Anzzi SP-AZ076 User manual

INSTALL GUIDE
Model#
SP-AZ076
PERFECTION IS OUR TRADITION™
v2.0516

Parts List Pg. 1
Before You Start Pg. 2
Spec Drawing Pg. 3
Installation Pg. 4
Care & Maintenance Pg. 11
Warranty Pg. 12
Registration Final Page
TABLE OF CONTENTS
YOUR REVIEWS MATTER!
For more information please call 1-844-44-ANZZI
or email us at [email protected]
The ANZZI™ Family thanks you for your purchase and hopes you enjoy your very own ANZZI
product for years to come! In the meantime let us know about your experience? We would love
to hear your thoughts from the packaging to the quality and function of the product.
Leave a review on www.ANZZI.com/reviews and let everyone know how satisfied you are with
ANZZI!
Also, we humbly request submitting as many pictures as possible along with your review.
Millions of shoppers will want to know about your experience with our products. Don’t just tell
but show, too!

PARTS LIST
PERFECTION IS OUR TRADITION™
pg. 1
2. Diverter
1. Shower Head
3. Body Jets
4. Hand Shower
1
3
2
4
1
2
3
4
5
22
23
24
7
11
12
15
21
20
16 17
18
8
9
10
6
19
1314
Component no.
Component
Material
1
body
s/s
2
head shower
s/s
3
pad
EPDM
4
screw 1
s/s
5
clip
s/s
6
pvc hose
pvc
7
decorate cap
ABS
8
hand shower
ABS
9
hand shower holder
ABS
10
flexible hose
s/s
11
body jets
ABS
12
washer
EPDM
13
nut
ABS
14
one way joint
ABS
15
braided hose
s/s
16
faucet
brass
17
on / close cartridge
brass
18
knob
zinc
19
screw 2
s/s
20
bracket
s/s
21
plug
ABS
22
cap
ABS
23
long- short connector
brass
24
base
ABS

PERFECTION IS OUR TRADITION™
pg. 2
For any questions or concerns contact
our dedicated technical support team
at 1-844-44-ANZZI.
BEFORE YOU START
Screwdriver Channel Locks
Adjustable Wrench Allen key
Goggles
Teflon tape
Recommended Items
ATTENTION: Please read all instructions thoroughly
including all warnings, attentions and notes before
beginning installation.

PERFECTION IS OUR TRADITION™
pg. 3
SPEC
DRAWING
SP-AZ076
Perfection is our Tradition™
Material: Stainless Steel
Finish: Brushed
Handles: 3
Jets: 1
Shower: 2.99” x 6.535”
Sprayer: 60” reach
Weight: 11.90 lbs
Height: 47.24”
Supply: 1/2” connections
Flow: 2.5 gpm
Features
Heavy Rain™ Showerhead
Acu-Stream™ high pressure body jets
Euro-Grip™ hand held sprayer
Rhino Alloy™ certified materials
6.30"
17.72"
47.24"

Figure A
INSTALLATION (SETUP)
PERFECTION IS OUR TRADITION™
pg. 4
Before drilling any holes for the shower panel brackets, ensure there are no hidden cables or
pipelines aligned with the desired drilling position.
Drill the two holes for the top bracket 1” apart at the desired height.
Drill the two holes for the bottom bracket 1” apart at approximately 45” below the top bracket.
IMPORTANT
Step A
Step A.2
Ø 6mm Drill
1 INCH

Figure B
INSTALLATION (SETUP)
PERFECTION IS OUR TRADITION™
pg. 5
Insert the wall anchors into the pre-drilled holes as shown in Figure B.
Place the shower panel brackets aligned with the drilled holes and using a Philips screw-
driver tighten the screws to secure the brackets.
Step B
Step C
Figure C

Figure 1
INSTALLATION (HANDSHOWER)
PERFECTION IS OUR TRADITION™
pg. 6
Insert the shower wand holder through the pre-drilled hole on the shower panel.
Install the water supply hose for the shower wand onto the holder, as shown.
Make sure all O-rings are inserted to prevent leakage.
Once the shower panel is fully installed and hung on the bracket, you can install the shower
wand hose to the holder connection.
Step 1A
Step 1B
Step 1C
Step 1D

Figure 2
INSTALLATION (HANDSHOWER)
PERFECTION IS OUR TRADITION™
pg. 7
Finally, install the shower wand to the hose, as shown.Step 2A
1 Setting
Hand
Shower
3 Setting
Hand
Shower
or

INSTALLATION
PERFECTION IS OUR TRADITION™
Figure 3
pg. 8
Hold the plastic base against the wall, connect the 1/2" brass extender joint to the
existing outlet. Use waterproof plumbing tape to secure the connection and prevent leaks
Step 3B
Remove the old existing shower head and shower head arm assembly
Step 3A
A long
B short