Anchor Fast Wooden Grilling Pavilion User manual

Care and Maintenance
Your new garden furniture is a natural timber product. In order that you may prolong the life of this
product we recommend that you follow the general care and maintenance advice below.
All fixings to be checked for tightness and signs of deterioration at the beginning of each season and on
a regular basis.
Product should be checked regularly and re-coated with a suitable topcoat finish when required. If
accidental damage occurs lightly sand and re-coat with a suitable water based wood preservative. Product
can be cleaned periodically with a mild soapy detergent.
This is a natural product and therefore colour may vary slightly from piece to piece.
As a natural product it is possible that knots can work loose and sometimes fall out, also resin leakage and
small cracks can appear on the woods surface. Should this happen, clean off resin, ensure any sharp edges
are sanded smooth and recoat.
Products should be given suitable protection from adverse weather conditions, particularly during the
winter months.
Please retain these instructions for future reference and use.
Helpline 01302 761573
Monday to Friday 9am - 5pm
Helpline 01302 761573
Monday to Friday 9am - 5pm
Wooden
Grilling Pavilion
Attractive outdoor wooden Grilling pavilion
ideal for BBQ use with its built-in outlet for smoke,
or as a garden shelter for use with seating
Dimensions:
W2000 x D1247 x H2366
Manufactured in the UK from FSC Certified
slow grown hardwearing pine
Helpline: 01302 761573. Open Monday - Friday, from 9.00am - 5.00pm
Manufactured by:
Product Code 141031
Wooden Grilling Pavillion Feb 14_Layout 1 19/02/2014 20:07 Page 1

Diagram 1
Fit the 2 x side frame assemblys (A) to the
frame back assembly (B) using 4 x fixings (1).
Fit the back top rail assembly (C) to side
frame assemblys (A) using 2 x fixings (1) and
2 x fixings (4).
1
(A)
(1)
(4)(4)
(1)
2
(D)
Wood
Grilling Pavilion
Helpline 01302 761573
Monday to Friday 9am - 5pm
Helpline 01302 761573
Monday to Friday 9am - 5pm
Before you start
– Check the fixings pack and make sure you have all of the parts listed above. If not call our helpline
– Use cardboard packaging to protect surfaces during assembly
– Only tighten fully when all components are aligned in place
– Always sight on firm level ground
Left & Right
A Hand Side 2
Frame Assemblys
BFrame Back 1
Assembly
CBack Top Rail 1
Assembly
DRoof 2
Assembly
EFacia Boards 4
2 x L/H 2 x R/H
FFacia 2
Caps x 2
G Chimney Cap 1
HChimney 2
JShelf 2
1 x L/H 1 x R/H
Fixings supplied
Ref Description Illustration Qty
Parts supplied
Ref Description Illustration Qty
L110 x ø6mm
1Allen Screws 6
L 75mm
2Woodscrew 4
L 30mm
3Woodscrew 20
L 45mm
4Woodscrew 26
5 L 25mm Nails 8
L 38mm
6Woodscrew 8
Tools Required
Allen Key (Supplied)
Pozi blade screwdriver
Hammer
Diagram 2
Fix roof assemblys (D) together
using 4 x fixings (3).
3Diagram 3
Lift jointed roof onto assembled frame
and fix from outside using 4 x fixings (2).
Fit L/H and R/H facia boards (E) using
24 x fixings (4) aligning using the
pre-drilled holes in the roof and the
facia board, then fix facia caps to
front and back from inside using
4 x fixings (3).
Fix chimney to roof using 8 x fixings (6) and
chimney cap (G) using 8 x fixings (5), finally
fix L/H and R/H shelf (J) with the groove
facing down using 12 x fixings (3).
(A)
(C)
(B)
(1)(1)
(1)(1)
(D)
(3)
(3) (3)
(J)
(3)
(4)(4)
(E) (E)
(3)
(5)
(6) (6)
(2)(2)
Wooden Grilling Pavillion Feb 14_Layout 1 19/02/2014 20:07 Page 3