Antec Nineteen Hundred User manual

NINETEEN
HUNDRED
User
Manual

2
Nineteen Hundred User Manual
Congratulations on your purchase of the Antec Nineteen Hundred!!
Meet the Nineteen Hundred, a case engineered for performance and built to enclose the ultimate PC.
It is an unbeatable enclosure that delivers a combination of cooling, performance, and convenience and
stands head and shoulders above the competition.
With 9 expansion slots, the Nineteen Hundred features an advanced cooling system for graphics cards
up to 330 mm (13.0 inches) in length. Dual-layer mesh provides a stylish and new fashion into computer
hardware. Nineteen Hundred has use many silicone grommets technology to limit vibrations.
In addition, Its comes with 4 advance silent Fluid Dynamic bearing chassis fan which can provide lowest
fan acoustic to under 18dB (A). Finally, the Nineteen Hundred is constructed of durable SECC steel that
lasts for builds to come. Along with pioneering design and solid construction the Nineteen Hundred is
the last word in ultimate PC builds
At Antec, we continually refine and improve our products to ensure the highest quality. As such, your
new chassis may differ slightly from the description in this manual due to improvements applied for the
optimal building experience. As of November 15, 2011, all features, descriptions, and illustrations in this
manual are correct.
Disclaimer
This manual is intended only as a guide for Antec’s computer
enclosures. For more comprehensive instructions on installing the
motherboard and peripherals, please refer to the manuals that
come with those components.

3
Table of Contents
Section 1: Introduction
1.1 Getting to Know Your Chassis............................................................................5
1.2 Chassis Specifications.........................................................................................6
1.3 Included Screws .................................................................................................6
1.4 Before You Begin................................................................................................7
Section 2: Hardware Installation
2.1 Setting Up ..........................................................................................................9
2.2 Motherboard Installation...................................................................................9
2.3 Installing KUHLER H2O Liquid Coolers................................................................11
2.4 Power Supply Installation ..................................................................................12
2.5 External 5.25” Device Installation......................................................................13
2.6 Internal 3.5” / 2.5” Device Installation ..............................................................15
2.7 Cable Management............................................................................................17
Section 3: Front I/O Ports
3.1 USB 2.0...............................................................................................................19
3.2 USB 3.0...............................................................................................................19
3.3 AC’97 / HD Audio Ports......................................................................................20
3.4 Power Switch / Reset Switch / Hard Disk Drive LED Connectors.......................20
3.5 Rewiring Motherboard Header Connections.....................................................21
Section 4: Cooling System
4.1 Included Fans .....................................................................................................23
4.2 Optional Fans .....................................................................................................23
4.3 Fan Switch Controller.........................................................................................24
4.4 Air Filters............................................................................................................25

4
Section 1
Introduction
NINETEEN HUNDRED User Manual

5
1.1 Getting to Know Your Chassis
1. 3 x 5.25” external tool-less drive bays
2. 12 x 3.5/2.5” internal drive bays
3. 2 x 2.5” internal drive bays
4. 3 x 120 mm front intake fans
5. 2 x 120 mm HDD internal fan mounts
6. 1 x 120 mm Rear exhaust fan
7. 2 x 120 mm top exhaust fans
8. Motherboard Mount: SSI CEB, E-ATX, ATX, Micro ATX, Mini-ITX
9. CPU cutout
10. Extra large cable routing space≦30mm
11. Power supply mount: ATX/ESP standard PSU x 2
12. Front Ports: 4 x USB3.0, 2x USB2.0, Audio In/Out