AMP Research BedStep AMP 75311-01A User manual

www.amp-research.com 1/2 IM75311 rev 02.24.15
Designed and manufactured by AMP Research®. Patent Number 6,830,257; 6,641,158; 6,834,875; 6,938,909; 6,942,233; 7,007,961; 7,055,839; 7,163,221;
7,367,574; 7,380,807; 7,398,985; 7,413,204; 7,487,986. Other US and Worldwide patents pending. Made in USA © 2009 AMP Research
Three-year limited warranty. Professional installation is recommended.
AMP RESEARCH TECH SUPPORT 1-888-983-2204 (Press 2) Monday - Friday, 6:00 AM - 5:00 PM PST
Jeep Wrangler JK
2007-2015
Torque wrench
13mm 15mm T25
19-03563-90
11-03639-90
20-03797-10
16-03907-90
19-03341-90
19-03783-90
15mm
16-03908-90
15 &16mm
PART NUMBER:
AMP 75311-01A
Using a 16mm Socket with extension remove
the two body mount nuts and the bumper
bracket bolt. NOTE: Bolt may not be present if
aftermarket bumper is on vehicle.
Using a 15mm wrench assemble steel bracket to
Linkage assembly. Torque bolts to 20 ft-lbs.
Drop threaded plate into slot in frame. Slot is
located on both sides of the frame. The outer
slot is preffered but may not be accessable with
aftermarket bumpers or racks.
Set assembly into position and replace
hardware from step 1. A M10 bolt and washers
are supplied if bolt is not present. Do not tighten
19-02486-90
16mm
16mm
1 2
3 4

www.amp-research.com 2/2 IM75311 rev 02.24.15
13 mm
Thread M8 bolt into threaded bracket from step 3.
Torque to 16ft-lbs.
Torque bolt and two factory nuts from step 4 to
20 ft-lbs.
Offset the step pad towards the left and secure
using provided PT Screws. Tighten to 5 ft-lbs us-
ing T25 torx bit.
To deploy the step, press down using your foot
on the outside edge of the step pad. To retract,
gently kick up on the underside of the step pad.
15 &16mm
T25 Torx
5
7
6
8

Congratulations on the purchase of your
AMP RESEARCH BedStep®
Here’s what you should know...
OPERATION
The AMP Research BedStep®is foot operated and deploys and retracts with a nudge of your foot.
To deploy, press down using your left foot, on the foward outside corner of the step pad.
To retract, gently kick the underside of the step pad.
Max Load Capacity: 300lbs.
Always use appropriate hand holds when stepping up to or down from your truck’s cargo bed.
MAINTENANCE TIPS
The step pad surface and linkage arms can be washed with mild soap and water using a soft brush or
sponge to dislodge any mud, dirt or accumulated road grime. Rinse with fresh water.
To prevent slipping, avoid applying waxes, lubricants or protectants like Armor All®to the step surface.
ATTENTION!
BEDSTEP SHOULD ALWAYS BE STOWED IN THE RETRACTED POSITION WHEN DRIVING.
amp-research.com
LIMITED WARRANTY
WA RNING
AMP RESEARCH warrants product to be free from defects in material and workmanship, for terms specied below, provided
there has been normal use and proper maintenance. All remedies under this warranty are limited to the repair or replace-
ment of any item found by the factory to be defective within the time period specied.
If you have a warranty claim, rst you must call our factory at the number below for instructions. You must retain proof of
purchase and submit a copy with any items returned for warranty work. Upon completion of warranty work, if any, we will
return the repaired or replaced item or items to you freight prepaid. Damage to our products caused by accidents, re,
vandalism, negligence,
misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this warranty.
THE WARRANTY TIME PERIOD IS AS FOLLOWS: THREE YEARS FROM DATE OF PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE
LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL
NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specic legal
rights, and you may also have other rights that vary from state to state.
FOR WARRANTY ISSUES WITH THIS PRODUCT PLEASE CALL AMP RESEARCH CUSTOMER SERVICE 1-888-983-2204
Be sure to read and precisely follow the provided instructions when installing this product. Failure to do so could place the
vehicle occupants in a potentially dangerous situation. After installing or reinstalling, re-check to insure that the product is
properly installed.