AMP Research BedStep 75309-01A User manual

www.amp-research.com IM75309 rev 11.11.22
1/3
Torque wrench
15mm 19mm
1
AMP PART # 75309-01A
Toyota Tundra 2014 - 2021
Cover body panels
with protective tape to
prevent damage.
12mm 13mm
Secure linkage in vice and tighten bolts. Do not
Torque. Allow steel bracket to rotate freely.
Remove corner bumper cap and use at blade
screwdriver to pry loose. Use caution when re-
moving tabs.
Remove license plate light by rotating and pulling
out. Squeeze metal tabs holding trailer hitch plug
and remove.
Remove plastic plug holding bumper cap onto
lower portion of bumper. Remove license plate
and plug behind holding bumper cap in place.
15mm
Flat Screwdriver
2 3 4
56789
APPLICATION
(Non Resin Bumpers only)
T-25
1 2
3 4
TECH SUPPORT 1-888-983-2204 Monday - Friday, 7:00 AM - 5:00 PM PST
Designed and manufactured by AMP Research. Patent 6,830,257 / 6,641,158 / 6,834,875 / 6,938,909 / 6,942,233 / 7,007,961 / 7,055,839 / 7,163,221
Other US and worldwide patents pending. Three-year limited warranty. “BEDSTEP” is a trademark of AMP Research.

www.amp-research.com IM75309 rev 11.11.22
2/3
19mm 13&19mm
Remove bumper cap from bumper. Use at blade
screwdriver or long pliers from underside of
bumper and fold or squeeze tabs inward.
12mm
12mm
#5
7
6
8
910
Bolt will be installed on
step 6.
Driver Side bumper mount.
Loosen and remove three lower bolts that secure
bumper corner bracket in place.
Lift bumper cap away and loosen and remove 2
upper bolts holding Re enforcement bracket in
place.
Replace Re enforcement bracket. Reinstall bolts
from step 6 and 7. Use provided nuts to secure
bracket in place. Replace bumper components
from steps 2-5.
Leave this bolt out until step 10.
Install mounting bracket using factory fasteners.
Torque fasteners to 90ft-lbs/125Nm. Align bumper
support bracket to mounting hole in Re enforcement
bracket. Torque nuts to 33ft-lbs/44Nm.

www.amp-research.com IM75309 rev 11.11.22
3/3
T-25
Insert PT Screws into corresponding holes and
torque to 6 ft-lbs / 8 N.m.
NOTE: Overtightening may damage step pad.
11
13
12
14

™
Thank you for your recent AMP Research Purchase.
REGISTER YOUR PRODUCT TODAY FOR
FASTER SERVICE & PRODUCT UPDATES
Please visit:
www.amp-research.com/productregistration
or scan the QR Code
Product Registration Benefits:
• Ensure we have your purchase receipt and product info in our
system which is required for warranty
• Faster and easier access to customer service and tech support in
the unlikely event you need warranty or product support
• Registration helps us keep you up to date on product information
and offers
To view other Amp Research products that may be offered for your vehicle.
Please visit: www.amp-research.com
AMERICAN DESIGNED, ENGINEERED AND MANUFACTURED.
Rev 01.05.21

Congratulations on the purchase of your
AMP RESEARCH BedStep®
Here’s what you should know...
OPERATION
The AMP Research BedStep®is foot operated and deploys and retracts with a nudge of your foot.
To deploy, press down using your left foot, on the forward outside corner of the step pad.
To retract, gently kick the underside of the step pad.
Max Load Capacity: 300lbs.
Always use appropriate hand holds when stepping up to or down from your truck’s cargo bed.
MAINTENANCETIPS
The step pad surface and linkage arms can be washed with mild soap and water using a soft brush or
sponge to dislodge any mud, dirt or accumulated road grime. Rinse with fresh water.
To prevent slipping, avoid applying waxes, lubricants or protectants like Armor All®to the step surface.
ATTENTION!
BEDSTEP SHOULD ALWAYS BE STOWEDIN THE RETRACTED POSITION WHEN DRIVING.
amp-research.com
LIMITED WARRANTY
WARNING
AMP RESEARCH warrants product to be free from defects in material and workmanship, for terms specified below, provided there
has been normal use and proper maintenance. All remedies under this warranty are limited to the repair or replacement of any item
found by the factory to be defective within the time period specified.
If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase
and submit a copy with any items returned for warranty work. Upon completion of warranty work, if any, we will return the repaired
or replaced item or items to you freight prepaid. Damage to our products caused by accidents, fire, vandalism, negligence,
misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this warranty.
THE WARRANTY TIME PERIOD IS AS FOLLOWS: THREE YEARS FROM DATE OF PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE
LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL
NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights that vary from state to state.
FOR WARRANTY ISSUES WITH THIS PRODUCT PLEASE CALL AMP RESEARCH CUSTOMER SERVICE 1-888-983-2204
Be sure to read and precisely follow the provided instructions when installing this product. Failure to do so could place the vehicle
occupants in a potentially dangerous situation. After installing or reinstalling, re-check to insure that the product is properly installed.