMIRO
and/or were not duly acquired from AMIRO or a AMIRO’s official seller are not covered
by the present warranties. As per applicable law you may benefit from warranties from
the non-official retailer who sold the product. Therefore, AMIRO invites you to contact
the retailer from whom you purchased the product.
Manufacturer: Shenzhen Accompany Technology Co., Ltd.
Address:26th Floor, Gaoxin Community United Headquarters Building, No.63, Gaoxin
South 10th Road, Binhai Community, Yuehai Street, Nanshan District, Shenzhen, China.
For detailed e-manual, please go to www.amirobeauty.com.