Anthro Adjustable Laptop Cart 2 User manual

ASSEMBLY INSTRUCTIONS
Anthro Corporation®| 10450 SW Manhasset Dr. | Tualatin, OR 97062
Toll-free: 800.325.3841 | Fax: [phone] | email: [email protected] | anthro.com
Outside the U.S. | Tel: [phone] | Fax: [phone]
Adjustable Laptop Cart 2
Rev A - October, 2012
Product Part#
Adjustable Laptop Cart 2 ALCABK/xx

WELCOME
Thank you for purchasing
Anthro's Adjustable Laptop Cart 2. If
you have any questions or if we can
help you in any way, please contact
us at 800.325.3841.
TOOLS
These tools are provided for
assembly of your
Adjustable Laptop Cart 2:
5/32" Anthro hex driver
5/32" hex driver bit
3/16" hex key
PARTS LIST
Before beginning assembly of your cart, please review the
parts list to verify that your shipment is complete.
2
Product Quantity Part Number
01 Shelf 1 100-6671-00
02 Shelf Bracket 2 225-4608-00
03 3/4" Wood Screw 8 325-5575-00
04 Column Assembly 1 835-
05 Base 1 175-5181-00
06 Caster, non-locking 2 150-5053-00
07 Caster, locking 3 150-5052-00
08 Lock Nut 4 325-5189-00
09 Lever 1 835-5392-00
10 1" Button-head Cap Screw 4 325-5537-00
01
02
03
04
05
06
07
09
08
10

Adjustable Laptop Cart - 2 Assembly Instructions 3
STEP 1
Assemble Cart Base and Column
Insert the casters into the base so that the two locking casters (with tabs) are
next to each other.
Place the base on the floor and lock the two locking casters. Align the column
with the base as shown. Push the column into the base.
STEP 2
Install the Adjustment Lever and Shelf Bracket
Align the lever with the top of the column as shown so
the lever sets in the slot.
Set the lever into the top of the column, then cover it
with the Shelf Bracket. Align the bracket with the
column so the set of four holes at the center of the bracket line up with the
four holes at the column.
One at a time, insert a 1" Button-head Screw through the bracket and into the
column, then capture the screw with a Lock Nut. Hold the Lock Nut in place
and tighten the screw using the 3/16" hex key provided. Install loosely first,
then tighten all.
STEP 3
Attach Shelf to Shelf Bracket
Align the cart shelf with the shelf bracket so the four screw-heads on the
bracket rest in the notches on the bottom of the shelf and the holes along the
perimeter of the bracket line up with the pre-drilled holes ont he bottom of the
shelf.
Attach the shelf to the bracket with eight 3/4" Wood Screws using the 5/32"
hex Anthro driver.
1” Button-head Screw
325-5537-00 Lock Nut
325-5263-00
3/4" (#10-9) W
ood Screw
325-5575-00
CONGRATULATIONS! YOUR CART ASSEMBLY IS COMPLETE!
Shelf Bracket

*300-5574-00*
300-5574-00
Anthro Corporation®| 10450 SW Manhasset Dr. | Tualatin, OR 97062
Toll-free: 800.325.3841 | Fax: [phone] | email: [email protected] | anthro.com
Outside the U.S. | Tel: [phone] | Fax: [phone]
Warranty:
The Adjustable Laptop Cart 2 has a Lifetime Warranty against manufacturing defects; 5-year warranty on the cylinder.
Notices:
Technology Furniture is a trademark of Anthro Corporation. Anthro reserves the right to modify the design and specifications without prior notice.