AMX Modero NXD-1500VG User manual

NXT-1500VG/NXD-1500VG DATA SHEET
Modero®Touch Panels
15” Modero
Multimedia
Touch Panel
The 15” Modero VG Series Touch Panel – available in Table Top and Wall/Flush Mount versions –
represents the ultimate multimedia touch panel solution.
THE CONTROLLING FORCE
Simplicity, convenience and luxury are benchmarks of the 15” Modero VG Series. It’s the perfect solution for corporate and
home environments where networked systems, multimedia functionality and a larger number of connected devices require
powerful integration and control.
DIGITAL STREAMING
Powered by a DSP core, the 15” VG Series has the muscle to handle digital streaming - both video and audio, in wired or
wireless configurations. The 15” Modero VG Series features full support for standard MPEG-2 video and audio. Special
cabling for media is no longer a requirement in order to leverage the network to its fullest potential.
ALL ETHERNET
As with all next generation Modero panels, the 15” Modero VG Series uses industry-standard Ethernet connectivity for both
wired and wireless networking. Integration and installation have never been easier.

NXT-1500VG/NXD-1500VG DATA SHEET
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
NXT-1500VG (FG2252-61)
NXD-1500VG (FG2253-61)
DIMENSIONS (HWD)
•NXD-1500VG (with faceplate): 14 3/8” x 15 1/4” x 3 1/4”
(36.5 cm x 38.6 cm x 8.4 cm)
•NXD-1500VG (fully raised): 13” x 15” x 11 3/4”
(32.9 cm x 38 cm x 29.8 cm)
•NXT-1500VG (fully lowered): 7 1/2” x 15” x 11 1/2”
(18.9 cm x 38 cm x 29.8 cm)
•CB-TP15 (conduit/wallbox): 13 1/2” x 14 1/4” x 3 1/2”
(34.2 cm x 36 cm x 8.9 cm)
•MB-TP15 (VESA mounting box): 14 3/8” x 15 1/4” x 3 5/8”
(36.5 cm x 38.6 cm x 9.1 cm)
POWER
•Constant current draw: 3.7 A @ 12 VDC (stand-alone)
•Startup current draw: 5.5 A @ 12 VDC (stand-alone)
MINIMUM POWER SUPPLY REQUIRED
PSN6.5 Power Supply (FG423-41)- using accessories can
increase the power draw requirements
MEMORY
•256 MB on-board memory
•128 MB Compact Flash (upgradeable to 1 GB factory
programmed)
WEIGHT
•NXD-1500VG: 13.45 lbs (6.10 kg)
•NXT-1500VG: 17.15 lbs (7.78 kg)
LCD PARAMETERS
•Aspect Ratio: 4:3
•Brightness (luminance): 400 cd/m2
•Channel transparency: 8-bit Alpha channel transparency
•Contrast ratio: 300:1
•Display area (HW): 304.13 mm x 228.10 mm
•Display colors: 16 million colors (24-bit color depth)
•Dot/pixel pitch: 0.297 mm
•Screen resolution (HW): 1024 x 768
•Video formats: NTSC, PAL, and SECAM (shown within
variable-size video windows)
VIEWING ANGLES
Vertical: + 85° (up from center) and - 85° (down from
center)
SUPPORTED AUDIO SAMPLE RATES
48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz,
12000Hz, 11025Hz, and 8000Hz
CERTIFICATIONS
FCC Part 15 Class B, CE, and EN 60950
SUPPORTED TRANSPORT PROTOCOLS
•RTP (MPEG-2/MPEG-4 Transport Stream)
•UDP (MPEG-2 Transport Stream)
SUPPORTED AUDIO CODECS
•Advanced Audio Coding (AAC)
•MPEG Audio Level 2 (MP2)
•MPEG Audio Level 3 (MP3)
SUPPORTED VIDEO CODECS
•MPEG-2
•MPEG-4
FRONT PANEL COMPONENTS
•Light Sensor: Photosensitive light detector for automatic
adjustment of the panel brightness
•Motion Sensor (PIR): Proximity Infrared Detector to wake
the panel when panel is approached
•Front Setup Access Button: Pushbutton (grey) used to
either put the panel into a “sleep” or “wake” state
•Microphone: Used for intercom applications
•Speakers: Stereo output with a frequency response of
450 Hz - 7 KHz
REAR PANEL COMPONENTS
•RGB Connector: Made available only by using an NXA-RGB
interface card installed within the touch panel. Used with
Component/RGB signals
•Audio/Video Connector: RJ-45 connector for communica-
tion of differential audio/video signals
•Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps
communication
•PWR Connector: 2-pin 3.5 mm mini-Phoenix connector
•Stereo Output Connector: Stereo output through a 3.5mm
mini-jack
