Anzzi KIKI SP-AZ013 User manual

INSTALL GUIDE
Model#
SP-AZ013
KIKI
PERFECTION IS OUR TRADITION™
v2.0516

Parts List Pg. 1
Before You Start Pg. 2
Spec Drawing Pg. 3
Installation Pg. 4
Care & Maintenance Pg. 11
Warranty Pg. 12
Registration Final Page
TABLE OF CONTENTS
YOUR REVIEWS MATTER!
For more information please call 1-844-44-ANZZI
or email us at [email protected]
The ANZZI™ Family thanks you for your purchase and hopes you enjoy your very own ANZZI
product for years to come! In the meantime let us know about your experience? We would love
to hear your thoughts from the packaging to the quality and function of the product.
Leave a review on www.ANZZI.com/reviews and let everyone know how satisfied you are with
ANZZI!
Also, we humbly request submitting as many pictures as possible along with your review.
Millions of shoppers will want to know about your experience with our products. Don’t just tell
but show, too!

PERFECTION IS OUR TRADITION™
pg. 1
1. Shower Head
2. Body Jets
3. Diverter
4. Mixer
5. Hand Shower
1
2
3
4
5
1
5
6
7
8
9
12
13
14
10 11
23
4
16
17 18
19
24
20
15
22
21
28
23
25
26
27
Component no.
Component
Material
1
screw 1
s/s
2
screw 2
s/s
3
plate
s/s
4
nut
s/s
5
top shower
ABS
6
top shower part
s/s
7
Front body
glass
8
body jets
brass
9
knob
zinc
10
knob plate cover
brass
11
cartridge
brass
12
handle
zinc
13
handle plate cover
brass
14
ABS
15
16
backside body
s/s
17
washer 2
rubber
18
nut 2
brass
19
two way joint
ABS
20
one way joint
ABS
21
faucet body 2
brass
faucet body 1
thermostatic cartridge
brass
22
hand shower
ABS
23
hand shower hlolder
ABS
ABS
24
clip
s/s
25
pvc hose
PVC
26
braided hose
s/s
27
flexible hose
s/s
28
flow restricter
ASME A112.18.1/CSA B125.1

PERFECTION IS OUR TRADITION™
pg. 2
For any questions or concerns contact
our dedicated technical support team
at 1-844-44-ANZZI.
BEFORE YOU START
Screwdriver Channel Locks
Adjustable Wrench Allen key
Goggles
Teflon tape
Recommended Items
ATTENTION: Please read all instructions thoroughly
including all warnings, attentions and notes before
beginning installation.

PERFECTION IS OUR TRADITION™
pg. 3
SP-AZ013
Material: Stainless steel & Tempered Glass
Finish: Brushed & Dark Wood style
Handles: 4
Jets: 6
Shower: 2.99” x 6.535“
Sprayer: 60” reach
Weight: 24.91 lbs
Height: 59.05”
Supply: 1/2” connections
Flow: 1.8 gpm
*when reducer is removed
Features
Heavy Rain™ Fixed Showerhead
Acu-Stream™ high pressure body jets
Euro-Grip™ hand held sprayer
20.47”
7.87”
59.05”

Figure A
INSTALLATION (SETUP)
PERFECTION IS OUR TRADITION™
pg. 4
Before drilling any holes for the shower panel brackets, ensure there are no hidden cables or
pipelines aligned with the desired drilling position.
Drill the two holes for the top bracket 1” apart at the desired height.
Drill the two holes for the bottom bracket 1” apart below the top bracket.
IMPORTANT
Step A
Step A.2
Ø 6mm Drill
1 INCH

Figure B
INSTALLATION (SETUP)
PERFECTION IS OUR TRADITION™
pg. 5
Insert the wall anchors into the pre-drilled holes as shown in Figure B.
Place the shower panel brackets aligned with the drilled holes and using a Philips screw-
driver ighten the screws to secure the brackets.
Step B
Step C
Figure C

Figure 1
PERFECTION IS OUR TRADITION™
pg. 6
Insert the hand shower holder through the pre-drilled hole on the shower panel.
Install the water supply hose for the hand shower onto the holder, as shown.
Make sure all O-rings are inserted to prevent leakage.
Once the shower panel is fully installed and hung on the bracket, you can install the hand
shower hose to the holder connection.
Step 1A
Step 1B
Step 1C
Step 1D

Figure 2
Standard
Hand
Shower
3 Setting
Hand
Shower
or
INSTALLATION (HANDSHOWER)
PERFECTION IS OUR TRADITION™
pg. 7
Finally, install the hand shower to the hose, as shown.Step 2A

Figure 3
INSTALLATION (SHOWER HEAD)
PERFECTION IS OUR TRADITION™
pg. 8
Place and align the top shower panel with the pre-drilled holes on the top side of the wall
mounted panel.
Using the screws and washers provided, secure the top panel with the wall mounted panel.
Once the top panel is set in place you can continue with the wall mounting process.
Step 3A
Step 3B
Step 3C