AMS TCS3701 User manual

Quick Start Guide
QG000130
TCS3701
TCS3701 EVM
ALS/Color and Proximity Sensor for Use Behind OLED
Displays Evaluation Kit
v1-00 •2019-Jan-09

Document Feedback
TCS3701 ●TCS3701 EVM
Content Guide
Quick Start Guide •PUBLIC
QG000130 •v1-00 • 2019-Jan-09
8│2
Content Guide
1Out of the Box................................3
2Software Installation......................4
3Connect Hardware.........................6
4Start the Application......................7
5Uninstall Application.....................8

Document Feedback
TCS3701 ●TCS3701 EVM
Out of the Box
Quick Start Guide •PUBLIC
QG000130 •v1-00 • 2019-Jan-09
8│3
1 Out of the Box
For a detailed description of the TCS3701 ALS/Color and Proximity Sensor for Use Behind
OLED Displays Evaluation Kit, please refer to User Guide:
●UG000418
Each TCS3701 Evaluation Kit comes with the following components:
Figure 1 :
Evaluation Kit Contents
No.
Item
Description
1
TCS3701 Daughter Card
PCB with TCS3701 sensor installed
2
EVM Controller Board
Used to communicate USB to I2C
3
USB Cable (A to Mini-B)
Connects EVM controller to PC
4
Flash Drive
Includes application installer and documents

Document Feedback
TCS3701 ●TCS3701 EVM
Software Installation
Quick Start Guide •PUBLIC
QG000130 •v1-00 • 2019-Jan-09
8│4
2 Software Installation
1. Plug the ams flash drive into an unused USB port
2. Double-click the Setup.exe file on the flash drive, or click Start > Run and type E:setup.exe and
press Enter. IMPORTANT: Use the appropriate drive letter in the above command to install the
software. Flash Drive will commonly be assigned the next available drive letter for example C:
hard drive, D: CD-ROM, E: flash drive
3. The Setup Wizard will open and guide you through the installation of the TCS3701 host
software, (Figure 2 through Figure 8)
4. At the end of the installation, click Finish to exit the setup.
Figure 2:
Welcome Screen
Figure 3:
Liability Disclaimer
Figure 4:
Select Installation Folder
Figure 5:
Select Start Menu Folder

Document Feedback
TCS3701 ●TCS3701 EVM
Software Installation
Quick Start Guide •PUBLIC
QG000130 •v1-00 • 2019-Jan-09
8│5
Figure 6:
Installation in Progress
Figure 7:
Information Screen
Figure 8:
Installation Completed Successfully

Document Feedback
TCS3701 ●TCS3701 EVM
Connect Hardware
Quick Start Guide •PUBLIC
QG000130 •v1-00 • 2019-Jan-09
8│6
3 Connect Hardware
Plug the TCS3701 Daughterboard into the Controller board (Figure 1). Always use ESD procedures
when handling the EVM.
Using the enclosed USB cable, plug the mini-B connector into the EVM module. Using the other end
of the cable, plug the USB A-connector into a USB port on the computer.
When the USB cable is connected, the green LED should flash momentarily on power up to indicate
that power is being received via the USB interface, and the controller board processor is running. If the
green LED does not flash, check the USB cable connections; unplug the USB cable and try again. If
the green LED still does not flash, check the PC for USB error messages.

Document Feedback
TCS3701 ●TCS3701 EVM
Start the Application
Quick Start Guide •PUBLIC
QG000130 •v1-00 • 2019-Jan-09
8│7
4 Start the Application
To start the application select ams > TCS3701 EVM > TCS3701 EVM on the All Programs menu. The
default installation directory depending on the device and the operating system you are using is:
C:\Program Files\ams\TCS3701_EVM (Windows 32 bit operating systems)
C:\Program Files (x86)\ams\TCS3701_EVM (Windows 64 bit operating systems)
A different install path may be selected by the user during the install (Figure 4). When started, the
TCS3701window will open on the PC and automatically connect to the hardware.

Document Feedback
TCS3701 ●TCS3701 EVM
Uninstall Application
Quick Start Guide •PUBLIC
QG000130 •v1-00 • 2019-Jan-09
8│8
5 Uninstall Application
To remove the software from your computer (Figure 9), select ams > TCS3701EVM > Uninstall
TCS3701 EVM or use the Windows Control Panel.
Figure 9:
Remove Installation
Headquarters
ams AG
Tobelbader Strasse 30
8141 Premstaetten
Austria, Europe
Tel: [phone]
Please visit our website at www.ams.com
Buy our products or get free samples online at www.ams.com/Products
Technical Support is available at www.ams.com/Technical-Support
Provide feedback about this document at www.ams.com/Document-Feedback
For sales offices, distributors and representatives go to www.ams.com/Contact
For further information and requests, e-mail us at [email protected]
Copyright ams AG. Trademarks Registered. All rights reserved. The material herein may not be reproduced, adapted, merged,
translated, stored, or used without the prior written consent of the copyright owner.
ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property
damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any
kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or
liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services.