Anchor Fiesta User manual

Assembly Instructions
8’ through 16’ Wide Systems
With Expandable Kits
FI816 0407
PRODUCTION FACILITIES:
BRADENTON, FL
EVANSVILLE, IN
PHONE: [phone]
FAX: [phone]
1-800-544-4445
EMAIL: [email protected]
www.anchorinc.com
SALES OFFICES:
1100 BURCH DRIVE
PO BOX 3477
EVANSVILLE, IN 47733 USA
EC 3349

2

3
* For 10’-0” Starter and Extension
parts and instructions, see pages 6
and 7.
Warning: Do not drag fabric tent top
across hard or rough surfaces as abrasion
from tent hardware is possible.

4

5
4’-0”
4’-0”
(2) 10” nails in
each base plate.
Hammer down
flush with base
plate to secure.

6
Connect 2-pc ridge and pin to PTTs using the PTRE
pointed downward so that the ridge is elevated.
Pin cross bars together and attach to frame as shown.

7

Thank you for purchasing an Anchor product. In return, we pledge Quality, Service and
Craftsmanship and are available for any questions you may have or assistance you may need.
PHONE NUMBER
812-867-2421
FAX NUMBER
812-867-0547
Anchor products are of superior design and operate best within the parameters of these instruc-
tions. It is IMPERATIVE that the instructions be carefully read and COMPLETELY FOLLOWED.
Please read installation instructions before the installation or removal of this product. Installation
instructions are available at www.anchorinc.com.
For additional assistance consult: “The IFAI Procedural Handbook For The Safe
Installation And Maintenance Of Tentage” and the IFAI “Pullout Capacity Of Tent Stakes”,
both available from the IFAI Tent Rental Division.
CAUTION:
1. For each installation, the installer is solely responsible for evaluating the site and the proper
securing method determined. Some soils require different staking or securing than that provided
with the tent. Due to this variety of soil conditions, these are the manufacturer’s suggested
sequence of installation procedures. Anchor’s responsibility is limited to the construction of the
tent. We are not responsible for methods that installers may choose to secure the tent to the
ground.
2. Inasmuch as the weather is unpredictable, good judgment and common sense must be incor-
porated within installation guidelines. It is the responsibility of the tent installer/maintainer to
determine the severity of the weather, proper time and method of installation and/or erection and
disassembly.
This product has been manufactured for use as a temporary structure. For the safety of all occu-
pants, evacuation is recommended if threatening weather occurs, or if there is any doubt concern-
ing the safe use of this product.
3. Proper safety equipment should be used at all times to insure a safe installation and take
down. We suggest a careful evaluation be made to determine safety equipment needed, such as
hard hats, steel-toe shoes, safety glasses and other as required.
4. Anchor stands behind its products in accordance with its standard Terms and Conditions of
sale. A copy of our Terms and Conditions of Sale can be obtained by contacting Anchor at the
telephone number and/or address on this document.
28.2 03/23/05
EVANSVILLE, INDIANA