•USB Connector: Two Type A USB ports
•Mini-USB Connector: 5-pin Mini-USB connector
OPERATING / STORAGE ENVIRONMENTS
•Operating Temperature: 10° C (50° F) to 40° C (104° F)
•Operating Humidity: 20% to 85% RH
•Storage Temperature: -20° C (-4° F) to 60° C (140° F)
•Storage Humidity: 5% to 85% RH
INCLUDED ACCESSORIES
•Installation Kit for 15” NXD panels (KA2251-02):- 2-pin
mini-Phoenix connector (41-5025)- Four Drywall clips
(62-5924-05) and #6 -metal strips (80-0192)- Three
Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)-
Two CAT5 Suppression Ferrites (04-0014)
•Installation Kit for 15” and 17” NXT panels (KA2251-04):-
2-pin mini-Phoenix connector (41-5025)- One CAT5
Suppression Ferrites (04-0014)- Three Phillips-head
screws (#4-20 x 0.250 Black) (80-0114-08)
•Included within the RGB Kit (FGxxxx-xxRGB) is the
following:- Modero VG Touch Panel (NXD/NXT-
1200/1500/1700VG)- NXA-AVB/RGB Breakout Box
(FG2254-11)- NXA-RGB internal RGB/VGA Interface Card
(FG2260)- NXA-RGBCBL, 15-pin to 5X BNC RGB Breakout
cable (FG2250-80)- NXA-MTC/RGB Modero 10’ foot Table
Top Cable (with RGB connector) (CA2250-70)
•Included within the Video Kit (FGxxxx-xV) is the following:-
Modero VG Touch Panel (NXD/NXT-1200/1500/1700VG)-
Modero 10’ foot Table Top Cable (CA2250-50) - NXA-AVB/
ETHERNET Breakout Box (FG2254-10)
OTHER AMX EQUIPMENT
•CB-TP15 Conduit/Wallbox (FG032-10)
•CC-USB (Type A) to Mini-B 5-Wire programming cable
(FG10-5965)
•Kensington Lock Bracket (FG2259-10) (optional only
with NXTs)
•MAX-CSE MAX Video Encoder (FG2178-70)
•MB-TP15 Universal VESA Mounting Box (FG032-50)
•NXA-AVB/ETHERNET Breakout Box (FG2254-10)
•NXA-AVB/RGB Breakout Box (FG2254-11)
•NXA-BASE/B (FG2255)
•NXA-MTC/RGB Modero 10’ foot Table Top Cable (with RGB
connector) (CA2250-70). This cable is not wall-rated for
NXD models.
•NXA-PCI80211G Wireless Card (FG2255-04)
•NXA-RGBKIT RGB upgrade kit for Composite Video
touch panels (FG2255-11):- NXA-AVB/RGB Breakout
Box (FG2254-11)- NXA-MTC/RGB Modero 10’ foot Table
Top Cable (with RGB connector) (CA2250-70)- NXA-RGB
internal RGB/VGA Interface Card (FG2260)- NXA-RGBCBL,
15-pin to 5X BNC RGB Breakout cable (FG2250-80)- NXT
Table Top replacement I/O plate (with RGB connector
opening) (62-2250-59)- NXD WallMount replacement
adhesive overlay for existing I/O plate (53-2250-03)
Note: The NXT replacement I/O plate is a single piece which
is meant to be swapped-out with the pre-existing plate
shipped with Composite Video panels. On NXD panels, the
RGB connector opening is pre-drilled into the I/O plate
but can only be accessed by replacing the adhesive cover
and maintaining the existing overlay. When upgrading NXD
panels with this kit, don’t replace the NXD I/O plate, only the
adhesive cover.
•NXA-RGBCBL, 15-pin to 5X BNC RGB Breakout cable
(FG2250-80)
•NXA-RK15 Rackmount kit for 15” Wall Mount panels
(FG2904-51)
•NXT-BP (FG2250-10)
•NXT-CHG (FG2250-50)
•PSN6.5 Power Supply (12 VDC) (FG423-41)
•Upgrade Compact Flash (factory programmed with
firmware):NXA-CFTPV256M - 256 MB V/VG compact
flash card (FG2116-43) NXA-CFTPV512M - 512 MB V/VG
compact flash card (FG2116-44) NXA-CFTPV1G - 1 GB
V/VG compact flash card (FG2116-45)

NXT-1500VG/NXD-1500VG DATA SHEET
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
AUDIO/VIDEO ETHERNET
AL
AUDIO / VIDEORGB
AL
ETHERNET
PROGRAM
PWR
12VDC
PROGRAM
12VDC
P
WR
11 3/4”
(29.8 cm)
7 1/2”
(18.9 cm)
8 5/8”
(21.9 cm)
14”
(35.6 cm)
2 1/2”
(6.2 cm)
3 1/4”
(8.4 cm)
3 1/4”
(8.4 cm)
1/2”
(1.2 cm)
2 7/8”
(7.2 cm)
5/8”
(1.5 cm)
15 1/4”
(38.6 cm)
14 3/8”
(36.5 cm)
15”
(38 cm)
14 3/8”
(36.5 cm)
13”
(32.9 cm)
11 3/4”
(29.7 cm)
12 5/8”
(32.1 cm)
12 3/4”
(32.4 cm)
NXD-1500VG
(Front View)
NXT-1500VG
(Right View)
NXT-1500VG
(Front View)
NXD-1500VG
(Left & Right Views)
NXD-1500VG
(Top View)
NXT-1500VG
(Top View)
Interconnect Options
Connector Plates
NXT-1500VG/RGB
NXT-1500VG