AMP Research BedStep 75310-01A User manual

www.amp-research.com 1/2 IM75310 rev 11.15.19
1/2
17mm
2 4
3
1 5
6 7 8 9
Torque wrench
15mm 17 mm T25
17mm
10mm
10mm
15mm
1 2
3 4
Remove Bracket Driver Side bumper mount
(do not reuse bolts)
Dodge Ram 1500 2009 - 2018 (2019 Classic)
(with Factory Dual Exhaust Hemi and ECO Diesel)
AMP PART # 75310-01A
Designed and manufactured by AMP Research®. Patent Number 6,830,257; 6,641,158; 6,834,875; 6,938,909; 6,942,233; 7,007,961; 7,055,839; 7,163,221;
7,367,574; 7,380,807; 7,398,985; 7,413,204; 7,487,986. Other US and Worldwide patents pending. Made in USA © 2009 AMP Research
Three-year limited warranty. Professional installation is recommended.
AMP RESEARCH TECH SUPPORT 1-888-983-2204 (Press 2) Monday - Friday, 7:00 AM - 5:00 PM PST
APPLICATION

www.amp-research.com 2/2 IM75310 rev 11.15.19
T25 Torx
Hex Bolts: 41 ft-lbs / 55 Nm
(use new supplied bolts)
15mm
Spacing to be approx 1”
Use supplied T25 Torx screws.
Tighten to 5ft-lbs
Due to variances in builds exhaust tip spacing
varies. The top edge of the exhaust tip should
be approx. 1” from bumper. See step 9 for
tailpipe adjustment
Using a 13mm Socket loosen ball socket joint.
Adjust spacing per step 8. Repeat for passenger
side.
5
7
6
8
9

Congratulations on the purchase of your
AMP RESEARCH BedStep®
Here’s what you should know...
OPERATION
The AMP Research BedStep®is foot operated and deploys and retracts with a nudge of your foot.
To deploy, press down using your left foot, on the forward outside corner of the step pad.
To retract, gently kick the underside of the step pad.
Max Load Capacity: 300lbs.
Always use appropriate hand holds when stepping up to or down from your truck’s cargo bed.
MAINTENANCETIPS
The step pad surface and linkage arms can be washed with mild soap and water using a soft brush or
sponge to dislodge any mud, dirt or accumulated road grime. Rinse with fresh water.
To prevent slipping, avoid applying waxes, lubricants or protectants like Armor All®to the step surface.
ATTENTION!
BEDSTEP SHOULD ALWAYS BE STOWEDIN THE RETRACTED POSITION WHEN DRIVING.
amp-research.com
LIMITED WARRANTY
WARNING
AMP RESEARCH warrants product to be free from defects in material and workmanship, for terms specified below, provided there
has been normal use and proper maintenance. All remedies under this warranty are limited to the repair or replacement of any item
found by the factory to be defective within the time period specified.
If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase
and submit a copy with any items returned for warranty work. Upon completion of warranty work, if any, we will return the repaired
or replaced item or items to you freight prepaid. Damage to our products caused by accidents, fire, vandalism, negligence,
misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this warranty.
THE WARRANTY TIME PERIOD IS AS FOLLOWS: THREE YEARS FROM DATE OF PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE
LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL
NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights that vary from state to state.
FOR WARRANTY ISSUES WITH THIS PRODUCT PLEASE CALL AMP RESEARCH CUSTOMER SERVICE 1-888-983-2204
Be sure to read and precisely follow the provided instructions when installing this product. Failure to do so could place the vehicle
occupants in a potentially dangerous situation. After installing or reinstalling, re-check to insure that the product is properly installed.